Old 02-23-21, 10:39 AM
  #18  
juvela
Senior Member
 
juvela's Avatar
 
Join Date: Feb 2013
Location: Alta California
Posts: 14,251
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3807 Post(s)
Liked 3,331 Times in 2,173 Posts
-----

dates on headplate -

these refer to victories achieved on Frejus branded cycles

the year markings are not all inclusive, nor do they go on forever

your head emblem can be a useful tool in date bracketing the cycle

as you examine the examples available online and here at the forum you can check to see what the next later date is that appears on a Frejus headplate to bracket the date of manufacture of your example

---

chainset and mech capacity -

if you go to three-bolt chainwheels the chainset's 116mm BCD has a lower limit of 36T

you will need the check the back side of the spider arms to see if they are machined to accept a chainwheel directly up against them...and then there is the matter of spacing between the chainwheels...

if you elect to change you can also go to a smaller outer which will make things both easier on you and on the cycle's Campag GS front mech

it is perfectly adequate to handle the ten tooth difference of a 36-46 chainwheel set for example


its later cousin, the mechanically identical Campag Valentino front mech, was routinely fitted to cycles which came with a 40-52 chainset

​​​​​​​
-----

Last edited by juvela; 02-23-21 at 10:46 AM. Reason: addition
juvela is offline