View Single Post
Old 12-04-22, 04:57 PM
  #2  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,003

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4172 Post(s)
Liked 3,792 Times in 2,271 Posts
As long as the replacement will fit the hub's axle ends and position the hub/rim/wheel properly WRT the frame and fit the drop outs and fit the QR skewer they will work.

But the fitting the axle ends and being of correct lengths might be the real challenge as very few companies will purposely make their parts be able to fit other brands (of course this hub is quite likely a contracted out badge labeled one so finding out other "brands" made by the same factory might be a path). Andy
__________________
AndrewRStewart
Andrew R Stewart is offline