Originally Posted by
honeybunner
Very cool product, would you happen to have figures on hand for how much it would weigh fully cut down?
Trimming the steerer tube portion down to its minimum height will shave 35-40 grams off the weight depending on the height of your stem (typically 38-45mm). To further reduce weight, you can also then trim the unused portion of the steel stud (on underside of the top cap going to the cone wedge) to remove another ~20 grams. You’ll want to paint the cut face to keep it from rusting or at least coat it with grease.
So starting from 265 grams, you should be at 205-210 grams once cut down.