Old 04-13-22, 04:35 AM
  #9  
verktyg 
verktyg
 
verktyg's Avatar
 
Join Date: Jul 2006
Location: SF Bay Area
Posts: 4,030

Bikes: Current favorites: 1988 Peugeot Birraritz, 1984 Gitane Super Corsa, 1980s DeRosa, 1981 Bianchi Campione Del Mondo, 1992 Paramount OS, 1988 Colnago Technos, 1985 RalieghUSA SBDU Team Pro

Mentioned: 207 Post(s)
Tagged: 0 Thread(s)
Quoted: 1036 Post(s)
Liked 1,238 Times in 654 Posts
Stand Over Height

tajimirich 57 is most likely the top tube length - 57cm center to center.

A more critical dimension is the stand over height. Lying on the ground writhing in exquisite pain is not something most folks look forward to.

This is an old Schwinn bike fitting guide. You should be able to straddle the top tube without making contact with your "personal area' should you have to come to an emergency stop.

The "Proper Rider Adjustment" is not that important when selecting a proper fitting frame. Stand Over Height is.



The way we used to do the initial fitting to determine the best frame size was to have the customer place a 1" x 1' round object between their legs with at least 1" clearance under the contact point. Then we measured the height from the floor to the top of the object. Another way was to have them stand over several different size bikes.

Back then, lower priced bikes only came in a limited offering of sizes: i.e. 54cm, 58cm, 62cm.

Too small a frame size by an inch or so is better than too big.

As far as CraigsList/eBay listings - "fits people 5'8" to 6'2" is just plain STUPID! There IS NO AVERAGE!

I used to be 5'11" with a 29" inseam - short legs long torso. Now I'm 5'9" with a 28" inseam. A 55cm frame is the sweet spot for me but some fools or experts who apparently have no understanding of human anatomy would say a 60cm would fit me!

Hope this helps.

verktyg
__________________
Don't believe everything you think! History is written by those who weren't there....

Chas. ;-)

verktyg is offline  
Likes For verktyg: