ISO and For Trade thread parts 2 and 3.
Hello all, I'm looking for a decent set of pedals with cages/clips preferably in black.
also I'm looking for some black brake levers, dia compe would be great, but I'm not looking for any specific brands.
edit: I'm also looking for a saddle; again, no specific brand. Somthing black, nice/cool looking. I'm working on a c'dale black lightning.
Edit: iso a 27.2 seat post, black would be great but anything will work at this point!
To trade I have a great looking tange seiki Levin headset, dia compe ac300g brake set (with possibly the levers if I can find some in black), a couple sets of handle bars, also a band new thredless stem adapter
Let me know if you're interested in anything thanks!
-Ryan
also I'm looking for some black brake levers, dia compe would be great, but I'm not looking for any specific brands.
edit: I'm also looking for a saddle; again, no specific brand. Somthing black, nice/cool looking. I'm working on a c'dale black lightning.
Edit: iso a 27.2 seat post, black would be great but anything will work at this point!
To trade I have a great looking tange seiki Levin headset, dia compe ac300g brake set (with possibly the levers if I can find some in black), a couple sets of handle bars, also a band new thredless stem adapter
Let me know if you're interested in anything thanks!
-Ryan
Last edited by xRyan; 07-30-15 at 11:28 AM.
PM me your cotters
@francophile, I'd pick up a Wald rear rack. Totally C&V and mounts to the brake bridge.
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,807
Bikes: It's complicated.
Liked 6,175 Times
in
2,403 Posts
ISO: Cardiff Goodwick bag, new or used
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 41,057
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Liked 3,052 Times
in
1,725 Posts
Hello all, I'm looking for a decent set of pedals with cages/clips preferably in black.
also I'm looking for some black brake levers, dia compe would be great, but I'm not looking for any specific brands.
To trade I have a great looking tange seiki Levin headset, dia compe ac300g brake set (with possibly the levers if I can find some in black), a couple sets of handle bars, also a band new thredless stem adapter
Let me know if you're interested in anything thanks!
-Ryan
also I'm looking for some black brake levers, dia compe would be great, but I'm not looking for any specific brands.
To trade I have a great looking tange seiki Levin headset, dia compe ac300g brake set (with possibly the levers if I can find some in black), a couple sets of handle bars, also a band new thredless stem adapter
Let me know if you're interested in anything thanks!
-Ryan
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
PM me your cotters
WTT: Imported Peugeot PX-8 frame with Swiss BB, all stripped and ready to go off for powder or spray? This isn't a standard UE-8/9/10 or UO-8/9/10. I can shoot xtra pics if needed. I can also supply Swiss BB cups with smooth races and the headset assembly if necessary. I'm project-heavy right now and need to offload.
ISO parts to complete the following bikes:
Good project for someone, or good replacement for a wrecked bike.
ISO parts to complete the following bikes:
'84 Raleigh Super Course, '84 Peugeot PH10L, '84 Peugeot PGN10. I'm always looking for French stuff, and I'm in desperate need of a full headset for the PH10L right now, and I'm always looking for brake/shifter housing and cables, preferably silver (/clear) or white.
This PX-8 frame is provisioned for fenders, has wiring tabs under downtube and rear, vertically drilled rear brake/fender mount, generator tab, rack tabs and TRELOCK wheel lock system on the seat stays. The frame is straight, only minor surface rust and minor scuffs, no deep gouges, bends or cracks. Good project for someone, or good replacement for a wrecked bike.
Last edited by francophile; 07-27-15 at 10:49 AM.
Senior Member
Hello all, I'm looking for a decent set of pedals with cages/clips preferably in black.
also I'm looking for some black brake levers, dia compe would be great, but I'm not looking for any specific brands.
edit: I'm also looking for a saddle; again, no specific brand. Somthing black, nice/cool looking. I'm working on a c'dale black lightning.
To trade I have a great looking tange seiki Levin headset, dia compe ac300g brake set (with possibly the levers if I can find some in black), a couple sets of handle bars, also a band new thredless stem adapter
Let me know if you're interested in anything thanks!
-Ryan
also I'm looking for some black brake levers, dia compe would be great, but I'm not looking for any specific brands.
edit: I'm also looking for a saddle; again, no specific brand. Somthing black, nice/cool looking. I'm working on a c'dale black lightning.
To trade I have a great looking tange seiki Levin headset, dia compe ac300g brake set (with possibly the levers if I can find some in black), a couple sets of handle bars, also a band new thredless stem adapter
Let me know if you're interested in anything thanks!
-Ryan
i have aver a couple of blk saddles that would go with a lightning, PM me.
ISO: 50t (or maybe 52t) 144 BCD chainring -- "classic" style (Campy, Sugino, whatever)
Have: Sugino 45t 144 BCD ring, drilled, good condition. Other bits...
Have: Sugino 45t 144 BCD ring, drilled, good condition. Other bits...
1/2 as far in 2x the time
Join Date: Nov 2013
Location: Northern Bergen County, NJ
Posts: 1,746
Bikes: Yes, Please.
Liked 286 Times
in
222 Posts
Senior Member
Hello all, I'm looking for a decent set of pedals with cages/clips preferably in black.
also I'm looking for some black brake levers, dia compe would be great, but I'm not looking for any specific brands.
edit: I'm also looking for a saddle; again, no specific brand. Somthing black, nice/cool looking. I'm working on a c'dale black lightning.
To trade I have a great looking tange seiki Levin headset, dia compe ac300g brake set (with possibly the levers if I can find some in black), a couple sets of handle bars, also a band new thredless stem adapter
Let me know if you're interested in anything thanks!
-Ryan
also I'm looking for some black brake levers, dia compe would be great, but I'm not looking for any specific brands.
edit: I'm also looking for a saddle; again, no specific brand. Somthing black, nice/cool looking. I'm working on a c'dale black lightning.
To trade I have a great looking tange seiki Levin headset, dia compe ac300g brake set (with possibly the levers if I can find some in black), a couple sets of handle bars, also a band new thredless stem adapter
Let me know if you're interested in anything thanks!
-Ryan
Just in case, but as I would say. An unknown saddle is best bought while in hand. Buy only those models you have direct previous experience with.
Save dissapointment and pain latter
Junior Member
Join Date: May 2012
Location: Boston
Posts: 158
Bikes: More than the boss realizes...
Likes: 0
Liked 0 Times
in
0 Posts
ISO: Small Brake Parts - Suntour and Dia-Compe
ISO: Small Brake Parts:
1. Brake Cable Anchor hardware for Suntour caliper brake...as pictured here. Looking for both the nut and the bolt.
https://i.imgur.com/9SmVw1Z.jpg
2. Cable Adjuster Boss for Dia-Comp 400 Caliper. I have the adjustment mechanism, just need the part that mounts to the caliper arm
https://i.imgur.com/vK2F3J2.jpg
Thanks!
1. Brake Cable Anchor hardware for Suntour caliper brake...as pictured here. Looking for both the nut and the bolt.
https://i.imgur.com/9SmVw1Z.jpg
2. Cable Adjuster Boss for Dia-Comp 400 Caliper. I have the adjustment mechanism, just need the part that mounts to the caliper arm
https://i.imgur.com/vK2F3J2.jpg
Thanks!
Senior Member
ISO: Simplex bar-end shifters.
Have: All kinds of stuff, mostly English and French from the 50s to the 90s. Let me know what you're looking for.
Have: All kinds of stuff, mostly English and French from the 50s to the 90s. Let me know what you're looking for.
Senior Member
ISO:
Shimano 600 27.2 seat post. Any of the variants (aero, etc...)
Have--
A lot of parts to spare at the moment. Even frames. Will gladly slant the trade in your favor. thanks!
Shimano 600 27.2 seat post. Any of the variants (aero, etc...)
Have--
A lot of parts to spare at the moment. Even frames. Will gladly slant the trade in your favor. thanks!
Senior Member
Senior Member
Join Date: Aug 2009
Location: Berkeley, CA
Posts: 7,389
Bikes: '72 Cilo Pacer, '72 Gitane Gran Tourisme, '72 Peugeot PX10, '73 Speedwell Ti, '74 Peugeot UE-8, '75 Peugeot PR-10L, '80 Colnago Super, '85 De Rosa Pro, '86 Look Equipe 753, '86 Look KG86, '89 Parkpre Team, '90 Parkpre Team MTB, '90 Merlin
Liked 2,700 Times
in
653 Posts
ISO/WTT: 110mm Dura Ace 7400 stem
HAVE: 100mm Dura Ace 7400 stem
Mine's just a bit shorter than I'd like. Thanks.
HAVE: 100mm Dura Ace 7400 stem
Mine's just a bit shorter than I'd like. Thanks.
Last edited by gaucho777; 07-29-15 at 06:23 PM.
PM me your cotters
master of the burrito art
Join Date: Aug 2014
Location: Orange County
Posts: 187
Likes: 0
Liked 0 Times
in
0 Posts
need: suntour bar end shifters.
have: deer head derailleurs. front and rear. deer head shifters. suntour arx front derailleur for triple crank. suntour xc 27.2 seatpost shimano b124 triple crankset with bottom bracket 28-38-48 biopace rings. deore 6 speed thumb shifters.
have: deer head derailleurs. front and rear. deer head shifters. suntour arx front derailleur for triple crank. suntour xc 27.2 seatpost shimano b124 triple crankset with bottom bracket 28-38-48 biopace rings. deore 6 speed thumb shifters.
If I own it, I ride it
Join Date: Nov 2005
Location: Cardinal Country
Posts: 5,616
Bikes: Lejeune(14), Raleigh, Raysport, Jan De Reus, Gazelle, Masi, B. Carré(4), Springfield, Greg Lemond, Andre Bertin, Schwinn Paramount
Likes: 0
Liked 696 Times
in
320 Posts
Have: 120mm Cinelli XA
Want: 90-100mm Cinelli 1A old logo or 1R
Want: 90-100mm Cinelli 1A old logo or 1R
Senior Member
I have a full '74 and '78 headset I could use but it looks really clunky, the top nut is way different, the 70's headsets feel noticeably heavier. It's possible any French-threaded headset could work if they have a tabbed lockring instead of on with a flat. I'm specifically looking for this. Only for reference, this is the difference in the headset stack on a 74 vs 84 Peugeot, the '74 is talle, fatter, not as svelte (honestly, I don't even like the expensive Competition headsets):
Senior Member
Still looking................
ISO...........Nuovo Record jockey wheel for the 4th version (Velobase) RD.
Looks like VeloBase.com - Component: Campagnolo 1020/A, Nuovo Record (version 4)
Have............lots of "stuff"
Looks like VeloBase.com - Component: Campagnolo 1020/A, Nuovo Record (version 4)
Have............lots of "stuff"
__________________
Be where your feet are.......Lisa Bluder
Be where your feet are.......Lisa Bluder
Senior Member
Join Date: Jan 2013
Posts: 2,835
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Liked 678 Times
in
464 Posts
Have:two very nice FD-7400 28.6 clamp only Need:FD-7400 braze on or clamp that can be removed, you can keep the clamp if you want
Last edited by easyupbug; 07-30-15 at 07:59 PM. Reason: typo
Senior Member
Need/Want: Wolber GTX 32 hole rim ('91 RB-1 rehab project)
Have: Couple of first gen Cyclone RD's, long cage
Dura Ace 7400 braze on FD
105 FD, clamp on
600 TriColor RD, light rash
More stuff I can't recall
Have: Couple of first gen Cyclone RD's, long cage
Dura Ace 7400 braze on FD
105 FD, clamp on
600 TriColor RD, light rash
More stuff I can't recall
__________________
My bikes: '81 Trek 957, '83 Trek 720, '85 Trek 500, '85 Trek 770,'81 Merckx, '85 Centurion Cinelli, '85 Raleigh Portage, '92 RB-2, '09 Bianchi
My bikes: '81 Trek 957, '83 Trek 720, '85 Trek 500, '85 Trek 770,
Banned.
Join Date: May 2011
Location: on the beach
Posts: 4,816
Bikes: '73 falcon sr, '76 grand record, '84 davidson
Likes: 0
Liked 25 Times
in
18 Posts
iso: two keyed washers from kkt pro ace pedals, like this:
washer dimensions:
13mm outside diameter
7mm inside diameter
1mm long (missing) key/tooth
2mm washer depth
op: https://www.bikeforums.net/classic-vi...l#post18032419
washer dimensions:
13mm outside diameter
7mm inside diameter
1mm long (missing) key/tooth
2mm washer depth
op: https://www.bikeforums.net/classic-vi...l#post18032419
Junior Member
Join Date: Jun 2015
Location: Atlanta
Posts: 18
Bikes: 86 Centurion Ironman
Likes: 0
Liked 4 Times
in
2 Posts
WTT: Shimano 105 short reach brake dual pivot calipers in great shape. br-1055
ISO: Shimano 105 long reach brake calipers or any long reach brake caliper.
heres what i've got
ISO: Shimano 105 long reach brake calipers or any long reach brake caliper.
heres what i've got
Senior Member
Join Date: Sep 2011
Location: Baltimore MD
Posts: 3,344
Bikes: '72 Motobecane Grand Record, '72 Gitane tandem, '72 Raleigh Super Course, '73 Raleigh Gran Sport, '73 Colnago Super, '76 Fiorelli Coppi, '78 Raleigh SBDU Team Pro, '78 Trek 930, '81 Holdsworth Special 650B, '86 Masi GC, ’94 Bridgestone RB-T
Liked 530 Times
in
286 Posts
ISO/WTT:
Looking for 172.5 crank arms:
> TA, Stronglight, VO in 50.4 bcd.
> Campy NR/SR strada double
> Avocet triple
Have for trade many of same:
> TA 170
> Stronglight 49d 170
> Campy NR/SR double or triple 170
> Avocet triple 175
Looking for 172.5 crank arms:
> TA, Stronglight, VO in 50.4 bcd.
> Campy NR/SR strada double
> Avocet triple
Have for trade many of same:
> TA 170
> Stronglight 49d 170
> Campy NR/SR double or triple 170
> Avocet triple 175
__________________
The man who dies with the most toys…is dead. - Rootboy
The man who dies with the most toys…is dead. - Rootboy