What do old people ride, lets see your bikes
#2101
Old Boy
Join Date: Jan 2016
Location: Minnesota
Posts: 2,127
Bikes: Mostly 1st-generation, top-of-the-line, non-unicrown MTBs/ATBs: All 1984 models: Dawes Ranger, Peugeot Canyon Express, Ross Mt. Whitney (chrome), Schwinn High Sierra, and a 1983 Trek 850.
Liked 1,721 Times
in
613 Posts
And the rest of you guys... wow. TimothyH with the sketchy perspective from the side of the bridge... bravo!
The skies are grey here and the weather drizzly. Not the best environment to ride in, let alone take a nice camera. But as soon as the clouds lift and the Fall Colors start to show, I'll be out there with my classic lugged steel bikes and my Leica.
.
__________________
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
Last edited by DQRider; 10-05-18 at 08:37 PM.
Likes For Igotdibs:
#2105
Senior Member
Join Date: Mar 2010
Location: Eastern NC
Posts: 305
Bikes: '81 Puch '13 Cafe Noir
Likes: 0
Liked 3 Times
in
1 Post
.
Pashley Path Racer - built from an early `70s Pashley Roadster - called a "Scorcher"
This bike will eventually get a Sturmey Archer internal geared hub, but for the moment it is a nice, lightweight, comfy single-speed.
That beautiful, slack frame soaks up all the bumps and potholes in our roads and paths.
Pashley is like the Rolls Royce of bicycles. Still hand-built in Stratford-upon-Avon, birthplace of Shakespeare. But I don't think he rode one....
.
Pashley Path Racer - built from an early `70s Pashley Roadster - called a "Scorcher"
This bike will eventually get a Sturmey Archer internal geared hub, but for the moment it is a nice, lightweight, comfy single-speed.
That beautiful, slack frame soaks up all the bumps and potholes in our roads and paths.
Pashley is like the Rolls Royce of bicycles. Still hand-built in Stratford-upon-Avon, birthplace of Shakespeare. But I don't think he rode one....
.
#2106
Senior Member
Just added this for the grocery getter.
Likes For mackgoo:
#2107
Old Boy
Join Date: Jan 2016
Location: Minnesota
Posts: 2,127
Bikes: Mostly 1st-generation, top-of-the-line, non-unicrown MTBs/ATBs: All 1984 models: Dawes Ranger, Peugeot Canyon Express, Ross Mt. Whitney (chrome), Schwinn High Sierra, and a 1983 Trek 850.
Liked 1,721 Times
in
613 Posts
I think this is because the company built work-bikes in England for most of its history, and only recently have they become a more upscale marque, exporting these beautiful hand-built Roadsters and All-Round Bikes to the world. I think of them as a sort-of Rolls Royce of bicycles. It will be interesting to see where they go from here.
One of the things I brought home with me from the swap meet was a 1967 Sturmey-Archer TCW III 3-speed coaster brake hub. I was thinking that this would be perfect for "Pepper" (The name I've given her - stands for Pashley Path Racer). Just add a top-tube quadrant shifter, and I'd really have something special. But now that I have it home, and have done some research, I'm a bit worried. None other than the late, lamented Sheldon Brown has this to say about the TCW hub:
"The TCW series is particularly notorious for unreliability. They had so much trouble with the original TCW that the re-designed it, and came out with the TCW Mark II.This was still a problem, so they came out with the TCW Mark III and later the TCW Mark IV.All four of these hubs shared a fundamental design flaw:They ran the brake through the gear train. This means that when you're in high gear, when you would be most likely to be going fast...the brake is at its weakest!Even worse, if your shifter is mis-adjusted and you accidentally shift into the "neutral" position between 2nd and 3rd gear, the brake will not work at all!This flaw was so dangerous that Consumer Reports magazine rated the TCW "unacceptable."
Yikes! This one is a Mk III, so it's still one of the bad ones. I guess I'll stick with the single-speed drum brake drivetrain for now. I'm afraid the TCW hub may end up as a paperweight on my desk at work.
.
__________________
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
Last edited by DQRider; 10-07-18 at 01:44 PM.
#2108
Senior Member
Join Date: Oct 2011
Location: Phx, AZ
Posts: 2,141
Bikes: Trek Mtn Bike
Liked 2,867 Times
in
1,030 Posts
[img]
Murals by res1due, on Flickr
[img]
Looking back at 24th St by res1due, on Flickr
[img]
Burrowing Owl by res1due, on Flickr
[img]
Parking at 15th Ave by res1due, on Flickr
Murals by res1due, on Flickr
[img]
Looking back at 24th St by res1due, on Flickr
[img]
Burrowing Owl by res1due, on Flickr
[img]
Parking at 15th Ave by res1due, on Flickr
#2109
Senior Member
Join Date: Mar 2010
Location: Eastern NC
Posts: 305
Bikes: '81 Puch '13 Cafe Noir
Likes: 0
Liked 3 Times
in
1 Post
Wow. Thanks Tim! I appreciate that, and you're right, this one is a Keeper.
Well, thank you, sir. I agree about the dearth of this venerable old brand. Today I attended a bicycle swap meet in Blaine, MN, and mentioned this bike. Folks there had never heard of Pashley, and I get the same reaction elsewhere.
I think this is because the company built work-bikes in England for most of its history, and only recently have they become a more upscale marque, exporting these beautiful hand-built Roadsters and All-Round Bikes to the world. I think of them as a sort-of Rolls Royce of bicycles. It will be interesting to see where they go from here.
One of the things I brought home with me from the swap meet was a 1967 Sturmey-Archer TCW III 3-speed coaster brake hub. I was thinking that this would be perfect for "Pepper" (The name I've given her - stands for Pashley Path Racer). Just add a top-tube quadrant shifter, and I'd really have something special. But now that I have it home, and have done some research, I'm a bit worried. None other than the late, lamented Sheldon Brown has this to say about the TCW hub:
"The TCW series is particularly notorious for unreliability. They had so much trouble with the original TCW that the re-designed it, and came out with the TCW Mark II.This was still a problem, so they came out with the TCW Mark III and later the TCW Mark IV.All four of these hubs shared a fundamental design flaw:They ran the brake through the gear train. This means that when you're in high gear, when you would be most likely to be going fast...the brake is at its weakest!Even worse, if your shifter is mis-adjusted and you accidentally shift into the "neutral" position between 2nd and 3rd gear, the brake will not work at all!This flaw was so dangerous that Consumer Reports magazine rated the TCW "unacceptable."
Yikes! This one is a Mk III, so it's still one of the bad ones. I guess I'll stick with the single-speed drum brake drivetrain for now. I'm afraid the TCW hub may end up as a paperweight on my desk at work.
.
Well, thank you, sir. I agree about the dearth of this venerable old brand. Today I attended a bicycle swap meet in Blaine, MN, and mentioned this bike. Folks there had never heard of Pashley, and I get the same reaction elsewhere.
I think this is because the company built work-bikes in England for most of its history, and only recently have they become a more upscale marque, exporting these beautiful hand-built Roadsters and All-Round Bikes to the world. I think of them as a sort-of Rolls Royce of bicycles. It will be interesting to see where they go from here.
One of the things I brought home with me from the swap meet was a 1967 Sturmey-Archer TCW III 3-speed coaster brake hub. I was thinking that this would be perfect for "Pepper" (The name I've given her - stands for Pashley Path Racer). Just add a top-tube quadrant shifter, and I'd really have something special. But now that I have it home, and have done some research, I'm a bit worried. None other than the late, lamented Sheldon Brown has this to say about the TCW hub:
"The TCW series is particularly notorious for unreliability. They had so much trouble with the original TCW that the re-designed it, and came out with the TCW Mark II.This was still a problem, so they came out with the TCW Mark III and later the TCW Mark IV.All four of these hubs shared a fundamental design flaw:They ran the brake through the gear train. This means that when you're in high gear, when you would be most likely to be going fast...the brake is at its weakest!Even worse, if your shifter is mis-adjusted and you accidentally shift into the "neutral" position between 2nd and 3rd gear, the brake will not work at all!This flaw was so dangerous that Consumer Reports magazine rated the TCW "unacceptable."
Yikes! This one is a Mk III, so it's still one of the bad ones. I guess I'll stick with the single-speed drum brake drivetrain for now. I'm afraid the TCW hub may end up as a paperweight on my desk at work.
.
#2110
Senior Member
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 26,280
Liked 10,210 Times
in
4,952 Posts
#2111
Senior Member
#2112
Senior Member
2014 Focus Izalco Ergoride 2.0
2009 Dynamic Synergy (8-Speed Alfine Hub)
Last edited by DrDyno; 12-25-18 at 03:07 PM.
#2113
Palmer
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,798
Bikes: Mike Melton custom, Alex Moulton AM, Dahon Curl
Liked 1,978 Times
in
1,138 Posts
Hmph. My browser + computer + Bike Forums really really really doesn't want me to include a link to that song. Shrug. Interested parties could google it.
Last edited by tcs; 10-09-18 at 08:10 AM.
#2114
Senior Member
Join Date: Oct 2018
Location: Thornhill, Canada
Posts: 777
Bikes: QU-AX Uni, United Motocross BMX, Specialized Langster, Giant OCR, Marin Muirwoods, Globe Roll2, VROD:)
Liked 430 Times
in
259 Posts
Been riding the neighbourhood bike paths on my latest addition. My wife thinks the pace of this bike suits this 58yr old fart....
Felt Speedway 2spd/coaster brake
Felt Speedway 2spd/coaster brake
Last edited by Speedway2; 10-10-18 at 06:21 PM.
Likes For Speedway2:
#2115
Senior Member
I am still riding the bikes that caught my eye in the seventies! Some I could not afford so now I can and enjoy as if it were 1973! The only bike I could afford(still pretty expensive) was a Diamond Formula Kabuki which was one of the lightest bikes of its time and I still ride it. It is nothing too special , just sentimental so I upgraded it with Campy period correct NR or SR. The others I keep mostly original as part of the enjoyment is historical. Joe
#2116
Senior Member
Join Date: Aug 2018
Location: Allen, TX
Posts: 2,736
Bikes: 2021 S-Works Turbo Creo SL, 2020 Specialized Roubaix Expert
Liked 4,345 Times
in
1,527 Posts
#2118
Member
'76 Hillman
From far away Oz: this built in 1976 by local legend George McDonald, restored last year by his now 67-year-old apprentice Gordon Hill, with assistance from other Melbourne legends Kevin Wigham (formerly maker of Paconi frames) and Kenn Dickie (who at 82 still applies lettering and pinstriping by hand). The bits are almost all Superbe Pro, gradually accumulated, and if there's anything better in the way of '70s-'80s running gear, I'd like to try it.
On Sunday I put it through 210 km and around 800 metres of climbing in our annual ride round Port Phillip Bay, and in greater comfort than any of the young Turks who've never ridden a steel frame, I'll be bound.
#2120
Senior Member
Older road bike for an older guy . (steel framed Bianchi Veloce with modern components/groupset)
Trek FX 7.4 with butterfly handlebars for gravel grinding and touring
Older Bianchi MTB I don't use that much, a few times a year.
Trek FX 7.4 with butterfly handlebars for gravel grinding and touring
Older Bianchi MTB I don't use that much, a few times a year.
#2121
Senior Member
Join Date: May 2012
Location: Point Reyes Station, California
Posts: 4,642
Bikes: Indeed!
Liked 3,806 Times
in
1,202 Posts
'76 Hillman
From far away Oz: this built in 1976 by local legend George McDonald, restored last year by his now 67-year-old apprentice Gordon Hill, with assistance from other Melbourne legends Kevin Wigham (formerly maker of Paconi frames) and Kenn Dickie (who at 82 still applies lettering and pinstriping by hand). The bits are almost all Superbe Pro, gradually accumulated, and if there's anything better in the way of '70s-'80s running gear, I'd like to try it.
On Sunday I put it through 210 km and around 800 metres of climbing in our annual ride round Port Phillip Bay, and in greater comfort than any of the young Turks who've never ridden a steel frame, I'll be bound.
I'm sure there are some folks over at the Classics and Vintage forum who would like to see some pictures of this one. We don't get to see a lot of bikes from Oz save the occasional Malvern Star.
Brent
#2124
Senior Member
Join Date: Jan 2015
Location: Bay Area CA
Posts: 66
Bikes: 2011 Rivendell Sam Hillborne, 2016 Brompton M6R, 2017 Ritchey Timberwolf
Likes: 0
Liked 2 Times
in
2 Posts
2011 Rivendell Hillborne for almost anything.
2016 Brompton M6R for work.
2017 Ritchey Timberwolf for fun.
Last edited by surlyprof; 10-15-18 at 02:06 PM. Reason: spelling error
#2125
Senior Member
Join Date: Nov 2009
Location: Chicago
Posts: 1,223
Bikes: 2012 Moots VaMoots-74 Peugeot Mixtie U018-73 Peugeot U018
Likes: 0
Liked 11 Times
in
9 Posts
Current Rides
1995 Cinelli SC with Campagnolo Groupe, 2004 Colnago C40 with Campagnolo Groupe and 2012 Moots Vamoots.
__________________
Moots VaMoots 2012-Peugeot Mixte 1974-Peugeot Mixte 1973
Moots VaMoots 2012-Peugeot Mixte 1974-Peugeot Mixte 1973