1978 Motobecane Grand Jubile
#1
Senior Member
Thread Starter
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,697
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1946 Post(s)
Liked 2,004 Times
in
1,105 Posts
1978 Motobecane Grand Jubile
It's missing the original seat but everything else is there. Most of the wear and tear is garage bruising as the chain is 0% stretched and the RD pulleys look fresh.
What's it worth?
What's it worth?
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
#2
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,433
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
It’s worth $80 all day long. Buy the bike and ask questions later. Vitus 172 is fine tubing and that is a classic motobecane color scheme.
#3
Senior Member
Join Date: Jan 2016
Posts: 3,442
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 872 Post(s)
Liked 2,272 Times
in
1,274 Posts
Those first gen Cyclones are very nice and the Grand Jubilee is a high end model. I would say about $250 , maybe more if it is as good as the picture shows. If it is your size that is a good buy, I don’t think you will find another .
#4
Senior Member
Don't forget to re-route the chain correctly through the RD before your first ride!
__________________
I.C.
I.C.
Likes For Insidious C.:
#5
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18354 Post(s)
Liked 4,502 Times
in
3,346 Posts
I agree with above. $80 is a steal. The original price of $260 wouldn't have been bad.
I see it says "SOLD".
#6
Senior Member
Thread Starter
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,697
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1946 Post(s)
Liked 2,004 Times
in
1,105 Posts
Cool. Thanks all. I bought it. Seatpost seat tube junction needed a little fine tuning and the seat clamp bolt was scary buggered but all is well. Too much fun.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
#7
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18354 Post(s)
Liked 4,502 Times
in
3,346 Posts
Keep in mind that the French sizes may be off slightly from ISO. So, you'll have to watch parts from pedals to freewheels.
I can't guarantee what is on your bike, but be careful when replacing parts.
I can't guarantee what is on your bike, but be careful when replacing parts.
#8
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,433
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
#9
Senior Member
Join Date: Nov 2010
Posts: 3,504
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 586 Post(s)
Liked 612 Times
in
447 Posts
Congrats on the bargain. You'll love it. I've always liked the Motos and I currently own two, a Grand Jubile and a Grand Record. The Jubile is Reynolds 531 while the Grand Record is Vitus. Love them both.
#10
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,749 Times
in
937 Posts
The OP will love his Motobecane Grand Prix. Of that I am certain, assuming it is a good fit.
My Motobecane was one of my favorite bicycles. The black tubes with red head tube, coupled with that lovely head badge, was a treat to the eye. And the ride quality was nothing short of darn near perfect. I did upgrade my bike in the cosmetics area and, perhaps, a wee bit in the performance category as well. I can honestly tell you that my bike was sold internationally and fetched more than ten times what the OP's cost.
It was the perfect cottage road machine and saw many country miles on little travelled roads fitted as seen below...
A fellow expressed interest in purchasing it, asking for a more road bike appearance and handling quality, It went out the door looking like this...
My Motobecane was one of my favorite bicycles. The black tubes with red head tube, coupled with that lovely head badge, was a treat to the eye. And the ride quality was nothing short of darn near perfect. I did upgrade my bike in the cosmetics area and, perhaps, a wee bit in the performance category as well. I can honestly tell you that my bike was sold internationally and fetched more than ten times what the OP's cost.
It was the perfect cottage road machine and saw many country miles on little travelled roads fitted as seen below...
A fellow expressed interest in purchasing it, asking for a more road bike appearance and handling quality, It went out the door looking like this...
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
#11
Senior Member
Thread Starter
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,697
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1946 Post(s)
Liked 2,004 Times
in
1,105 Posts
Quick ride today
My intention was to put my nice 700c wheels with nice tires on this one by replacing the rear Weinmann 610 with a 750. I even ordered a NOS brake before I started cleaning and greasing the bike. Turns out that both 610s are at the bottom of their slots with the 27" Rigidas and the rear is dangerously close to the tire. Maybe that explains why this bike has so few miles on it.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
Last edited by Classtime; 11-22-21 at 12:26 AM.
#12
Senior Member
Join Date: Jan 2016
Posts: 3,442
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 872 Post(s)
Liked 2,272 Times
in
1,274 Posts
Wow! That bike cleaned up even better than I would expect. I really don't mind 27" wheels as long as I can continue to get the Pasela's that I like. I have the opposite problem with my recently acquired Raleigh Pro MarkV. The 27" wheels with Campy HF Record hubs I was going to use are just too big to work on the frame. Nice photo of a perfect ride day on a new machine. We had howling Santa Anna winds up here so no ride for me. I just continued working on the Colnago , still messing with the Phil Woods BB and chain line.
#13
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,433
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
Nice score. I would not mind picking up a vitus 172 Motobecane like that. This is a fine bike and a great price.
#14
Junior Member
Join Date: Oct 2021
Location: Northern Virginia
Posts: 109
Bikes: Motobecane Grand Record, Motobecane Super Mirage (3x5 speeds), Motobecane Mirage, Atala (unknown model), Peugeot mixte frame Tourist and Schwinn Sport. A bunch more kids bikes. Most recently a Trek Verve One, tricked up for serious touring.
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 39 Post(s)
Liked 43 Times
in
27 Posts
#15
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,827 Times
in
1,995 Posts
My intention was to put my nice 700c wheels with nice tires on this one by replacing the rear Weinmann 610 with a 750. I even ordered a NOS brake before I started cleaning and greasing the bike. Turns out that both 610s are at the bottom of their slots with the 27" Rigidas and the rear is dangerously close to the tire. Maybe that explains why this bike has so few miles on it.
my stomping ground.
wild that it has so much clearance.
your bike is a case where I would adjust the rear wheel all the way forward in the slots, you will gain a bit and not be so close to the tire.
Last edited by repechage; 11-27-21 at 03:26 PM.
#16
Senior Member
Thread Starter
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,697
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1946 Post(s)
Liked 2,004 Times
in
1,105 Posts
We're lucky to have such pretty roads to ride on. Ya, why would anybody braze a frame for brake blocks at the bottom (or top) of the slots. I have the axle far forward in rather short drop outs for now and a generous BF member has sent me a Vanquer 750.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
#17
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,827 Times
in
1,995 Posts
From your "on the road image", you could slide the axle 2 to 3 mm farther forward. The adjusters are exposed a bit behind the dropout, often there is some mismatch left to right, but easy 2 mm.
Likes For repechage: