F. Moser funny bike
#26
Senior Member
The OP's Moser bike is stunning and likely historically significant. If it were mine and I needed a fork for it, I'd start by visiting the Facebook page for "Moser Cicli." I don't do Facebook, so I have no idea whether it's a fan page or a current manufacturer, but give it a go.
#29
Senior Member
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,396
Bikes: Too many to list
Liked 1,127 Times
in
748 Posts
Dang i hope he fixed dem teef !
LOL -- i had to referee a fight at the HHH between Gaggioli and my GF's besties fiance (who was a Cat 2 at the time ) -- Mr Cat 2 got up in arms claiming Gaggioli was drafting him in the time trial that day and Roberto the hot blooded Italian got mad and started throwing fists !
Good times !
#30
Senior Member
Disc covers on spoked wheels were illegal in events sanctioned by the UCI and any national body associated with the ICI, such as the USCF. The discs had to be an integral structural component and not just for aerodynamics. Most of the early discs were laminated to a honeycomb core.
Likes For T-Mar:
#32
Senior Member
Dang i hope he fixed dem teef !
LOL -- i had to referee a fight at the HHH between Gaggioli and my GF's besties fiance (who was a Cat 2 at the time ) -- Mr Cat 2 got up in arms claiming Gaggioli was drafting him in the time trial that day and Roberto the hot blooded Italian got mad and started throwing fists !
Good times !
LOL -- i had to referee a fight at the HHH between Gaggioli and my GF's besties fiance (who was a Cat 2 at the time ) -- Mr Cat 2 got up in arms claiming Gaggioli was drafting him in the time trial that day and Roberto the hot blooded Italian got mad and started throwing fists !
Good times !
Likes For DMC707:
#36
aka: Mike J.
Thread Starter
I started working on the bike a little last night since I’ve decided to keep it for now. I got the front derailleur unstuck and moving a little, should be okay once I get it cleaned up and lubed.
The internally routed rear brake cable might be an issue, I don’t know if the cable housing extends internally all the way back. Cable is not stuck but not smooth either. I want to know what is what before I try to pull and replace the housing.
I’ve got my eye on one or two donor bikes to provide a temporary fork and front wheel to at least get the bike ridable.
It is going to be a project, one step at a time.
The internally routed rear brake cable might be an issue, I don’t know if the cable housing extends internally all the way back. Cable is not stuck but not smooth either. I want to know what is what before I try to pull and replace the housing.
I’ve got my eye on one or two donor bikes to provide a temporary fork and front wheel to at least get the bike ridable.
It is going to be a project, one step at a time.
__________________
= = = = = = = = = = = = = = = = = = = = = =
Life happens, don't be a spectator.
= = = = = = = = = = = = = = = = = = = = = =
Life happens, don't be a spectator.
Likes For treebound:
#37
aka: Mike J.
Thread Starter
Any guesses if one of these people on Strava is the same Roberto as above?
__________________
= = = = = = = = = = = = = = = = = = = = = =
Life happens, don't be a spectator.
= = = = = = = = = = = = = = = = = = = = = =
Life happens, don't be a spectator.
#38
Senior Member
I noticed there is a Roberto Gaggioli facebook page.
It looks like the whole family races to some extent.
https://www.facebook.com/roberto.gaggioli.3
There is also a Wikipedia page:
https://en.wikipedia.org/wiki/Roberto_Gaggioli
It says he spent a lot of time in the USA, so I assume he speaks both Italian and English.
You might reach out to him on Facebook. He may be able to authenticate your frame, and even send some photos and component lists.
It looks like the whole family races to some extent.
https://www.facebook.com/roberto.gaggioli.3
There is also a Wikipedia page:
https://en.wikipedia.org/wiki/Roberto_Gaggioli
It says he spent a lot of time in the USA, so I assume he speaks both Italian and English.
You might reach out to him on Facebook. He may be able to authenticate your frame, and even send some photos and component lists.
Likes For CliffordK:
#39
aka: Mike J.
Thread Starter
I’m back with a mock-up update.
I’ve been watching for local postings of a road bike with a 650c front wheel and center mounted brakes. Found one with 650c front and rear, but way beyond my budget. Saw a Terry bike posted, but price and I think brakes were an issue. Then today I saw this Lotus, 700c rear with 24” front wheel (25-520, 600x25c marked on the tire). 2x6 Shimano 600 group. I sold some motorcycle parts after work, so I had the bike funds to buy this donor bike on the way home from work.
There are several inches of difference in the headtube lengths, so forgive the tape wrapped pipe insulation used as a spacer to help visually mock-up the fit. If it seems close to good then I can get the 24” fork steerer tube shortened and have the threads extended.
So, how does it look? Close enough? Or should I keep watching for a 650c fork or donor bike. The paint on the Lotus frame is very chipped, Tange steel, but likely a hard-sell locally. So the Lotus will become parts either for this Moser, or some future project. I added a pic of the Lotus as a point of reference.
ps, if an admin wants to move this discussion from the valuation section to the C&V, feel free to do so since people have posted a lot of good history in this discussion (value questions can be edited out, not sure if I still have that option).
I’ve been watching for local postings of a road bike with a 650c front wheel and center mounted brakes. Found one with 650c front and rear, but way beyond my budget. Saw a Terry bike posted, but price and I think brakes were an issue. Then today I saw this Lotus, 700c rear with 24” front wheel (25-520, 600x25c marked on the tire). 2x6 Shimano 600 group. I sold some motorcycle parts after work, so I had the bike funds to buy this donor bike on the way home from work.
There are several inches of difference in the headtube lengths, so forgive the tape wrapped pipe insulation used as a spacer to help visually mock-up the fit. If it seems close to good then I can get the 24” fork steerer tube shortened and have the threads extended.
So, how does it look? Close enough? Or should I keep watching for a 650c fork or donor bike. The paint on the Lotus frame is very chipped, Tange steel, but likely a hard-sell locally. So the Lotus will become parts either for this Moser, or some future project. I added a pic of the Lotus as a point of reference.
ps, if an admin wants to move this discussion from the valuation section to the C&V, feel free to do so since people have posted a lot of good history in this discussion (value questions can be edited out, not sure if I still have that option).
Likes For treebound:
#40
aka: Mike J.
Thread Starter
I noticed there is a Roberto Gaggioli facebook page.
It looks like the whole family races to some extent.
https://www.facebook.com/roberto.gaggioli.3
There is also a Wikipedia page:
https://en.wikipedia.org/wiki/Roberto_Gaggioli
It says he spent a lot of time in the USA, so I assume he speaks both Italian and English.
You might reach out to him on Facebook. He may be able to authenticate your frame, and even send some photos and component lists.
It looks like the whole family races to some extent.
https://www.facebook.com/roberto.gaggioli.3
There is also a Wikipedia page:
https://en.wikipedia.org/wiki/Roberto_Gaggioli
It says he spent a lot of time in the USA, so I assume he speaks both Italian and English.
You might reach out to him on Facebook. He may be able to authenticate your frame, and even send some photos and component lists.
__________________
= = = = = = = = = = = = = = = = = = = = = =
Life happens, don't be a spectator.
= = = = = = = = = = = = = = = = = = = = = =
Life happens, don't be a spectator.
#41
Senior Member
Roberto Gaggioli = ( for reference, picture the typical 'Italian-playboy' image ) ....was a successful professional cyclist .... he typically avoided swimming with the big fish of the european peloton ....he won quite a few races in North America
#42
Senior Member
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,396
Bikes: Too many to list
Liked 1,127 Times
in
748 Posts
I’m back with a mock-up update.
I’ve been watching for local postings of a road bike with a 650c front wheel and center mounted brakes. Found one with 650c front and rear, but way beyond my budget. Saw a Terry bike posted, but price and I think brakes were an issue. Then today I saw this Lotus, 700c rear with 24” front wheel (25-520, 600x25c marked on the tire). 2x6 Shimano 600 group. I sold some motorcycle parts after work, so I had the bike funds to buy this donor bike on the way home from work.
There are several inches of difference in the headtube lengths, so forgive the tape wrapped pipe insulation used as a spacer to help visually mock-up the fit. If it seems close to good then I can get the 24” fork steerer tube shortened and have the threads extended.
So, how does it look? Close enough? Or should I keep watching for a 650c fork or donor bike. The paint on the Lotus frame is very chipped, Tange steel, but likely a hard-sell locally. So the Lotus will become parts either for this Moser, or some future project. I added a pic of the Lotus as a point of reference.
ps, if an admin wants to move this discussion from the valuation section to the C&V, feel free to do so since people have posted a lot of good history in this discussion (value questions can be edited out, not sure if I still have that option).
I’ve been watching for local postings of a road bike with a 650c front wheel and center mounted brakes. Found one with 650c front and rear, but way beyond my budget. Saw a Terry bike posted, but price and I think brakes were an issue. Then today I saw this Lotus, 700c rear with 24” front wheel (25-520, 600x25c marked on the tire). 2x6 Shimano 600 group. I sold some motorcycle parts after work, so I had the bike funds to buy this donor bike on the way home from work.
There are several inches of difference in the headtube lengths, so forgive the tape wrapped pipe insulation used as a spacer to help visually mock-up the fit. If it seems close to good then I can get the 24” fork steerer tube shortened and have the threads extended.
So, how does it look? Close enough? Or should I keep watching for a 650c fork or donor bike. The paint on the Lotus frame is very chipped, Tange steel, but likely a hard-sell locally. So the Lotus will become parts either for this Moser, or some future project. I added a pic of the Lotus as a point of reference.
ps, if an admin wants to move this discussion from the valuation section to the C&V, feel free to do so since people have posted a lot of good history in this discussion (value questions can be edited out, not sure if I still have that option).
The stance looks about right with the 24 on there
#44
Senior Member
Join Date: Mar 2014
Location: City of Angels
Posts: 5,052
Bikes: A few too many
Liked 2,501 Times
in
1,307 Posts
[QUOTE=treebound;22403907]Thanks, I’m trying to find a 1”-24 thread die before I cut the steerer tube down.[/QUOTE
The color even looks good...I would find local shop that has experience cutting and retreading that fork, the are hard to come by.
Ben
BTW, was that a Terry built frame, 700c on rear and 650b on the front would indicate it was...if so I never knew that they had one in the lotus line-up. The Lotus could also be a rare find.
Ben
i
The color even looks good...I would find local shop that has experience cutting and retreading that fork, the are hard to come by.
Ben
BTW, was that a Terry built frame, 700c on rear and 650b on the front would indicate it was...if so I never knew that they had one in the lotus line-up. The Lotus could also be a rare find.
Ben
i
__________________
"EVERY PERSON IS GUILTY OF ALL THE GOOD THEY DID NOT DO"
Voltaire
Voice recognition may sometimes create odd spelling and grammatical errors
"EVERY PERSON IS GUILTY OF ALL THE GOOD THEY DID NOT DO"
Voltaire
Voice recognition may sometimes create odd spelling and grammatical errors
Last edited by xiaoman1; 02-09-22 at 12:40 PM.
#45
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,889
Bikes: Old Steelies I made, Old Cannondales
Liked 1,013 Times
in
648 Posts
Closed at OP request.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html