Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

Tire Pressure

Old 06-06-22, 09:45 PM
  #1  
rclouviere
Newbie
Thread Starter
 
Join Date: Aug 2015
Location: Central California
Posts: 70

Bikes: Trek Madone

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 4 Times in 4 Posts
Tire Pressure

I know there are a lot of opinions on tire pressure, but I’d like to get some opinions. I want to be as fast as possible on my road bike (conti tubeless) and my TT bike (conti clincher). I’velooked at the silcachart and it seems to be pretty accurate?
rclouviere is offline  
Old 06-06-22, 09:50 PM
  #2  
cxwrench
Senior Member
 
cxwrench's Avatar
 
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767

Bikes: lots

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times in 1,489 Posts
You're kidding, right? This is the most beat down dead horse of a topic that has been discussed hundreds of times but you're going to crack into it yet again...but not provide any info about your or your equipment? Really?
cxwrench is offline  
Old 06-06-22, 10:10 PM
  #3  
LarrySellerz
Senior Member
 
Join Date: Mar 2021
Posts: 1,950
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 2630 Post(s)
Liked 470 Times in 340 Posts
Lots of people will tell you that wider tires at lower pressure are just as fast if not even faster than thin tires pumped up hard. Its bollocks, the fastest tires are narrow and pumped hard. The ideal PSI depends on your body weight and preferred riding style. Some people prefer less pressure to roll over imperfections in the road smoother, some people prefer the harsh ride of a rock hard tire, its really up to you.
LarrySellerz is offline  
Likes For LarrySellerz:
Old 06-06-22, 10:11 PM
  #4  
Outrider1
Full Member
 
Outrider1's Avatar
 
Join Date: Jun 2020
Location: Central Florida
Posts: 401

Bikes: Trek Emonda ALR 5

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 155 Post(s)
Liked 296 Times in 137 Posts
OP, what's your opinion on tire pressure? (you started it)
Outrider1 is offline  
Old 06-06-22, 10:12 PM
  #5  
beng1
Banned
 
Join Date: Feb 2014
Posts: 678
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 790 Post(s)
Liked 348 Times in 195 Posts
A lot of top racers us the Silca info so it will be as good as any info anyone puts up here or on any public forum. The only extra thing you could do is check with the manufacturers of your tires to see if for some reason they need different pressures than those of other manufacturers. Let us know what they say..........
beng1 is offline  
Likes For beng1:
Old 06-06-22, 10:14 PM
  #6  
easyupbug 
Senior Member
 
Join Date: Jan 2013
Posts: 2,648

Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 557 Post(s)
Liked 540 Times in 393 Posts
Get a Garmin or something similar and see what works for you.
easyupbug is offline  
Likes For easyupbug:
Old 06-07-22, 02:18 AM
  #7  
MTBbumpcrush
Newbie
 
MTBbumpcrush's Avatar
 
Join Date: May 2022
Location: Canada
Posts: 14

Bikes: Specialize Rockhopper 29

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 9 Times in 4 Posts
Smooth road surface high pressure is fast,rough road bigger tire with lower pressure,actual pressure level put your bodyweight into the scale,there is nothing to discuss about,also carbon spoke wheelset is the future road wheelset with instant response fast acceleration
https://www.elite-wheels.com/drive-c...okes-wheelset/

Last edited by MTBbumpcrush; 06-08-22 at 04:00 AM.
MTBbumpcrush is offline  
Likes For MTBbumpcrush:
Old 06-07-22, 04:10 AM
  #8  
PeteHski
Senior Member
 
PeteHski's Avatar
 
Join Date: May 2021
Posts: 8,020
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 4193 Post(s)
Liked 4,616 Times in 2,852 Posts
Originally Posted by rclouviere
I know there are a lot of opinions on tire pressure, but I’d like to get some opinions. I want to be as fast as possible on my road bike (conti tubeless) and my TT bike (conti clincher). I’velooked at the silcachart and it seems to be pretty accurate?
Use the Silca chart as your baseline then. There are too many variables to perfectly optimise your tyre pressure for every occasion anyway. Looking to maximise speed I would perhaps go a little higher than recommended pressures unless the road surface was rough. In which case I would go a little lower.
PeteHski is online now  
Likes For PeteHski:
Old 06-07-22, 06:13 AM
  #9  
smd4
Senior Member
 
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,535

Bikes: 1989 Cinelli Supercorsa

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3361 Post(s)
Liked 2,743 Times in 1,678 Posts
I run my Veloflex 700 x 23C's at 140 psi on smooth pavement. Works for me.
smd4 is offline  
Likes For smd4:
Old 06-07-22, 07:06 AM
  #10  
DaveSSS 
Senior Member
 
Join Date: Sep 2008
Location: Loveland, CO
Posts: 7,196

Bikes: Cinelli superstar disc, two Yoeleo R12

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1075 Post(s)
Liked 551 Times in 441 Posts
I use the tire pressure calculator at zipp.com. It works for me. Tubeless tires at much lower pressures is what I use.
DaveSSS is offline  
Likes For DaveSSS:
Old 06-07-22, 07:11 AM
  #11  
rumrunn6
Senior Member
 
rumrunn6's Avatar
 
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,501

Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0

Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5216 Post(s)
Liked 3,555 Times in 2,325 Posts
trial & error for the rear tire
5-10psi lower for the front tire

​​​​​​​I believe air resistance/drag & weight, will have a greater effect on your speed
rumrunn6 is offline  
Likes For rumrunn6:
Old 06-07-22, 07:29 AM
  #12  
CAT7RDR
Senior Member
 
Join Date: May 2017
Location: Hacienda Hgts
Posts: 2,075

Bikes: 1999 Schwinn Peloton Ultegra 10, Kestrel RT-1000 Ultegra, Trek Marlin 6 Deore 29'er

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 810 Post(s)
Liked 1,941 Times in 933 Posts
Experiment. Rinse, Repeat.
CAT7RDR is offline  
Old 06-07-22, 08:35 AM
  #13  
cxwrench
Senior Member
 
cxwrench's Avatar
 
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767

Bikes: lots

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times in 1,489 Posts
Originally Posted by LarrySellerz
Lots of people will tell you that wider tires at lower pressure are just as fast if not even faster than thin tires pumped up hard. Its bollocks, the fastest tires are narrow and pumped hard. The ideal PSI depends on your body weight and preferred riding style. Some people prefer less pressure to roll over imperfections in the road smoother, some people prefer the harsh ride of a rock hard tire, its really up to you.
Larry...just stop it. They're not the suggestions of physics, or the feels of physics, they're the LAWS of physics.
cxwrench is offline  
Likes For cxwrench:
Old 06-07-22, 08:42 AM
  #14  
Daniel4
Senior Member
 
Join Date: Jul 2013
Location: Toronto
Posts: 3,497

Bikes: Sekine 1979 ten speed racer

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1477 Post(s)
Liked 637 Times in 436 Posts
Low pressure has more rolling resistance because at the tangent point ( just before road contact), you are flexing the tire material to a higher angle than a tire at a very high pressure.
Daniel4 is offline  
Likes For Daniel4:
Old 06-07-22, 08:47 AM
  #15  
billridesbikes
Senior Member
 
Join Date: Nov 2019
Posts: 701
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 347 Post(s)
Liked 418 Times in 250 Posts
Here is an idea. Run your own experiment. Create a Strava segment on a longish downhill that will take at least a couple minutes to roll down without pedaling. Next start at low pressure and run down the segment a few times. Add pressure and repeat. Any RR difference will show up as an average time difference.

The reason I think that this is a divisive topic is that inflation pressure isn’t that important for speed. It’s down in the noise and difficult to measure a true diffence. Otherwise, if there was a large difference there would be universal consensus on what pressure to run.

Then run the pressure that feels the best to you and you don’t get pinch flats or blow the tire off the rim. There is no wrong pressure. (There, I said it)
billridesbikes is offline  
Likes For billridesbikes:
Old 06-07-22, 10:26 AM
  #16  
rsbob 
Grupetto Bob
 
rsbob's Avatar
 
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,023

Bikes: Bikey McBike Face

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2485 Post(s)
Liked 5,368 Times in 2,798 Posts
I have found this site tremendously helpful when it comes to pressures. Just feed in your data. https://silca.cc/pages/sppc-form
__________________
Road 🚴🏾‍♂️ & Mountain 🚵🏾‍♂️







rsbob is offline  
Old 06-07-22, 02:21 PM
  #17  
cxwrench
Senior Member
 
cxwrench's Avatar
 
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767

Bikes: lots

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times in 1,489 Posts
Originally Posted by Daniel4
Low pressure has more rolling resistance because at the tangent point ( just before road contact), you are flexing the tire material to a higher angle than a tire at a very high pressure.
You have no clue. Go join Larry somewhere else.
cxwrench is offline  
Old 06-07-22, 02:31 PM
  #18  
phughes
Senior Member
 
phughes's Avatar
 
Join Date: Mar 2011
Posts: 3,026
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1008 Post(s)
Liked 1,232 Times in 711 Posts
Originally Posted by LarrySellerz
Lots of people will tell you that wider tires at lower pressure are just as fast if not even faster than thin tires pumped up hard. Its bollocks, the fastest tires are narrow and pumped hard. The ideal PSI depends on your body weight and preferred riding style. Some people prefer less pressure to roll over imperfections in the road smoother, some people prefer the harsh ride of a rock hard tire, its really up to you.
Way more to it than that, Larry. https://www.renehersecycles.com/myth...ure-is-faster/

Don't you have a seat post to weld, remove, lower... break? Oh, and you honesty don't know what you are talking about.
phughes is offline  
Likes For phughes:
Old 06-07-22, 02:41 PM
  #19  
ofajen
Cheerfully low end
 
ofajen's Avatar
 
Join Date: Jun 2020
Posts: 1,959
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 641 Post(s)
Liked 1,034 Times in 659 Posts
Originally Posted by rclouviere
I know there are a lot of opinions on tire pressure, but I’d like to get some opinions. I want to be as fast as possible on my road bike (conti tubeless) and my TT bike (conti clincher). I’velooked at the silcachart and it seems to be pretty accurate?
Sorry, I’ll pass on the opinions but here’s the explanation of the Silca calculator along with a good discussion on the overall topic of rolling resistance of tire casings, the impedance of surfaces and how they interact.

https://silca.cc/blogs/silca/tire-pr...ator-explained

Otto
ofajen is offline  
Likes For ofajen:
Old 06-07-22, 04:59 PM
  #20  
rclouviere
Newbie
Thread Starter
 
Join Date: Aug 2015
Location: Central California
Posts: 70

Bikes: Trek Madone

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 4 Times in 4 Posts
Originally Posted by ofajen
Sorry, I’ll pass on the opinions but here’s the explanation of the Silca calculator along with a good discussion on the overall topic of rolling resistance of tire casings, the impedance of surfaces and how they interact.

https://silca.cc/blogs/silca/tire-pr...ator-explained

Otto
perfect. Thanks
rclouviere is offline  
Old 06-07-22, 05:06 PM
  #21  
rclouviere
Newbie
Thread Starter
 
Join Date: Aug 2015
Location: Central California
Posts: 70

Bikes: Trek Madone

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 4 Times in 4 Posts
Originally Posted by cxwrench
You're kidding, right? This is the most beat down dead horse of a topic that has been discussed hundreds of times but you're going to crack into it yet again...but not provide any info about your or your equipment? Really?
not on here much. Here goes: I’m 6’, 160+ pounds, have a madone and emonda set up tubeless with conti 5000 tires TLR and a TT bike, speed concept with conti 5000 clincher tires. All tires 25 mm

discussion came when another cyclist, known to be an annoying know it all, made the statement that anyone with tubeless tires who still inflated to 100 psi is an “idiot.” I said i was that idiot. He went in to say i should have wider tires (i have 25mm) and run them around 70psi. There were varying opinions.

bottom line is I’m 65 years old, but still trying to keep up with the youngsters, and need every speed advantage i can get.
rclouviere is offline  
Old 06-07-22, 05:09 PM
  #22  
rclouviere
Newbie
Thread Starter
 
Join Date: Aug 2015
Location: Central California
Posts: 70

Bikes: Trek Madone

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 4 Times in 4 Posts
Originally Posted by Outrider1
OP, what's your opinion on tire pressure? (you started it)
I’ve always run at least 110psi. “Feels” faster to and how it’s always been for me. Lower psi just seems slower. I know there’s been lots of testing on this, but I’m just not sure now. The silica chart indicates i should be around 95psi
rclouviere is offline  
Likes For rclouviere:
Old 06-07-22, 05:10 PM
  #23  
WhyFi
Senior Member
 
WhyFi's Avatar
 
Join Date: Jan 2010
Location: TC, MN
Posts: 39,505

Bikes: R3 Disc, Haanjo

Mentioned: 353 Post(s)
Tagged: 1 Thread(s)
Quoted: 20791 Post(s)
Liked 9,435 Times in 4,663 Posts
Originally Posted by smd4
I run my Veloflex 700 x 23C's at 140 psi on smooth pavement. Works for me.
Ew, David.
WhyFi is offline  
Likes For WhyFi:
Old 06-07-22, 05:11 PM
  #24  
rclouviere
Newbie
Thread Starter
 
Join Date: Aug 2015
Location: Central California
Posts: 70

Bikes: Trek Madone

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 4 Times in 4 Posts
Originally Posted by LarrySellerz
Lots of people will tell you that wider tires at lower pressure are just as fast if not even faster than thin tires pumped up hard. Its bollocks, the fastest tires are narrow and pumped hard. The ideal PSI depends on your body weight and preferred riding style. Some people prefer less pressure to roll over imperfections in the road smoother, some people prefer the harsh ride of a rock hard tire, its really up to you.
I don’t care about comfort, only going faster.
rclouviere is offline  
Old 06-07-22, 05:11 PM
  #25  
WhyFi
Senior Member
 
WhyFi's Avatar
 
Join Date: Jan 2010
Location: TC, MN
Posts: 39,505

Bikes: R3 Disc, Haanjo

Mentioned: 353 Post(s)
Tagged: 1 Thread(s)
Quoted: 20791 Post(s)
Liked 9,435 Times in 4,663 Posts
Originally Posted by rclouviere
I don’t care about comfort, only going faster.
Smooth is fast. Fast is smooth.
WhyFi is offline  
Likes For WhyFi:

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.