Go Back  Bike Forums > Bike Forums > General Cycling Discussion
Reload this Page >

Well I’ve gone and done it, New Look Frame

Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

Well I’ve gone and done it, New Look Frame

Old 01-07-23, 03:11 PM
  #1  
Shadco 
Resident PIA
Thread Starter
 
Shadco's Avatar
 
Join Date: Jul 2004
Location: City of Oaks, NC
Posts: 842

Bikes: Gunnar Roadie, Look 765 Optimum, Spesh Aethos

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 206 Post(s)
Liked 347 Times in 183 Posts
Well I’ve gone and done it, New Look Frame

After fretting about my options for a few months I have decided on an Endurance type of ride to augment my Gunnar Roadie.

My order is in for a Look 765 Optimum in medium Satin Black.



I have a Campy Record 12 speed compact crankset. I’m hoping Campy starts shipping their T47-86 ultra torque cups to the US real soon so I don’t have to go the bbinfinite route.

The rest of the groupset will be Campy Chorus 12 mechanical/hydraulic disc. Will go Keo pedals. Tires will be 30c.

For wheels I’m thinking Campy Shamal carbon but need to decide if I want to go cup and cone.

The rest of the fit kit is up in the air.

What to do for seat post, 350mm 27.2 25mm set back.

Bars and Stem ??? Deda?

Suggestions would be appreciated.

Frame should arrive late next week.

Better pic




,
__________________
--
Shad
I knew where I was when I wrote this
I don't know where I am now...
05 Gunnar Roadie Chorus/Record
67'er

Last edited by Shadco; 01-07-23 at 03:54 PM.
Shadco is offline  
Likes For Shadco:
Old 01-07-23, 05:04 PM
  #2  
TiHabanero
Senior Member
 
Join Date: Nov 2012
Posts: 4,435
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1726 Post(s)
Liked 1,350 Times in 705 Posts
Nice looking frameset. Superb choice for drive train. No opinion on the rest of the parts, whatever stem and hbar that works best for you, not the one that looks best. I have some really nice carbon bars sitting on a shelf because my body does not like them. Seat post is a seat post, just be sure it has the setback you need.
TiHabanero is offline  
Old 01-08-23, 08:15 PM
  #3  
Oldguyonoldbike
Senior Member
 
Oldguyonoldbike's Avatar
 
Join Date: Sep 2014
Location: Norman, OK
Posts: 839

Bikes: Casati Laser, Colnago Tecnos, Ciöcc Exige, Black Mountain Cycles Road

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 129 Post(s)
Liked 177 Times in 78 Posts
I’ve had my eye on that frame. I’m curious to hear your impressions once you’ve got it built.

FWIW I’ve always been happy with Deda components, but you should go with what fits you best.
Oldguyonoldbike is offline  
Old 01-09-23, 03:39 PM
  #4  
Sy Reene
Advocatus Diaboli
 
Sy Reene's Avatar
 
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,612

Bikes: Merlin Cyrene, Nashbar steel CX

Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4717 Post(s)
Liked 1,526 Times in 997 Posts
Interesting bike. I took a look at its Geo though, it has a 70.3 degree HT angle with 73 degree ST angle. What if anything does this imply about its handling characteristics? Most bikes have those 2 angles closer together.
Sy Reene is offline  
Old 01-09-23, 03:44 PM
  #5  
79pmooney
Senior Member
 
79pmooney's Avatar
 
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,830

Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder

Mentioned: 128 Post(s)
Tagged: 0 Thread(s)
Quoted: 4745 Post(s)
Liked 3,861 Times in 2,510 Posts
I saw the title and the :New Look Frame". All my bikes are old look! (And not made by Look. In fact, only one frame is even French.

That said, good looking bike!
79pmooney is offline  
Old 01-09-23, 11:58 PM
  #6  
Fredo76
The Wheezing Geezer
 
Fredo76's Avatar
 
Join Date: Oct 2021
Location: Española, NM
Posts: 995

Bikes: 1976 Fredo Speciale, Jamis Citizen 1, Ellis-Briggs FAVORI, Rivendell Clem Smith Jr.

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 394 Post(s)
Liked 856 Times in 422 Posts
Originally Posted by Sy Reene
Interesting bike. I took a look at its Geo though, it has a 70.3 degree HT angle with 73 degree ST angle. What if anything does this imply about its handling characteristics? Most bikes have those 2 angles closer together.
More stability in the steering; less twitchy. Might even allow for no toe overlap!
Fredo76 is offline  
Likes For Fredo76:
Old 01-10-23, 06:20 AM
  #7  
PeteHski
Senior Member
 
PeteHski's Avatar
 
Join Date: May 2021
Posts: 8,175
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 4274 Post(s)
Liked 4,712 Times in 2,911 Posts
Originally Posted by Sy Reene
Interesting bike. I took a look at its Geo though, it has a 70.3 degree HT angle with 73 degree ST angle. What if anything does this imply about its handling characteristics? Most bikes have those 2 angles closer together.
Yes definitely a very interesting frame. I think this kind of "slacker" geometry (gravel bike inspired) will eventually become the norm for endurance road bikes, with more stable, less twitchy handling. Only full-on race bikes really benefit from super-quick handling and yet pretty much all performance road bikes still have "race" geometry. Gravel bikes have moved on from standard road geometry and now we are seeing frames like this that cover both gravel and endurance road applications in equal measure. If people are being honest with themselves, this is the kind of bike that would probably serve 90%+ of performance road riders better than a typical road race geometry.
PeteHski is offline  
Likes For PeteHski:
Old 01-10-23, 07:51 AM
  #8  
Shadco 
Resident PIA
Thread Starter
 
Shadco's Avatar
 
Join Date: Jul 2004
Location: City of Oaks, NC
Posts: 842

Bikes: Gunnar Roadie, Look 765 Optimum, Spesh Aethos

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 206 Post(s)
Liked 347 Times in 183 Posts
Originally Posted by Sy Reene
Interesting bike. I took a look at its Geo though, it has a 70.3 degree HT angle with 73 degree ST angle. What if anything does this imply about its handling characteristics? Most bikes have those 2 angles closer together.
I have a Gunnar Roadie, lovely bike, light pretty much the other direction geometry wise though. At 70 pushing 71 before this one will be built out I find the Gunnar not relaxing to ride, it’s fun it’s quick but I need to focus all the time which takes some of the joy out of longer rides. I work at a bike shop but couldn’t find a frame that gave me what I wanted that didn’t come as a complete bike. I considered a Defy with 105 where I could pull the groupset and sell it but that didn’t really appeal to me. This was announced it was available in my size the frame price was reasonable so I pulled the trigger.

The only challenge I foresee so far is that I may have to use a bbinfinite bottom bracket since it appears Campy is slow to get their T47 86 Ultra Torque cups to the states.

.
__________________
--
Shad
I knew where I was when I wrote this
I don't know where I am now...
05 Gunnar Roadie Chorus/Record
67'er
Shadco is offline  
Old 01-10-23, 05:54 PM
  #9  
Shadco 
Resident PIA
Thread Starter
 
Shadco's Avatar
 
Join Date: Jul 2004
Location: City of Oaks, NC
Posts: 842

Bikes: Gunnar Roadie, Look 765 Optimum, Spesh Aethos

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 206 Post(s)
Liked 347 Times in 183 Posts
Today was a great day frame came in unscathed and I found what may be the only Enduro T47/86 Ultra Torque bottom bracket around.

Now only need seat post, stem and saddle.




.
__________________
--
Shad
I knew where I was when I wrote this
I don't know where I am now...
05 Gunnar Roadie Chorus/Record
67'er
Shadco is offline  
Likes For Shadco:
Old 01-10-23, 08:23 PM
  #10  
jaxgtr
Senior Member
 
jaxgtr's Avatar
 
Join Date: Jul 2006
Location: Jacksonville, FL
Posts: 6,830

Bikes: Trek Domane SLR 7 AXS, Trek CheckPoint SL7, Trek Emonda ALR, Trek FX 5 Sport

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 751 Post(s)
Liked 1,666 Times in 980 Posts
I've always like the FSA stems, bars, and seatpost. Have them on my Emonda, very comfy bars.
__________________
Brian | 2023 Trek Domane SLR 7 AXS | 2023 Trek CheckPoint SL 7 AXS | 2016 Trek Emonda ALR | 2022 Trek FX Sport 5
Originally Posted by AEO
you should learn to embrace change, and mock it's failings every step of the way.



jaxgtr is offline  
Old 01-11-23, 05:32 AM
  #11  
PeteHski
Senior Member
 
PeteHski's Avatar
 
Join Date: May 2021
Posts: 8,175
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 4274 Post(s)
Liked 4,712 Times in 2,911 Posts
Why not get the matching LOOK seatpost, bars and stem?
PeteHski is offline  
Old 01-11-23, 06:01 AM
  #12  
Shadco 
Resident PIA
Thread Starter
 
Shadco's Avatar
 
Join Date: Jul 2004
Location: City of Oaks, NC
Posts: 842

Bikes: Gunnar Roadie, Look 765 Optimum, Spesh Aethos

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 206 Post(s)
Liked 347 Times in 183 Posts
Originally Posted by PeteHski
Why not get the matching LOOK seatpost, bars and stem?
Stem isn’t available, didn’t like the bars got a nos Easton E100, a carbon seat post is a carbon seatpost probably going to get an Easton once I see the fitter.

.
__________________
--
Shad
I knew where I was when I wrote this
I don't know where I am now...
05 Gunnar Roadie Chorus/Record
67'er
Shadco is offline  
Old 01-11-23, 06:08 AM
  #13  
PeteHski
Senior Member
 
PeteHski's Avatar
 
Join Date: May 2021
Posts: 8,175
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 4274 Post(s)
Liked 4,712 Times in 2,911 Posts
Originally Posted by Shadco
Stem isn’t available, didn’t like the bars got a nos Easton E100, a carbon seat post is a carbon seatpost probably going to get an Easton once I see the fitter.

.
Fair enough. But I wouldn't go thinking all carbon seatposts are going to feel the same. Some are designed with considerably more flexibility than others, which can really affect comfort. Some have much better seat clamps than others too. But I have no idea where Easton sit in either of these respects. Just something to consider when choosing.
PeteHski is offline  
Likes For PeteHski:
Old 01-11-23, 08:29 AM
  #14  
DaveSSS 
Senior Member
 
Join Date: Sep 2008
Location: Loveland, CO
Posts: 7,213

Bikes: Cinelli superstar disc, two Yoeleo R12

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1090 Post(s)
Liked 554 Times in 443 Posts
Here's a link to the geometry. It's not what others have posted. The steering trail is 67mm for all sizes. That should work just fine. Since this is an endurance model, the stack is 20-30mm taller than a racing oriented frame and the reach is a little shorter - both intended to produce a more upright fit.

https://www.lookcycle.com/us-en/prod...llic-satin-105

I've owned four LOOK frames over the years. No problems with any of them. My favorite seatpost is the FSA K-force. Great clamp for easy angle adjustment. Favorite bars are Easton EC-90 or EC-70. I've used a lot of Zipp stems.

I'll be most curious to know how well the shifting works with internally routed shift cables. It should require some fairly long runs of cable housing.

Last edited by DaveSSS; 01-11-23 at 08:56 AM.
DaveSSS is offline  
Old 01-12-23, 09:47 AM
  #15  
tomato coupe
Senior Member
 
Join Date: Jul 2009
Posts: 5,879

Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3906 Post(s)
Liked 7,181 Times in 2,905 Posts
Originally Posted by DaveSSS
Here's a link to the geometry. It's not what others have posted.
Ummmmmm ... the only aspect of the geometry that has been discussed is the (relatively) large difference in head tube angle and seat tube angle, and what has been posted by others is correct.
tomato coupe is offline  
Old 01-12-23, 05:11 PM
  #16  
DaveSSS 
Senior Member
 
Join Date: Sep 2008
Location: Loveland, CO
Posts: 7,213

Bikes: Cinelli superstar disc, two Yoeleo R12

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1090 Post(s)
Liked 554 Times in 443 Posts
Originally Posted by tomato coupe
Ummmmmm ... the only aspect of the geometry that has been discussed is the (relatively) large difference in head tube angle and seat tube angle, and what has been posted by others is correct.
Others posted 70.3 hta and 73 sta. Neither agree with this link, which lists 70.8 hta and 74 sta. The two dimensions have nothing to do with each other, so I don't get the point. Hopefully all interested can read the geometry chart.

​​​​
https://www.lookcycle.com/us-en/prod...llic-satin-105
DaveSSS is offline  
Old 01-12-23, 05:19 PM
  #17  
tomato coupe
Senior Member
 
Join Date: Jul 2009
Posts: 5,879

Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3906 Post(s)
Liked 7,181 Times in 2,905 Posts
Originally Posted by DaveSSS
Others posted 70.3 hta and 73 sta. Neither agree with this link, which lists 70.8 hta and 74 sta. The two dimensions have nothing to do with each other, so I don't get the point. Hopefully all interested can read the geometry chart.
The salient issue was the notable difference between the two angles, and the implications of that difference. That's the point.
tomato coupe is offline  
Old 01-13-23, 05:19 AM
  #18  
PeteHski
Senior Member
 
PeteHski's Avatar
 
Join Date: May 2021
Posts: 8,175
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 4274 Post(s)
Liked 4,712 Times in 2,911 Posts
Originally Posted by tomato coupe
The salient issue was the notable difference between the two angles, and the implications of that difference. That's the point.
Exactly. From Geometry Geeks it looks like the angles were listed slightly differently in 2022. But the head angle is still about 3 deg slacker than a typical road bike. They sell the same frame in a gravel build too. I think it makes perfect sense for an endurance road bike like this.
PeteHski is offline  
Old 01-13-23, 08:15 AM
  #19  
DaveSSS 
Senior Member
 
Join Date: Sep 2008
Location: Loveland, CO
Posts: 7,213

Bikes: Cinelli superstar disc, two Yoeleo R12

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1090 Post(s)
Liked 554 Times in 443 Posts
I've followed bike geometry for over 30 years and have a binder full of old geometry charts. If you're familiar with the formula for calculating steering trail, you know that a given trail value can be achieved with different combinations of HTA and fork offset. It's common for larger frames to have steeper HTAs to avoid an overly long wheelbase and more slack on smaller frames to avoid excessive toe overlap and a too short wheelbase. Italians tend to use more trail than other builders. I like the larger trail that Colnago used for many years and I've owned four. Some brands offer frames with a small 58mm trail for all sizes. It's not right or wrong, but not what I want in a small frame.

My other point was that STA and HTA have no particular correlation, but smaller frames generally have steeper STAs and more slack HTAs, so it's common to have a HTA in the 71-72 range and a STA in the 74-75 range, so you shouldn't expect to see parallel angles. LOOK used to make frames with a 72.5 degree STA in all sizes.

Stack and reach now make getting the right frame size easier. If you know the stack that you want, find that first, then compare reach. The STA only affects your choice of seatpost setback. Right now, my Cinelli superstar has the saddle centered on a 25mm setback post, with a 74.5 degree STA. Some frames have proprietary posts and only one setback offering. My Yoeleo frames have a unique post that offers a wide range of setback at the seat rail clamp, with the maximum around 25mm. There are times when I have used 32mm setback seat posts.

Last edited by DaveSSS; 01-13-23 at 08:29 AM.
DaveSSS is offline  
Likes For DaveSSS:
Old 01-13-23, 01:21 PM
  #20  
tomato coupe
Senior Member
 
Join Date: Jul 2009
Posts: 5,879

Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3906 Post(s)
Liked 7,181 Times in 2,905 Posts
Originally Posted by DaveSSS
I've followed bike geometry for over 30 years ...
Doesn't really address the issue of how the difference in seat tube and head tubes angles might affect the OP's new frame.
tomato coupe is offline  
Old 01-13-23, 01:58 PM
  #21  
Shadco 
Resident PIA
Thread Starter
 
Shadco's Avatar
 
Join Date: Jul 2004
Location: City of Oaks, NC
Posts: 842

Bikes: Gunnar Roadie, Look 765 Optimum, Spesh Aethos

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 206 Post(s)
Liked 347 Times in 183 Posts
Slowly mocking it up. I need the Look LS3 stem which ties into the Token junction spacer and and spacer stack to lock it all together. Hopefully next week.

Enduro bottom bracket should be here Tuesday, already have the record compact crank.

Majority of the Record group should be here next week too QBP has the rd on a watch list.

Edit JBI had all the Campy stuff so went there instead.

Look Keo Max 2 carbons for pedals.

Probably going Roval 38’s for wheels gotta scrimp somewhere. Anyone want a deal on a Shimano free hub?

Ended up going Shamal C21s, decided not to scrimp.

Look Carbon Seat Post, Selle San Marco Shortfit Open Dynamic saddle

Then it’s off to the fitter.





.
__________________
--
Shad
I knew where I was when I wrote this
I don't know where I am now...
05 Gunnar Roadie Chorus/Record
67'er

Last edited by Shadco; 01-15-23 at 10:28 AM.
Shadco is offline  
Old 01-13-23, 02:01 PM
  #22  
Shadco 
Resident PIA
Thread Starter
 
Shadco's Avatar
 
Join Date: Jul 2004
Location: City of Oaks, NC
Posts: 842

Bikes: Gunnar Roadie, Look 765 Optimum, Spesh Aethos

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 206 Post(s)
Liked 347 Times in 183 Posts
Originally Posted by PeteHski
Exactly. From Geometry Geeks it looks like the angles were listed slightly differently in 2022. But the head angle is still about 3 deg slacker than a typical road bike. They sell the same frame in a gravel build too. I think it makes perfect sense for an endurance road bike like this.
Gravel version is different

.
__________________
--
Shad
I knew where I was when I wrote this
I don't know where I am now...
05 Gunnar Roadie Chorus/Record
67'er
Shadco is offline  
Old 01-13-23, 02:30 PM
  #23  
tomato coupe
Senior Member
 
Join Date: Jul 2009
Posts: 5,879

Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3906 Post(s)
Liked 7,181 Times in 2,905 Posts
Originally Posted by Shadco
Slowly mocking it up.
They spelled Kool wrong. I think you got a counterfeit.
tomato coupe is offline  
Likes For tomato coupe:
Old 01-13-23, 02:34 PM
  #24  
Shadco 
Resident PIA
Thread Starter
 
Shadco's Avatar
 
Join Date: Jul 2004
Location: City of Oaks, NC
Posts: 842

Bikes: Gunnar Roadie, Look 765 Optimum, Spesh Aethos

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 206 Post(s)
Liked 347 Times in 183 Posts
Originally Posted by tomato coupe
They spelled Kool wrong. I think you got a counterfeit.
Better?




.
__________________
--
Shad
I knew where I was when I wrote this
I don't know where I am now...
05 Gunnar Roadie Chorus/Record
67'er
Shadco is offline  
Likes For Shadco:
Old 01-13-23, 04:43 PM
  #25  
DaveSSS 
Senior Member
 
Join Date: Sep 2008
Location: Loveland, CO
Posts: 7,213

Bikes: Cinelli superstar disc, two Yoeleo R12

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1090 Post(s)
Liked 554 Times in 443 Posts
Originally Posted by tomato coupe
Doesn't really address the issue of how the difference in seat tube and head tubes angles might affect the OP's new frame.
Not a brilliant answer. The OP didn't ask anything to be explained.

​​​​The difference between those two angles is meaningless, since the STA determines what might be the best seatpost setback to buy and HTA has no significant effect on the fit. It has a 67mm trail and will handle accordingly. Anyone who thinks there should be a correlation between HTA and STA is mistaken.
DaveSSS is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.