Santana Disc 4 upgrade install advice
#1
Newbie
Thread Starter
Join Date: Apr 2007
Posts: 5
Likes: 0
Liked 0 Times
in
0 Posts
Santana Disc 4 upgrade install advice
I purchased a Santana Disc 4 upgrade kit (10" disc) for my 2007 Team Niobium with Ultegra 10speed and Shimano Sweet 16 wheels. Kit arrived today and looks like it has all the parts I need.
Looking for any lessons learned or advice from others on install issues.
The one items that makes me a little nervous is the need to rivet a cable stay boss to the rear lower stay. The kit comes with a photo of the install location.
Looking for any lessons learned or advice from others on install issues.
The one items that makes me a little nervous is the need to rivet a cable stay boss to the rear lower stay. The kit comes with a photo of the install location.
#2
Newbie
Usually the simple and easy solution is to just place a piece of brake housing between the cable bridge below the stoker bottom bracket and the caliper. It then acts as a cable guide between those two points and should not go anywhere.