Screws, bolts etc?
#1
Junior Member
Thread Starter
Screws, bolts etc?
I'm relatively new to bike mechanics and have been trying to learn / do all of the work on my bike (minus truing, not gonna buy a truing stand). I have a couple of semi-rounded screws on my rim brake clipers (specifically the ones used to adjust pad distance). Wondering if there are semi-universal bolt / screw sizings where I could just buy an assorted kit of bolts / screws for my bike to have on hand. Obviously I could just pop the screw out and pop over to home depot but figured I might start here.
#2
Senior Member
Most of the stuff at Home Depot is home oriented. They really do not have a lot of even automotive hardware, and even less bike hardware. I kid you not. I would try asking your local bike shop.
Likes For ScottCommutes:
#3
Full Member
Join Date: Jul 2023
Location: Montréal
Posts: 333
Bikes: Hardrock touring bike
Liked 139 Times
in
89 Posts
And while you're at it, you might want to replace the Phillips head screws with stainless steel hex socket head cap screws which are turned with your Allen keys and won't strip out.
Someone here mentioned this recently and I just replaced my derailleur adjustment screws (4mm and I believe the brakes adjusters are also 4mm).
You can buy huge assortments of stainless steel metric fasteners on amazon for cheap. Probably not the highest quality, but sufficient for a bike.
Someone here mentioned this recently and I just replaced my derailleur adjustment screws (4mm and I believe the brakes adjusters are also 4mm).
You can buy huge assortments of stainless steel metric fasteners on amazon for cheap. Probably not the highest quality, but sufficient for a bike.
Likes For Paul_P:
#4
Senior Member
Join Date: Mar 2024
Location: San Diego
Posts: 1,228
Bikes: Columbine, Paramount Track Bike, Colnago Super, Santana Tandems (1995 & 2007), Gary Fisher Piranha, Trek Wahoo, Bianchi Track Bike, a couple of Honda mountain bikes
Liked 440 Times
in
271 Posts
McMaster-Carr has an incredible selection of nuts, bolts and everything under the sun. They also list very detailed specifications about their products (strengths, tolerances, etc). Great site. One could get lost there. Here in San Diego shipping is next morning. Not sure about Denver.
BelMetric has a great selection of metric fasteners.
Both sell very high quality items.
BelMetric has a great selection of metric fasteners.
Both sell very high quality items.
__________________
Cheers, Mike
-Stupid hurts....ride safe
Cheers, Mike
-Stupid hurts....ride safe
Likes For PromptCritical:
#5
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 39,657
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Liked 3,491 Times
in
1,916 Posts
The bike world mostly uses 2 threads on brakes. M6x1 on mounting bolts and brake shoes. And M5x.8 for cable pinch bolts.
The M5 is also common elsewhere; on derailleurs, fender eyes, etc.
BITD, we used to sell kits like you're seeking, but I don't know if anything similar is still available.
OTOH, there aren't that many nuts and screws used on bikes, so you can make a single buy and cover all the bases without spending much
The M5 is also common elsewhere; on derailleurs, fender eyes, etc.
BITD, we used to sell kits like you're seeking, but I don't know if anything similar is still available.
OTOH, there aren't that many nuts and screws used on bikes, so you can make a single buy and cover all the bases without spending much
Likes For FBinNY:
#6
Senior Member
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 7,340
Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo
Liked 2,417 Times
in
1,363 Posts
I have luck finding metric 3-4-5-&6 mm stainless hex head screws at my local Ace hardware.
Likes For Steve B.:
#7
Senior Member
Join Date: Jul 2023
Location: "Driftless" WI
Posts: 523
Bikes: 1972 Motobecane Grand Record, 2023 Specialized Tarmac SL7, 2022 Kona Dew+
Liked 253 Times
in
151 Posts
I use McMaster for stuff I can't get from the Hillman array at my local Ace when necessary but the UPS shipping $$ has to be factored into the equation. If I need one or five items, local is vastly cheaper. If it's 20+ the nod goes to McMaster or another vendor.
Likes For spclark:
#8
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,771
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Liked 1,850 Times
in
1,186 Posts
My only bike using OEM pads is my Wall Hanger. All the rest have modified and adapted generic "Kool Stop" style brake pads.
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
Last edited by zandoval; 05-17-24 at 07:30 PM.
Likes For zandoval:
#9
Junior Member
Thread Starter
Thanks for all the great information. We've got a massive ACE in the area so I'll check them out and check out Mcmaster if I ever want to pickup a bunch of stuff.
Paul_P Great suggestion, for some reason I didn't even think about this I think my brain just automatically assumed if this was an option they would've used them to begin with, completely ignoring the tiny Allen keys in my set lmao
EDIT: Does make me wonder though if higher-end bikes come stock with better quality fasteners. Roll is a great bike for what it is but it's definitely an entry level and I'm sure they tend to skimp on that stuff the lower in budget you go.
Paul_P Great suggestion, for some reason I didn't even think about this I think my brain just automatically assumed if this was an option they would've used them to begin with, completely ignoring the tiny Allen keys in my set lmao
EDIT: Does make me wonder though if higher-end bikes come stock with better quality fasteners. Roll is a great bike for what it is but it's definitely an entry level and I'm sure they tend to skimp on that stuff the lower in budget you go.
Last edited by TheBlackPumpkin; 05-17-24 at 07:31 PM. Reason: Thoughts
#10
Junior Member
Thread Starter
Do note that adjusting and replacing brake pads can be tedious. Take your time. You will note that there are rounded and flat washers, long bolts, and caps that can be rearranged to provide you the best angle and toe of braking power.
My only bike using OEM pads is my Wall Hanger. All the rest have modified and adapted generic "Kool Stop" style brake pads.
My only bike using OEM pads is my Wall Hanger. All the rest have modified and adapted generic "Kool Stop" style brake pads.
Yeah I massively rounded one off when I swapped from stock rims to velocity Dyads and didn't know what I was doing with brake adjusting (tried to just figure it out on my own) and through fatigue and frustration, rounded that sucker. On the bright side I learned a lot of what NOT to do lol
Last edited by TheBlackPumpkin; 05-17-24 at 07:45 PM. Reason: Spelling
Likes For TheBlackPumpkin:
#11
Full Member
Join Date: Jul 2023
Location: Montréal
Posts: 333
Bikes: Hardrock touring bike
Liked 139 Times
in
89 Posts
Just an example :
VIGRUE 304 Stainless Steel Screws and Nuts, M3 M4 M5 M6 Hex Socket Head Cap Screws Assortment Set Kit with Storage Box (520 Pcs Hex Socket Head Cap Screws Nuts)
Then some washers and nyloc nuts.
More than you'll ever need...
VIGRUE 304 Stainless Steel Screws and Nuts, M3 M4 M5 M6 Hex Socket Head Cap Screws Assortment Set Kit with Storage Box (520 Pcs Hex Socket Head Cap Screws Nuts)
Then some washers and nyloc nuts.
More than you'll ever need...
Likes For Paul_P:
#12
Junior Member
Thread Starter
Just an example :
VIGRUE 304 Stainless Steel Screws and Nuts, M3 M4 M5 M6 Hex Socket Head Cap Screws Assortment Set Kit with Storage Box (520 Pcs Hex Socket Head Cap Screws Nuts)
Then some washers and nyloc nuts.
More than you'll ever need...
VIGRUE 304 Stainless Steel Screws and Nuts, M3 M4 M5 M6 Hex Socket Head Cap Screws Assortment Set Kit with Storage Box (520 Pcs Hex Socket Head Cap Screws Nuts)
Then some washers and nyloc nuts.
More than you'll ever need...
#13
Senior Member
Join Date: Jul 2005
Location: Boulder County, CO
Posts: 4,576
Bikes: '80 Masi Gran Criterium, '12 Trek Madone, early '60s Frejus track
Liked 514 Times
in
389 Posts
Bicycles don't customarily throw off nuts and bolts, and trying to anticipate what you're likely to break or lose is nearly impossible. Keep your spares, remember your local bike shop has spares, too, and they can order the special-purpose stuff that you'd never find in a hardware store.
#14
Droid on a mission
Join Date: May 2018
Location: Palm Coast, FL
Posts: 1,072
Bikes: Diamondback Wildwood Classic
Liked 317 Times
in
221 Posts
But I find them the most expensive, only use them when in a pinch
__________________
JoeTBM (The Bike Man) - I'm a black & white type of guy, the only gray in my life is the hair on my head
www.TheBikeMenOfFlaglerCounty.com
JoeTBM (The Bike Man) - I'm a black & white type of guy, the only gray in my life is the hair on my head
www.TheBikeMenOfFlaglerCounty.com
#15
Be aware that metric fasteners come in multiple pitches, sellers may not state which one - M5 could be M5x0.8 or M5x0.5, M6 could be M6x1.0 or M6x0.75 - the bicycle versions are the more common coarse threads in those cases. But there is potential for confusion: M10x1.0 for derailleur hangers and rear axles, where the coarse pitch is 1.5 and 1.0 is the middle of three fine pitches (0.75 and 1.25 being the others).
Likes For grumpus:
#16
Senior Member
Don’t forget about AliExpress amazing selection at fantastic prices. Perfect for stocking up hardware.
#17
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,821
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Liked 3,661 Times
in
2,205 Posts
I'm relatively new to bike mechanics and have been trying to learn / do all of the work on my bike (minus truing, not gonna buy a truing stand). I have a couple of semi-rounded screws on my rim brake clipers (specifically the ones used to adjust pad distance). Wondering if there are semi-universal bolt / screw sizings where I could just buy an assorted kit of bolts / screws for my bike to have on hand. Obviously I could just pop the screw out and pop over to home depot but figured I might start here.
#18
Senior Member
Join Date: Jul 2023
Location: "Driftless" WI
Posts: 523
Bikes: 1972 Motobecane Grand Record, 2023 Specialized Tarmac SL7, 2022 Kona Dew+
Liked 253 Times
in
151 Posts
S"truth that!
Typically there can be more than one or two thread pitches for common metric fastener diameters.
This chart includes some of the 'in-between' sizes less commonly encountered, with their associated thread pitch specs as well as an approximation of Threads Per Inch that might be useful for some applications.
Typically there can be more than one or two thread pitches for common metric fastener diameters.
This chart includes some of the 'in-between' sizes less commonly encountered, with their associated thread pitch specs as well as an approximation of Threads Per Inch that might be useful for some applications.
Last edited by spclark; 05-22-24 at 05:13 AM.