More creaking and groaning
#1
...
Thread Starter
Join Date: Oct 2021
Location: Whitestone and Rensselaerville, New York
Posts: 1,502
Bikes: Bicycles? Yup.
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 478 Post(s)
Liked 1,573 Times
in
731 Posts
More creaking and groaning
My modern Canyon developed a loud creak after a tremendous pothole bunny hop. After working on the BB, chainring bolts and everything else I could think of, I got with Canyon and their creaking document.
It was the RD hangar-to-frame that was creaking.
Here's their document on creaking fixes.
https://www.canyon.com/en-us/support-articles/fixing_cracking_sounds_and_noises.html
Worked for me.
It was the RD hangar-to-frame that was creaking.
Here's their document on creaking fixes.
https://www.canyon.com/en-us/support-articles/fixing_cracking_sounds_and_noises.html
Worked for me.
Last edited by BTinNYC; 06-02-23 at 05:30 AM.
Likes For BTinNYC:
#2
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,522
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3660 Post(s)
Liked 5,405 Times
in
2,745 Posts
The creak on my new bike turned out to be from a dry as a bone seatpost. Derailleur hanger would have been far down my list to check. Interesting they didn't mention bottom bracket.
#3
Senior Member
Join Date: Mar 2012
Posts: 980
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 506 Post(s)
Likes: 0
Liked 638 Times
in
356 Posts
My modern Canyon developed a loud creak after a tremendous pothole bunny hop. After working on the BB, chainring bolts and everything else I could think of, I got with Canyon and their creaking document.
It was the RD hangar-to-frame that was creaking.
Here's their document on creaking fixes.
https://www.canyon.com/en-us/support...nd_noises.html
Worked for me.
It was the RD hangar-to-frame that was creaking.
Here's their document on creaking fixes.
https://www.canyon.com/en-us/support...nd_noises.html
Worked for me.
Likes For KerryIrons:
#5
Mechanic/Tourist
That's somewhat helpful but it's not at all a comprehensive list, and indicates a shotgun approach - try all of these things just in case. The first step in solving a problem is narrowing down the possible causes. Without that it's just a guessing game. In the case of creaking, cracking, clicks, etc. this is the list I go through:
1. Does it occur in time with pedal or wheel rotation, or neither (including not pedaling)?
2. Does the timing change at all in different gears?
3. Does it require higher pedal pressure to create it?
4. Does it change with a change in position to put more pressure on front vs. rear wheels, or if you pedal out of the saddle?
5. Did it occur after any change in equipment, maintenance procedure, an accident, or extreme weather?
Once those questions are answered it's much easier to eliminate some causes and focus on the most likely cause and solution.
1. Does it occur in time with pedal or wheel rotation, or neither (including not pedaling)?
2. Does the timing change at all in different gears?
3. Does it require higher pedal pressure to create it?
4. Does it change with a change in position to put more pressure on front vs. rear wheels, or if you pedal out of the saddle?
5. Did it occur after any change in equipment, maintenance procedure, an accident, or extreme weather?
Once those questions are answered it's much easier to eliminate some causes and focus on the most likely cause and solution.