Go Back  Bike Forums > Bike Forums > Commuting
Reload this Page >

Aesthetic Fender Opinions

Notices
Commuting Bicycle commuting is easier than you think, before you know it, you'll be hooked. Learn the tips, hints, equipment, safety requirements for safely riding your bike to work.

Aesthetic Fender Opinions

Old 10-22-19, 10:16 AM
  #1  
Falkon 
No Talent Assclown
Thread Starter
 
Falkon's Avatar
 
Join Date: Jan 2006
Location: Southern US :(
Posts: 1,319

Bikes: 1984 Ciocc Designer '84, Custom Columbus EL Keith Anderson -- Ultegra/DA 10sp mix, 2019 Trek Checkpoint AL All-arounder

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 87 Post(s)
Liked 27 Times in 23 Posts
Aesthetic Fender Opinions

This is probably gonna come off bougie for this sub, but bear with me. I'm getting a bike to use as a commuter, all around fun riding bike, and light touring. I haven't built or bought a new ride in a good ten years, and I didn't even pay enough attention to learn about these so-called gravel bikes or know that road bikes that aren't even cyclocross bikes are being fitted with hydraulic disc brakes! I'm picking up one of these gravel bikes in a dark green color with black components. This being the first build I've done in a decade, I'm kind of springing on the accessories with a honey leather saddle with copper rails and matching bar tape. I've still got a good rack from my poor vintage bike that was never really made to take one. I'm now eyeing fenders.

Can I get some honest opinions on looks here, taking into account being able to functionally use these commuting long term? Cost isn't so much an issue here. Weight is only somewhat an issue.
- Handsome Cycles Hammered Fenders in Copper - $70, Aluminum, 45mm; Pro: copper anodizing would look good with the dark green and copper saddle rails; Con: have to be drilled to put on a separate mud flap, single stay on each fender, maybe TOO attention getting?
- SKS P45 Longboard Fenders - $45, Aluminum core plastic, 45mm; Pro: Well known, tried and true fenders with safety tabs, match black components, already have mud flaps; Con: Some have issues with them cracking, don't look quite as nice as aluminum, heavier than most aluminum fenders
- Planet Bike Cascadia ALX Fenders in Black - $65, Aluminum, 42mm; Pro: Well reviewed, match black components, have safety tabs, already have mud flaps
- Portland Design Works Metal Fenders in Black - $120, Aluminum, 45mm; Pro: Well reviewed, match black components, have safety tabs, already have mud flaps; Con: Single fender stays, Why are they almost twice the price of the Planet Bike fenders?
- Woody's Fenders Wood Compound Curve Fenders - $200, Hardwood (heh) laminates, ~45mm; Pro: Absolutely beautiful, colors of link example coordinate well with the bike; Con: Expensive, may not hold up so well to my abuse, unknown weight at this time, too attention getting?

These are what have caught my eye. Functionally, I think all will do their intended job, but I'm going kind of nuts for aesthetics here. What do y'all think?

Edit: I should add, This Trek ALR 5 is what I have ordered. Unfortunately, my size in that color is on backorder for a bit. That gives me time to spread out purchases on these accessories while I keep riding my old Ciocc to work.
__________________
Fällt der Pfarrer in den Mist, lacht der Bauer bis er pisst.

Last edited by Falkon; 10-22-19 at 08:21 PM.
Falkon is offline  
Old 10-22-19, 10:31 AM
  #2  
antdd
Newbie
 
Join Date: Aug 2019
Location: Montreal
Posts: 36

Bikes: commuter: Soma Wolverine, Patria Roadster / cargo: Nihola Family

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 21 Post(s)
Likes: 0
Liked 6 Times in 5 Posts
Have a look at Honjo, I find them from Germany at bike-components.de cheaper then from other shops, I ordered mine to Canada (think 20 Euro shipping, but I had other parts as well). Haven't mounted them yet, but I read only nice comments. I got the H50.
antdd is offline  
Old 10-22-19, 02:49 PM
  #3  
rumrunn6
Senior Member
 
rumrunn6's Avatar
 
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,520

Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0

Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5218 Post(s)
Liked 3,564 Times in 2,331 Posts
here's a vote for wooden!
rumrunn6 is offline  
Old 10-22-19, 02:55 PM
  #4  
ThermionicScott 
working on my sandal tan
 
ThermionicScott's Avatar
 
Join Date: Aug 2011
Location: CID
Posts: 22,625

Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)

Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3868 Post(s)
Liked 2,560 Times in 1,574 Posts
Velo-Orange fenders are available in black, too.
__________________
Originally Posted by chandltp
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
RUSA #7498
ThermionicScott is offline  
Old 10-22-19, 03:19 PM
  #5  
Falkon 
No Talent Assclown
Thread Starter
 
Falkon's Avatar
 
Join Date: Jan 2006
Location: Southern US :(
Posts: 1,319

Bikes: 1984 Ciocc Designer '84, Custom Columbus EL Keith Anderson -- Ultegra/DA 10sp mix, 2019 Trek Checkpoint AL All-arounder

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 87 Post(s)
Liked 27 Times in 23 Posts
Originally Posted by ThermionicScott
Velo-Orange fenders are available in black, too.
This is true. I didn't include them, because their listed style in around the 45mm width and in black are the hammered fenders, which are pretty close to the same as the Handsome Cycles black hammered fenders in both price and design.
I'm just having trouble deciding what would really look well coordinated without looking gaudy on such a bike. I kinda miss my old, green, 1970s Raleigh 3-speed for the style, but I'll be damned if I wanna ride that up the hills every day in traffic. There was not a single part of that bike that wasn't steel.
__________________
Fällt der Pfarrer in den Mist, lacht der Bauer bis er pisst.
Falkon is offline  
Old 10-22-19, 04:16 PM
  #6  
RubeRad
Keepin it Wheel
 
RubeRad's Avatar
 
Join Date: Aug 2011
Location: San Diego
Posts: 10,238

Bikes: Surly CrossCheck, Krampus

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Liked 3,399 Times in 2,510 Posts
For aesthetics alone, I would also be heading towards wood. But if attention-getting is a minus (i.e. avoiding thievery) maybe not.
RubeRad is offline  
Likes For RubeRad:
Old 10-22-19, 04:51 PM
  #7  
PaulH
Senior Member
 
Join Date: Jan 2002
Location: Washington, DC
Posts: 3,710
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 118 Post(s)
Liked 88 Times in 61 Posts
I have Gilles Berthoud Stainless steel fenders. They are long-lasting, durable, and you can mount a taillight on them. I got a set of Planet Bike fenders for my daughter's bike and we both hate them -- spindly, fussy, don't stay in alignment. For aesthetics, though, I think those hammered copper ones are the clear winner.
PaulH is offline  
Likes For PaulH:
Old 10-22-19, 05:41 PM
  #8  
Darth Lefty 
Disco Infiltrator
 
Darth Lefty's Avatar
 
Join Date: May 2013
Location: Folsom CA
Posts: 13,775

Bikes: Stormchaser, Paramount, Tilt, Samba tandem

Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,102 Times in 1,366 Posts
Soma Fabrications sells fenders color matched to their frames
__________________
Genesis 49:16-17
Darth Lefty is offline  
Likes For Darth Lefty:
Old 10-22-19, 08:17 PM
  #9  
frankenmike 
mechanically sound
 
frankenmike's Avatar
 
Join Date: Jan 2007
Location: Dover, NH
Posts: 1,606

Bikes: Indy Fab steel deluxe, Aventon cordoba, S-works stumpy fsr, Masi vincere, Dahon mu uno, Outcast 29 commuter

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 100 Post(s)
Liked 84 Times in 53 Posts
I vote for sks. Set and forget, bomber. Get some without mudflaps, add custom ones to coordinate with the bike.
__________________
frankenmike is offline  
Old 10-22-19, 08:24 PM
  #10  
Falkon 
No Talent Assclown
Thread Starter
 
Falkon's Avatar
 
Join Date: Jan 2006
Location: Southern US :(
Posts: 1,319

Bikes: 1984 Ciocc Designer '84, Custom Columbus EL Keith Anderson -- Ultegra/DA 10sp mix, 2019 Trek Checkpoint AL All-arounder

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 87 Post(s)
Liked 27 Times in 23 Posts
Originally Posted by RubeRad
For aesthetics alone, I would also be heading towards wood. But if attention-getting is a minus (i.e. avoiding thievery) maybe not.
That's what I'm worried about. For the most part, this bike is going between home and work, where there's a rack and many cameras, and to the grocery store, coffee shop, and a few other places. Bike theft here is not rampant and is more of a crime of opportunity. I have a substantial chain lock. I still wanna be careful about being too flashy. I get excited, because it's an opportunity to build a dream commuter (within reason), and I love beautiful bikes.

Originally Posted by PaulH
I have Gilles Berthoud Stainless steel fenders. They are long-lasting, durable, and you can mount a taillight on them. I got a set of Planet Bike fenders for my daughter's bike and we both hate them -- spindly, fussy, don't stay in alignment. For aesthetics, though, I think those hammered copper ones are the clear winner.
Thanks for the feedback. Are you using the aluminum Planet Bike fenders? The steel fenders are a bit heavier than I'd like to go. I know it's kind of pointless to obsess about weight on a commuter, but I do have to push this thing up a few hills. I live in the foothills of the Appalachians, and I'm already feeling it enough on my Italian bike with a backpack.
__________________
Fällt der Pfarrer in den Mist, lacht der Bauer bis er pisst.

Last edited by Falkon; 10-22-19 at 08:28 PM.
Falkon is offline  
Old 10-22-19, 08:55 PM
  #11  
SalsaShark
Senior Member
 
SalsaShark's Avatar
 
Join Date: Nov 2014
Location: Eastern Iowa
Posts: 631

Bikes: 2014 Trek Allant drop bar conversion, modified Schwinn MTN commuter, 2015 Trek 520, Soma ES, Salsa Journeyman, 1980 Trek 414

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 178 Post(s)
Liked 355 Times in 166 Posts
Just do like i did and paint up a set of aluminum fenders to match the frame. I went with the Velo Orange Zeppelin set, which are sturdy and super functional.
SalsaShark is offline  
Likes For SalsaShark:
Old 10-23-19, 08:58 AM
  #12  
RubeRad
Keepin it Wheel
 
RubeRad's Avatar
 
Join Date: Aug 2011
Location: San Diego
Posts: 10,238

Bikes: Surly CrossCheck, Krampus

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Liked 3,399 Times in 2,510 Posts
That looks really slick! What kind of paint/method did you use?
RubeRad is offline  
Old 10-23-19, 09:02 AM
  #13  
JaccoW
Overdoing projects
 
JaccoW's Avatar
 
Join Date: Oct 2011
Location: Rotterdam, former republic of the Netherlands
Posts: 2,443

Bikes: Batavus Randonneur GL, Gazelle Orange Excellent, Gazelle Super Licht, Gazelle Grand Tourist, Gazelle Lausanne, Gazelle Tandem, Koga-Miyata SilverAce, Koga-Miyata WorldTraveller

Mentioned: 58 Post(s)
Tagged: 0 Thread(s)
Quoted: 783 Post(s)
Liked 1,215 Times in 677 Posts
Any pictures of the bike as it is?

I recently used the long Gilles Berthoud stainless steel fenders on a commuter bike. They seem nice and sturdy and stay virtually free of blemishes.
I'm planning to use them on another commuter build for myself + some Honjo hardware.
The coverage is great in front if you prefer a front carrier.

EDIT: Also available in matt black powedercoat
EDIT2: According to SJS the 50mm (fits 35-42mm) version weighs 785 gram (1.73 lbs). To put that into perspective, the SKS P45 (fits 28-27mm) weigh 689 grams (1.518 lbs) PDW's aluminum model (fits 35mm max) is 568 gram (1.25 lbs).



@DHPflaumer has a green bike with brass Honjo fenders if you really want heavy. Beautiful to see though and will get a nice patina over the years


Last edited by JaccoW; 10-23-19 at 09:22 AM.
JaccoW is offline  
Likes For JaccoW:
Old 10-23-19, 09:47 AM
  #14  
RubeRad
Keepin it Wheel
 
RubeRad's Avatar
 
Join Date: Aug 2011
Location: San Diego
Posts: 10,238

Bikes: Surly CrossCheck, Krampus

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Liked 3,399 Times in 2,510 Posts
That's also a pretty chainguard on the gazelle
RubeRad is offline  
Likes For RubeRad:
Old 10-23-19, 10:15 AM
  #15  
Falkon 
No Talent Assclown
Thread Starter
 
Falkon's Avatar
 
Join Date: Jan 2006
Location: Southern US :(
Posts: 1,319

Bikes: 1984 Ciocc Designer '84, Custom Columbus EL Keith Anderson -- Ultegra/DA 10sp mix, 2019 Trek Checkpoint AL All-arounder

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 87 Post(s)
Liked 27 Times in 23 Posts
Originally Posted by JaccoW
Any pictures of the bike as it is?

I recently used the long Gilles Berthoud stainless steel fenders on a commuter bike. They seem nice and sturdy and stay virtually free of blemishes.
I'm planning to use them on another commuter build for myself + some Honjo hardware.
The coverage is great in front if you prefer a front carrier.

EDIT: Also available in matt black powedercoat
EDIT2: According to SJS the 50mm (fits 35-42mm) version weighs 785 gram (1.73 lbs). To put that into perspective, the SKS P45 (fits 28-27mm) weigh 689 grams (1.518 lbs) PDW's aluminum model (fits 35mm max) is 568 gram (1.25 lbs).



@DHPflaumer has a green bike with brass Honjo fenders if you really want heavy. Beautiful to see though and will get a nice patina over the years
I edited the OP with a link to the bike. I don't have a real life pic, because the size and color I want is unfortunately on back order. They're saying December, and I'm hoping for sooner. British racing green is one of my favorite colors of all time. It doesn't hurt that I used to race in the auto club with the MG guys.

I didn't rule out brands like Velo-Orange and Hanjo. I've looked at them as well. There are at least three different makers that have black, hammered (or smooth), aluminum fenders. That's why I'm more focusing on the aesthetics. Those brass colored fenders look neat.
I managed to find a live "non-glamour" picture of the copper ones. I like this.
__________________
Fällt der Pfarrer in den Mist, lacht der Bauer bis er pisst.
Falkon is offline  
Likes For Falkon:
Old 10-23-19, 02:41 PM
  #16  
Unca_Sam
The dropped
 
Unca_Sam's Avatar
 
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,406

Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times in 696 Posts
It's your bike, so you know, do what you want. Your chosen steed is beautiful!

My opinion: If you're keeping the black components, go with black and try to match the finish. The components look like a matte black, and luckily there are matte black fenders. This style frame to me should say 'sport' and not 'townie', so I would keep the colors simple. I'm concerned for your clearances though, your linked bike doesn't show a lot of room in the fork crown or between the tire and the seat tube. I was more comfortable using sks long raceblades on my 5200, due to clearance at the fork crown and no chainstay bridge.

Quick as the wind!

I know the man is polarizing, but I tend to agree with Jan Heine on fender lines. The curve radius should closely match the wheel radius without much deviation for maximum aesthetics. That's far simpler with steel and aluminum fenders than it is with plastic, and yet I have no aluminum fenders. I'm working on it though.
Unca_Sam is offline  
Old 10-23-19, 02:43 PM
  #17  
DHPflaumer
Senior Member
 
DHPflaumer's Avatar
 
Join Date: May 2019
Location: Somerville, MA
Posts: 106

Bikes: Norther Klickitat Pass, Masi Giramondo 27.5, Soma Grand Randonneur

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 39 Post(s)
Liked 59 Times in 26 Posts
As the owner of brass fenders... They're so awesome. I get infinite compliments even from non-bike folks. You absolutely sort of forget about the weight after a while, though I'm 100% NOT a weight watcher, so your mileage may vary.

I'll also say that mine are generally quite a lot more patina'd than they look in that photo. Here are some photos that show it a bit better. I do periodically shine the grooves just for some contrast (qtips and brasso)




Last edited by DHPflaumer; 10-23-19 at 02:50 PM.
DHPflaumer is offline  
Likes For DHPflaumer:
Old 10-23-19, 03:24 PM
  #18  
Falkon 
No Talent Assclown
Thread Starter
 
Falkon's Avatar
 
Join Date: Jan 2006
Location: Southern US :(
Posts: 1,319

Bikes: 1984 Ciocc Designer '84, Custom Columbus EL Keith Anderson -- Ultegra/DA 10sp mix, 2019 Trek Checkpoint AL All-arounder

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 87 Post(s)
Liked 27 Times in 23 Posts
Originally Posted by Unca_Sam
It's your bike, so you know, do what you want. Your chosen steed is beautiful!

My opinion: If you're keeping the black components, go with black and try to match the finish. The components look like a matte black, and luckily there are matte black fenders. This style frame to me should say 'sport' and not 'townie', so I would keep the colors simple. I'm concerned for your clearances though, your linked bike doesn't show a lot of room in the fork crown or between the tire and the seat tube. I was more comfortable using sks long raceblades on my 5200, due to clearance at the fork crown and no chainstay bridge.

Quick as the wind!

I know the man is polarizing, but I tend to agree with Jan Heine on fender lines. The curve radius should closely match the wheel radius without much deviation for maximum aesthetics. That's far simpler with steel and aluminum fenders than it is with plastic, and yet I have no aluminum fenders. I'm working on it though.
We're on the same page. All that I listed will match or coordinate well with at least one part. I'm just kinda stuck in the choice, because they all seem like they'd look good! Copper works with the copper rails and rivets in the saddle and looks good with the dark green. Matte black matches the components, which other than saddle, bar tape, and tires I have no urge to change. Wood coordinates with the colors and actually matches the leather. The clearances look tight in those pictures, because that bike comes mounted with 40c tires and has a max 45c tire width. I'm immediately trading these for tires somewhere in the range of 28c to 35c. I'm trying to balance rolling resistance with ride comfort and resistance to the horrible roads here. The railroad crossings are the worst, and actually seem to get worse every time the city repaves them.
__________________
Fällt der Pfarrer in den Mist, lacht der Bauer bis er pisst.
Falkon is offline  
Old 10-23-19, 03:29 PM
  #19  
edsta74
Member
 
Join Date: Jul 2015
Location: LIC, NY
Posts: 39

Bikes: 2014 Specialized Secteur Sport Disc

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 24 Times in 11 Posts
I went with the Handsome fenders. I still have to tweak the front a bit, but I like them..


edsta74 is offline  
Likes For edsta74:
Old 10-23-19, 03:31 PM
  #20  
Unca_Sam
The dropped
 
Unca_Sam's Avatar
 
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,406

Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times in 696 Posts
@Falkon

Matte black. The saddle and everything with it is a choice (it'd be black on this bike for me!) I wouldn't coordinate a fixed part of the bike with the saddle, I'd do the opposite. I'd only consider wood on a cruiser, and probably only a beach cruiser at that. You know saying about opinions, they're like *******s, everyone has one and they all stink!
Unca_Sam is offline  
Likes For Unca_Sam:
Old 10-23-19, 03:49 PM
  #21  
noglider 
aka Tom Reingold
 
noglider's Avatar
 
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,691

Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem

Mentioned: 510 Post(s)
Tagged: 0 Thread(s)
Quoted: 7287 Post(s)
Liked 2,361 Times in 1,380 Posts
Those copper fenders look amazing.

Those stainless steel fenders mentioned above sound ideal for durability.

Even Wald chromed steel fenders look pretty decent except that the struts are ugly galvanized.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog

“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author

Please email me rather than PM'ing me. Thanks.
noglider is offline  
Old 10-23-19, 06:42 PM
  #22  
SalsaShark
Senior Member
 
SalsaShark's Avatar
 
Join Date: Nov 2014
Location: Eastern Iowa
Posts: 631

Bikes: 2014 Trek Allant drop bar conversion, modified Schwinn MTN commuter, 2015 Trek 520, Soma ES, Salsa Journeyman, 1980 Trek 414

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 178 Post(s)
Liked 355 Times in 166 Posts
Originally Posted by RubeRad
That looks really slick! What kind of paint/method did you use?
I originally meticulously masked off the lines and sprayed with Rustoleum enamel, but it got messed up when the masking was pulled, so i ended up redoing it by hand with brushes and canned Rustoleum. The lines aren't as sharp as they were when sprayed, but from a few feet away, it looks pretty decent!
SalsaShark is offline  
Old 10-23-19, 07:00 PM
  #23  
RubeRad
Keepin it Wheel
 
RubeRad's Avatar
 
Join Date: Aug 2011
Location: San Diego
Posts: 10,238

Bikes: Surly CrossCheck, Krampus

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Liked 3,399 Times in 2,510 Posts
yah, even the first pic looks very clean, and it does look thick and glossy like enamel
RubeRad is offline  
Old 10-24-19, 08:07 AM
  #24  
RidingMatthew
Let's Ride!
 
RidingMatthew's Avatar
 
Join Date: Jul 2008
Location: Triad, NC USA
Posts: 2,569

Bikes: --2010 Jamis 650b1-- 2016 Cervelo R2-- 2018 Salsa Journeyman 650B

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 37 Times in 24 Posts

Originally Posted by Falkon
This is probably gonna come off bougie for this sub, but bear with me. I'm getting a bike to use as a commuter, all around fun riding bike, and light touring. I haven't built or bought a new ride in a good ten years, and I didn't even pay enough attention to learn about these so-called gravel bikes or know that road bikes that aren't even cyclocross bikes are being fitted with hydraulic disc brakes! I'm picking up one of these gravel bikes in a dark green color with black components. This being the first build I've done in a decade, I'm kind of springing on the accessories with a honey leather saddle with copper rails and matching bar tape. I've still got a good rack from my poor vintage bike that was never really made to take one. I'm now eyeing fenders.

Can I get some honest opinions on looks here, taking into account being able to functionally use these commuting long term? Cost isn't so much an issue here. Weight is only somewhat an issue.
- Handsome Cycles Hammered Fenders in Copper - $70, Aluminum, 45mm; Pro: copper anodizing would look good with the dark green and copper saddle rails; Con: have to be drilled to put on a separate mud flap, single stay on each fender, maybe TOO attention getting?
- SKS P45 Longboard Fenders - $45, Aluminum core plastic, 45mm; Pro: Well known, tried and true fenders with safety tabs, match black components, already have mud flaps; Con: Some have issues with them cracking, don't look quite as nice as aluminum, heavier than most aluminum fenders
- Planet Bike Cascadia ALX Fenders in Black - $65, Aluminum, 42mm; Pro: Well reviewed, match black components, have safety tabs, already have mud flaps
- Portland Design Works Metal Fenders in Black - $120, Aluminum, 45mm; Pro: Well reviewed, match black components, have safety tabs, already have mud flaps; Con: Single fender stays, Why are they almost twice the price of the Planet Bike fenders?
- Woody's Fenders Wood Compound Curve Fenders - $200, Hardwood (heh) laminates, ~45mm; Pro: Absolutely beautiful, colors of link example coordinate well with the bike; Con: Expensive, may not hold up so well to my abuse, unknown weight at this time, too attention getting?

These are what have caught my eye. Functionally, I think all will do their intended job, but I'm going kind of nuts for aesthetics here. What do y'all think?

Edit: I should add, This Trek ALR 5 is what I have ordered. Unfortunately, my size in that color is on backorder for a bit. That gives me time to spread out purchases on these accessories while I keep riding my old Ciocc to work.
Planet Bike Cascadia ALX Fenders in Black - $65, Aluminum, 42mm; Pro: Well reviewed, match black components, have safety tabs, already have mud flaps


I have 60mm on my Journeyman and I love them they are solid. I rode 86.96 miles of gravel with them on a few weeks ago. I got a compliment from one of the motocycle riders helping with the ride.
RidingMatthew is offline  
Likes For RidingMatthew:
Old 10-24-19, 09:17 AM
  #25  
Falkon 
No Talent Assclown
Thread Starter
 
Falkon's Avatar
 
Join Date: Jan 2006
Location: Southern US :(
Posts: 1,319

Bikes: 1984 Ciocc Designer '84, Custom Columbus EL Keith Anderson -- Ultegra/DA 10sp mix, 2019 Trek Checkpoint AL All-arounder

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 87 Post(s)
Liked 27 Times in 23 Posts
Originally Posted by Unca_Sam
@Falkon

Matte black. The saddle and everything with it is a choice (it'd be black on this bike for me!) I wouldn't coordinate a fixed part of the bike with the saddle, I'd do the opposite. I'd only consider wood on a cruiser, and probably only a beach cruiser at that. You know saying about opinions, they're like *******s, everyone has one and they all stink!
I did ask for for the opinions though. So, I appreciate yours. I'm leaning toward matte black or copper now. You're helping me narrow it down. Copper looks good with the dark green in my opinion, regardless of the rest. Matte black would match the 105 component set. Also, I don't think I can get myself to drop the $200 on wood fenders for a bike that's going to go over crappy rough railroad crossings that I'm already afraid are gonna blow the little 23c tires on my current bike.
__________________
Fällt der Pfarrer in den Mist, lacht der Bauer bis er pisst.
Falkon is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.