Go Back  Bike Forums > Bike Forums > Touring
Reload this Page >

Which Brooks Saddle?

Notices
Touring Have a dream to ride a bike across your state, across the country, or around the world? Self-contained or fully supported? Trade ideas, adventures, and more in our bicycle touring forum.

Which Brooks Saddle?

Old 10-23-21, 04:09 PM
  #1  
Colorado Kid
Senior Member
Thread Starter
 
Join Date: Jun 2013
Posts: 872
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 357 Post(s)
Likes: 0
Liked 136 Times in 82 Posts
Which Brooks Saddle?

I have a bad back. (From the Cancer that destroyed my back.) i have a B-17 on my 81' Schwinn Voyageur 11.8. Someone at LBS said I should switch to spring model such as B66 or other such models. My back feels fine on a B-17 but on long or rough roads it's something else. Does anyone use a Brooks B-66 or other such model on their touring bike and if so, does it make a difference?
Colorado Kid is offline  
Old 10-23-21, 05:21 PM
  #2  
Tourist in MSN
Senior Member
 
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,112

Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.

Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 3426 Post(s)
Liked 1,441 Times in 1,122 Posts
The Flyer is the same as a B17, but it has springs in the rear. But before you run out and buy one, the springs are very stiff. I use a Conquest which has the same springs as the B17, when I put my weight on the saddle it only depresses the springs maybe 5mm, so you are not getting a much smoother ride. I think they are best on a rough pavement like chip seal that can give you almost a vibration type of ride. So, if you are on a smooth road, I think the springs on a Flyer would not feel any different than what you already have.

I know nothing about the B66.

I wonder if a suspension seatpost might work better? Sometimes I use a cheap telescoping type one on gravel, the one I use is like the cheap ones that are common on some hybrids, but it does not do much.

These might work better: They are similar to the Thudbuster. But I have never used one like these.



Tourist in MSN is offline  
Old 10-24-21, 06:04 AM
  #3  
djb
Senior Member
 
Join Date: Jul 2010
Location: Montreal Canada
Posts: 13,191
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 2732 Post(s)
Liked 953 Times in 784 Posts
Like tourist, I regularly ride a sprung flyer (a b17 with springs) on my commuter, and I'd have to agree with tourists assessment. If I whack into a pothole it absorbs a certain amount, but because I'm a lightweight, I'd say the overall effect is limited.
I think it is more flexible or springy than when I got it years back, but just be aware that the springs are indeed pretty stiff.

you'd really have to do a back to back trial with your existing seat to get a proper idea.
I bought mine used just because it looks cool as an object with the springs and copper rivets, but I suspect for you and your specific serious back issue, a good suspension seatpost would be more effective.

if you were here I'd let you ride on mine, but to buy one, go through the leather break in period, only to find it doesn't help, would be a drag.
But maybe it would help, how much do you weigh?

oh, I'd seriously look at wider tires, the effect of a nice tire with volume and proper psi makes a huge difference in ride comfort. I've ridden a lot on 2inch tires that have fantastic suspension at the right pressures for my weight
what type of bike do you use? What's the widest tire it can take?
djb is offline  
Likes For djb:
Old 10-24-21, 08:04 AM
  #4  
fishboat
Senior Member
 
Join Date: Feb 2016
Location: SE Wisconsin
Posts: 1,890

Bikes: Lemond '01 Maillot Jaune, Lemond '02 Victoire, Lemond '03 Poprad, Lemond '03 Wayzata DB conv(Poprad), '79 AcerMex Windsor Carrera Professional(pur new), '88 GT Tequesta(pur new), '01 Bianchi Grizzly, 1993 Trek 970 DB conv, Trek 8900 DB conv

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 751 Post(s)
Likes: 0
Liked 799 Times in 467 Posts
I run 2 inch tires (Schwalbe Big Bens, about 45-50psi, depending on load) and a B17 Flyer on my touring (dropbar converted mtn) bike. The ride is much softer than than a B17 Imperial equipped CX bike that I run 700 x 38s (Panaracer Gtravelking slicks, 65ish psi) on, which has a much softer ride than B17 Imperial equipped road bike with Gravelking 28mm slicks(85-90ish psi). Tires will be the biggest bang for your buck.

I can feel the springs in the flyer working, though they are stiff. I rode the touring bike with a B17 Imperial before I got the Flyer. I definitely felt a ride improvement with with the Flyer.

A combo of good(fast, easy rolling) 2 inch road tires, a Flyer (or 66), and a good quality suspension seatpost would help quite a bit, I'd think. The only additional thing might be to ride with a suspension fork. All this could be done and still have a bike with excellent performance. My touring bike is a fun(!) bike to ride, with or without a touring load. With a touring load is probably the best.
fishboat is offline  
Old 10-24-21, 12:37 PM
  #5  
Colorado Kid
Senior Member
Thread Starter
 
Join Date: Jun 2013
Posts: 872
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 357 Post(s)
Likes: 0
Liked 136 Times in 82 Posts
Good advice! I think I can get 700+28 on the bike which I going to switching to. ( I have 700+23 on it now.) My commuter/Mt. bike both have some type of Brooks saddle with Springs. They feels super. As to witch Brooks to switch to, I'm not sure as of yet. I ride 80% road to 20% off road. Any other advice to might led me to one seat or another?
Colorado Kid is offline  
Old 10-24-21, 02:35 PM
  #6  
zandoval 
Senior Member
 
zandoval's Avatar
 
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,416

Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 929 Post(s)
Liked 1,595 Times in 1,021 Posts
It's hard to beat a standard B17. I don't think you would get much change adding springs. The biggest change for back comfort on my rides has been a bike I installed Kenda K184 27x1-3/8 tires on. At first the change seemed dramatic going from 27x28 to a wider tire and lower pressure. There was really not much change in speed as change in ridding comfort. It's not such a bad thing us making changes to accommodate bad backs. We raise our bars, lower our seats, and go to fatter tiers tires... Ha

Of course I still miss flying down the road on my 22 tubulars with my stem slammed and my butt of the seat with my toe clips tight... but then again there's allot of things I miss...
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
zandoval is online now  
Old 10-24-21, 08:31 PM
  #7  
djb
Senior Member
 
Join Date: Jul 2010
Location: Montreal Canada
Posts: 13,191
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 2732 Post(s)
Liked 953 Times in 784 Posts
Only you know what your specific back situation is, but I can't emphasize how wider and wider tires make such a difference to more comfort for hands and bum/back.
I've ridden on 28, 32,35, 40, 50, 55 and it's been very interesting noticing the changes and appreciating the increasing cush. Of course some tires are more supple so they h have a nicer feel and "give" , which your n back would really appreciate.

anyway, some thought to a bike that could take much wider than 28, it could very well make all the difference for your comfort.
djb is offline  
Likes For djb:
Old 10-24-21, 08:35 PM
  #8  
deaninkl
Junior Member
 
Join Date: Mar 2017
Location: Kuala Lumpur, Malaysia, and Linkou, Taiwan
Posts: 187

Bikes: 2009 Giant TCR Aluxx SL, 2015 Bruno 700c Tour, Canyon Urban 8.0, Giant FCR 2018,

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 48 Post(s)
Liked 14 Times in 11 Posts
I have both the B17 and the Flyer on different bikes. For a long while I thought the springs in the flyer were so stiff to make them almost redudant.. so I did some reading and fould that they are basically set for larger riders, and meant to take the shock out of holes in the road. As with any brooks you have to persivere and break it in properlly, as you already have the B17, you'll know that well. I have not tried the B66, but I understand that has softer springs.. whould be worth checking the specs for that from Brooks or their agent..

Know that I know the springs in the flyer are stiff and understand whats going on and as its slowly breaking in, I do see a difference over the B17, but it does take time.
deaninkl is offline  
Old 10-24-21, 09:47 PM
  #9  
ChrisCrash
Junior Member
 
Join Date: May 2018
Posts: 16
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Liked 2 Times in 1 Post
I bought a bike and it came with the brooks with the springs. My first thought was, "well, that's gotta go". I've tried a couple of brooks in the past and to put it bluntly, they were a pain in they a**. But this one? Don't ask me why, but it's great. The only thing I can think of is the bike is pretty upright, and I've angled the saddle to be a bit nose up. I love it, I don't care that it weighs ** whatever grams more. And I love the bit of suspension I get from it as I also have back issues. And it just looks cool IMO. The only difference between this brooks and other I've tried is that it is brown leather instead of
ChrisCrash is offline  
Old 10-24-21, 09:58 PM
  #10  
ChrisCrash
Junior Member
 
Join Date: May 2018
Posts: 16
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Liked 2 Times in 1 Post
And to add to the theme here - given my back issues I've found nothing beats high volume "supple" (yes, there it is) tires. I changed my bike from 700 to 650b and run 47mm WTB byways, tubeless, at around 30psi for on road and a bit lower off road. On my commuter, its 650 x 48mm gravel kings, also tubeless.
This has made a huge difference. I mean night and day. Feels like floating on air... because you are
I bought some decent lightweight wheels so there's not a big weight penalty. They're a bit slower, but that's OK by me. If your bike won't accommodate fat meats, there are now a lot of 'affordable' all-road type bikes out there. Marin and Breezer on the lower priced side, Surly and All City on the heavier side, Salsa and Ritchey have good options, and a lot of carbon bikes from the big bike co's that have now jumped on the bandwagon.
ChrisCrash is offline  
Old 10-25-21, 04:25 AM
  #11  
Tourist in MSN
Senior Member
 
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,112

Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.

Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 3426 Post(s)
Liked 1,441 Times in 1,122 Posts
I agree with everyone that suggested wider tires. My road bike has 28mm tires, those are the narrowest tires I run on any of my bikes. If you have 23mm tires, go shopping for tires first. This being the touring forum, I assumed you were on tires that were at least 30mm wide when I read your first post. It had not occurred to me that you were on some rock hard skinny tires.

Someone above suggested suspension fork, I do not agree on that. Your problem is your saddle, not your hands on the handlebars.

If you have a physical therapist for your back, perhaps you should have that conversation with your PT, as they have the X rays they can look at and give it some thought. I told my back PT that I have my bike saddle turned slightly to the left (a straight line through my saddle would be about an inch to the left of my stem bolt, not directly through that bolt). When she was looking at the X rays of my back she said she was not surprised that I had my saddle turned slightly to one side. She is a spine specialist in a spinal clinic.
Tourist in MSN is offline  
Old 10-25-21, 05:05 AM
  #12  
fishboat
Senior Member
 
Join Date: Feb 2016
Location: SE Wisconsin
Posts: 1,890

Bikes: Lemond '01 Maillot Jaune, Lemond '02 Victoire, Lemond '03 Poprad, Lemond '03 Wayzata DB conv(Poprad), '79 AcerMex Windsor Carrera Professional(pur new), '88 GT Tequesta(pur new), '01 Bianchi Grizzly, 1993 Trek 970 DB conv, Trek 8900 DB conv

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 751 Post(s)
Likes: 0
Liked 799 Times in 467 Posts
Originally Posted by Tourist in MSN
...
Someone above suggested suspension fork, I do not agree on that. Your problem is your saddle, not your hands on the handlebars.
...
...in addition to 2 inch tires, a B66(67), and a suspension seat post..thought being that your hands & arms are bolted directly to your shoulders & thereby your back. Reducing long term(long ride) jolts to your shoulders(in spite of slightly bent arms..) may help back issues. Odd movements can trigger back issues...particularly those that continue for hours. A suspension fork may or may not help(I'd try the other paths first), but it's an option that does help smooth out rough surfaces.
fishboat is offline  
Old 10-25-21, 06:23 AM
  #13  
djb
Senior Member
 
Join Date: Jul 2010
Location: Montreal Canada
Posts: 13,191
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 2732 Post(s)
Liked 953 Times in 784 Posts
The other thing Colorado is how much riding experience you have and how much you ride.
Are you a beginner who bought a used 23mm shod road bike and ride once a month or a long time rider who loves riding?
I bring this up because only you and you doctor know your back specifics, but if riding is important to you, really do consider a new bike that can take tires up to 40, 45mm, because
1-its been pretty much proven that on some really good tires, fatter tires are just as fast at real life speeds (non pro peleton) yet TONS more comfortable
2-life is too damn short to be riding an uncomfortable bike, especially for your affected back and who has dealt with a crappy medical situation.

serious suggestion, test ride a relaxed shaped frame (ie not a pro peleton slammed low headset racer) that numerous gravel bikes are, or a tourer with tall front end, but can take wide tires. Bring a pressure gauge and you'll see how large volume low pressure tires are a game changer BUT DO NOT listen to your 23mm experience of what "feels" fast, ie no sharp hard road vibrations actually can be as fast.....ya ya no one believes this at first, but it's true--and it'll save your back!
djb is offline  
Old 10-25-21, 06:30 AM
  #14  
djb
Senior Member
 
Join Date: Jul 2010
Location: Montreal Canada
Posts: 13,191
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 2732 Post(s)
Liked 953 Times in 784 Posts
Something to read to back this up
https://www.renehersecycles.com/what-makes-a-bike-fast/
djb is offline  
Old 10-25-21, 07:45 AM
  #15  
Thulsadoom
Senior Member
 
Thulsadoom's Avatar
 
Join Date: Dec 2005
Location: Cape Vincent, NY
Posts: 1,386

Bikes: Specialized Tarmac Expert, 2002 TREK 520, Schwinn Mesa WINTER BIKE, Huffy Rock Creek 29er, 1970s-era Ross ten speed. All my bikes are highly modified(except the Tarmac) yet functional, and generally look beat to ****. .

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 65 Post(s)
Liked 84 Times in 49 Posts
Originally Posted by zandoval
We raise our bars, lower our seats, and go to fatter tiers tires... Ha
Definitely agree with this. Going to a very upright riding style will probably do much more to save your back than anything else. Think cruiser bars, adjustable or long stem, lower saddle, etc.
Thulsadoom is offline  
Likes For Thulsadoom:
Old 10-25-21, 07:56 AM
  #16  
djb
Senior Member
 
Join Date: Jul 2010
Location: Montreal Canada
Posts: 13,191
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 2732 Post(s)
Liked 953 Times in 784 Posts
Originally Posted by Thulsadoom
Definitely agree with this. Going to a very upright riding style will probably do much more to save your back than anything else. Think cruiser bars, adjustable or long stem, lower saddle, etc.
in my case, an upright seating style can be harder on back, but really, only this guy or lady will know what feels best for their back.
re lowering seat, other than for people with limited cycling skills, lowering seat too much is just harder on the knees and back, but again, a walking pace doodle for 20 mins on a beach bike is different than really riding.....but only this person knows......
djb is offline  
Old 10-25-21, 08:25 AM
  #17  
Tourist in MSN
Senior Member
 
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,112

Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.

Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 3426 Post(s)
Liked 1,441 Times in 1,122 Posts
Originally Posted by djb
in my case, an upright seating style can be harder on back, but really, only this guy or lady will know what feels best for their back.
.....
Agree. More upright puts more weight on the lower back, that is less weight on shoulders. If I tried to sit too upright on a bike for a long ride, my lower spine would really protest.

I think a good physical therapist would be able to help. Doctors have a few minutes per visit and don't have time to get into details on how to set up a bike. PTs often have more visits and longer visits and their job is to help with recovery so they are accustomed to patients that want to do certain activities.

A friend of mine was losing his abilty to balance. He bought a trike two years ago. He loves it, but there are serious shortages of those things right now. And my friend is 85, so he is not getting any younger. My point is that if a bike won't work, there are other options, and a recumbant would be one of those options too.
Tourist in MSN is offline  
Old 10-25-21, 08:43 AM
  #18  
Happy Feet
Senior Member
 
Happy Feet's Avatar
 
Join Date: Sep 2015
Location: Left Coast, Canada
Posts: 5,126
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 2236 Post(s)
Liked 1,313 Times in 706 Posts
Good discussion.

I have a Velo Orange touring saddle, very similar to the Brooks Flyer (a knock off I think) and it is comfortable for what we would used to call 10 speed type riding (aero). I think the springs add a little to the comfort.
I also have a Brooks B67, which is a sprung wider saddle meant for more upright riding, similar to what one would do on a converted mtb type touring bike. I have to say, that is perhaps my most comfortable saddle. But it isn't meant for the aero position.

Also spot on about the tires. The minimum I ride on my road bike is 28mm. I had 23's and could feel all of the road buzz. On my touring bike I aim for 32mm for a bit more cushion.

That would be the first and cheapest step I think, seeing how wide a tire can fit in the frame/fork. At most it will cost one tire for trial (although you may find a shop/friend that already has a tire that size).

Switching to 650b can also be done but it costs a lot more than a saddle. I did this with my endurance bike and needed: Wheels, tires, rotors (disc) tubes, cassette. If you don't have disc it becomes a harder to mate 650b into a 700c brake caliper. Not impossible perhaps but probably requires some adapting.
Happy Feet is offline  
Old 10-25-21, 10:17 AM
  #19  
Tourist in MSN
Senior Member
 
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,112

Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.

Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 3426 Post(s)
Liked 1,441 Times in 1,122 Posts
One more quick note, if you upsize the tires, check both front and rear. Often the front fork is the limiting factor. You might be able to put a wider rear tire in than the front. That is not always the case, my road bike, the seat stay brake bridge in the rear is where the limiting factor is, not the front fork.

My road bike as 28mm tires, my rando bike with fenders has 32mm, my light touring bike with fenders has 37mm tires. Each step up is a different ride.
Tourist in MSN is offline  
Old 10-25-21, 04:05 PM
  #20  
Colorado Kid
Senior Member
Thread Starter
 
Join Date: Jun 2013
Posts: 872
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 357 Post(s)
Likes: 0
Liked 136 Times in 82 Posts
I went to a PT and they said there was nothing they could do for me. (My bad back.) The back doctor said the same thing. It was funny, at the back doctor they took X-rays of my back. The X-Ray nurse said, "Boy, I've just looked at your X-Ray and your back really mess up". No kidding Dick Tracy. Anyway, I went to my LBS today and bought a Brooks B-67 ( a B-17 with springs.).I hope it works. Thanks again everyone for their advice. Later on in the week, I will look into the 700+28s. I was in too muck pain to look at them when I was at the shop for the seat.
Colorado Kid is offline  
Old 10-25-21, 04:28 PM
  #21  
djb
Senior Member
 
Join Date: Jul 2010
Location: Montreal Canada
Posts: 13,191
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 2732 Post(s)
Liked 953 Times in 784 Posts
just so you know, the B67 is wider than the B17.
Its the Flyer thats a B17 with springs.

really look into the 28s, the difference is very very noticeable, especially if you go with some tires that have a nice flexible sidewall, like a Schwalbe Supreme that is supple but also a good wearing tire (as opposed to some very thin and light racing tires)

how much do you weigh btw?
djb is offline  
Old 10-25-21, 04:42 PM
  #22  
axolotl
Member
 
Join Date: Dec 2004
Posts: 2,011
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 285 Post(s)
Liked 120 Times in 88 Posts
So, there was nothing at all worthwhile in any of the 6 other Brooks saddle threads you've started?

https://www.bikeforums.net/commuting...ks-saddle.html

https://www.bikeforums.net/classic-v...ks-saddle.html

https://www.bikeforums.net/tandem-cy...s-saddles.html

https://www.bikeforums.net/commuting...ng-brooks.html

https://www.bikeforums.net/commuting...er-saddle.html

https://www.bikeforums.net/commuting...oks-flyer.html
axolotl is offline  
Old 10-25-21, 07:34 PM
  #23  
djb
Senior Member
 
Join Date: Jul 2010
Location: Montreal Canada
Posts: 13,191
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 2732 Post(s)
Liked 953 Times in 784 Posts
so you do already have a Flyer Mr Co.
djb is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.