ISO and for trade thread part 5
#4451
Full Member
Join Date: Jul 2018
Location: WNY
Posts: 444
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 177 Post(s)
Liked 313 Times
in
162 Posts
Tools on CL in NC
Update: the CL post is down so my gofer must have scored.
__________________
72+76 Super Course, 74 P-10+ 79 Tandem Paramounts, 84 Raleigh Alyeska, 84 Voyageur SP, 85 Miyata Sport 10 mixte and a queue
72+76 Super Course, 74 P-10+ 79 Tandem Paramounts, 84 Raleigh Alyeska, 84 Voyageur SP, 85 Miyata Sport 10 mixte and a queue
Last edited by Schreck83; 12-10-21 at 12:28 PM. Reason: update
#4452
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,729
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2152 Post(s)
Liked 3,402 Times
in
1,203 Posts
Looking for a pointy ended acorn nut from an 80’s Shimano single pivot brake caliper.
The one that holds the caliper mounting bolt on the front of the caliper.
1050, 6207/6208, 7400 would all work. Maybe 6400 or 1055 but it needs to be chrome.
Got a trashed/orphan caliper from one of the above?
The one that holds the caliper mounting bolt on the front of the caliper.
1050, 6207/6208, 7400 would all work. Maybe 6400 or 1055 but it needs to be chrome.
Got a trashed/orphan caliper from one of the above?
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#4453
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,801
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2437 Post(s)
Liked 3,121 Times
in
1,963 Posts
Looking for a pointy ended acorn nut from an 80’s Shimano single pivot brake caliper.
The one that holds the caliper mounting bolt on the front of the caliper.
1050, 6207/6208, 7400 would all work. Maybe 6400 or 1055 but it needs to be chrome.
Got a trashed/orphan caliper from one of the above?
The one that holds the caliper mounting bolt on the front of the caliper.
1050, 6207/6208, 7400 would all work. Maybe 6400 or 1055 but it needs to be chrome.
Got a trashed/orphan caliper from one of the above?
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#4454
Junior Member
ISO: 1¼" Threaded Headset
I need a 1¼ inch threaded headset. A Chris King "Gripnut" headset would be awesome, but I'll take what I can get. Doesn't have to be cosmetically beautiful, but does need to turn smoothly and be serviceable.
#4455
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,729
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2152 Post(s)
Liked 3,402 Times
in
1,203 Posts
That’s exactly what I need, right there.
What would you like in trade?
We can take this off line if you want, e-mail is rccardr@cox.net
Thanks!
What would you like in trade?
We can take this off line if you want, e-mail is rccardr@cox.net
Thanks!
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#4456
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,801
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2437 Post(s)
Liked 3,121 Times
in
1,963 Posts
That’s exactly what I need, right there.
What would you like in trade?
We can take this off line if you want, e-mail is rccardr@cox.net
Thanks!
What would you like in trade?
We can take this off line if you want, e-mail is rccardr@cox.net
Thanks!
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#4457
Not lost wanderer.
Join Date: Jan 2013
Location: Lititz, Pa
Posts: 3,325
Bikes: In USA; 73 Raleigh Super Course dingle speed, 72 Raleigh Gran Sport SS, 72 Geoffry Butler, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 885 Post(s)
Liked 989 Times
in
521 Posts
ISO 34t 110bcd chainring in decent shape, can be used but in VG condition
#4458
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,034
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4510 Post(s)
Liked 6,377 Times
in
3,667 Posts
That looks like an oxygen sensor tool, can't be sure from the fuzzy pic.
#4459
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,113
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 853 Post(s)
Liked 1,434 Times
in
816 Posts
I have numerous 34 T, 110 BCD chain rings. I have 2 Sora 3300, a couple of FSA, and maybe a couple of Ultegra. I can look in the morning, whatever I have, you are welcome to your choice for cost of shipping.
#4460
Not lost wanderer.
Join Date: Jan 2013
Location: Lititz, Pa
Posts: 3,325
Bikes: In USA; 73 Raleigh Super Course dingle speed, 72 Raleigh Gran Sport SS, 72 Geoffry Butler, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 885 Post(s)
Liked 989 Times
in
521 Posts
IF you have them, and willing to give them up, a black and 1 or 2 silver. The shifters, brake levers and RD are Ultegra level.
Likes For bwilli88:
#4463
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,801
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2437 Post(s)
Liked 3,121 Times
in
1,963 Posts
Sure do! PM your address.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
Likes For jdawginsc:
#4464
buy my bikes
Join Date: Jun 2014
Location: Michigan
Posts: 1,800
Bikes: my very own customized GUNNAR CrossHairs
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 519 Post(s)
Liked 428 Times
in
249 Posts
26in 32 hole rim
I’ve got a busted matrix rim with matching front wheel. Front is -unbusted
planning to swap the rear busted rim with an Avenir (don’t want to discuss how I ended up with it…..)
Please let me know if you have either rim available so I can try to make a matching wheel set.
For example- you got a Matrix and I won’t rebuild with the Avenir.
You got an Avenir, I’ll rebuild both.
let me know if you can help.
thanks
#4465
Full Member
Join Date: Dec 2010
Location: SoCal
Posts: 228
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 36 Post(s)
Likes: 0
Liked 53 Times
in
30 Posts
Just as a P.S.A., Robbie on the Classic Rendezvous list recently acquired a sizeable lot of 70's and 80's tubular rims. There are some clinchers, but primarily tubulars. For the rare birds that might be searching for a replacement tubular rim, or building a new set of tubulars, this is an opportunity. Many different manufacturers, models, drillings, many NOS. Located in Ventura, CA. F.Y.I.
Likes For Campagnerdo:
#4466
Junior Member
ISO: 1¼" Threaded Headset
I need a good 1¼" threaded headset. No, that's not a misprint.
Look at this thread if you want to know more:
Look at this thread if you want to know more:
#4467
(rhymes with spook)
Join Date: Aug 2009
Location: Winslow, AR
Posts: 2,788
Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 919 Post(s)
Liked 745 Times
in
546 Posts
I’ve got a busted matrix rim with matching front wheel. Front is -unbusted
planning to swap the rear busted rim with an Avenir (don’t want to discuss how I ended up with it…..)
Please let me know if you have either rim available so I can try to make a matching wheel set.
For example- you got a Matrix and I won’t rebuild with the Avenir.
You got an Avenir, I’ll rebuild both.
let me know if you can help.
thanks
btw, i found those suntour parts, finally. i'll PM some time tomorrow
Likes For thook:
#4468
Senior Member
I need a good 1¼" threaded headset. No, that's not a misprint.
Look at this thread if you want to know more:
Look at this thread if you want to know more:
Likes For wesmamyke:
#4469
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,580
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1443 Post(s)
Liked 1,061 Times
in
786 Posts
I’ve got a busted matrix rim with matching front wheel. Front is -unbusted
planning to swap the rear busted rim with an Avenir (don’t want to discuss how I ended up with it…..)
Please let me know if you have either rim available so I can try to make a matching wheel set.
For example- you got a Matrix and I won’t rebuild with the Avenir.
You got an Avenir, I’ll rebuild both.
let me know if you can help.
thanks
If I do it's most likely in a built wheel so that might complicate things.
I will check and LYK.
I'm also searching for a rim: something "econo" but box-section like the Alex DC-19, 700C in silver with 36 (or 32) holes
EDIT: Sorry to say that wheel with the Matrix rim was probably on a Trek I sold some months back, cause my search turned up no such rim.
I'm still looking for the Alex rim noted above but might be an IC-19 that I can use, that's what the decal says on the one I want to match. It may have been replaced by the current DC-19.
Last edited by unworthy1; 12-13-21 at 09:36 PM.
Likes For unworthy1:
#4470
(rhymes with spook)
Join Date: Aug 2009
Location: Winslow, AR
Posts: 2,788
Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 919 Post(s)
Liked 745 Times
in
546 Posts
yeah, mine's the same rim...just a different decal
#4471
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,004
Bikes: Yes, please.
Mentioned: 280 Post(s)
Tagged: 0 Thread(s)
Quoted: 2198 Post(s)
Liked 4,600 Times
in
1,764 Posts
#4472
Newbie
ISO / Wanted: Shimano 600 / Tri - Color / SL- 6400 downtube shifters for 7 speed.
I don't need the bases.
They don't need to be cosmetically pretty, but they do need to work properly. I'd appreciate a pic or two of what you have available.
I have some stuff to trade, $$ if that's what you'd like, etc.
Shipping to NC 28806
Thanks!
Example pics (from VeloBase):
I don't need the bases.
They don't need to be cosmetically pretty, but they do need to work properly. I'd appreciate a pic or two of what you have available.
I have some stuff to trade, $$ if that's what you'd like, etc.
Shipping to NC 28806
Thanks!
Example pics (from VeloBase):
Shimano SL-A453, Sport LX - 7 Speed - SIS
https://velobase.com/ViewComponent.a...12123&Enum=104
#4473
Newbie
#4474
Senior Member
ISO a Shimano 9-speed DT shifter. Ok with most anything non-DA, otherwise not picky. Don't need FD shifter.
ISO two aero brake levers. A disc front and V-brake rear, or possibly the adapters that allow standard-pull caliper levers to work with disc/V-brakes.
ISO two aero brake levers. A disc front and V-brake rear, or possibly the adapters that allow standard-pull caliper levers to work with disc/V-brakes.
Likes For degan:
#4475
(rhymes with spook)
Join Date: Aug 2009
Location: Winslow, AR
Posts: 2,788
Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 919 Post(s)
Liked 745 Times
in
546 Posts
edit: Couldn't find them in a quick search, but I know they're in a parts baggy with some LX canti's I was going to trade with another member a while back. I remember, though, they are 600's. Just not sure on the speed, yet
Last edited by thook; 12-15-21 at 12:02 AM.