Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Show us your mixte (mhendricks' new happy place)

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Show us your mixte (mhendricks' new happy place)

Old 07-22-15, 03:47 PM
  #1151  
Barrettscv 
Have bike, will travel
 
Barrettscv's Avatar
 
Join Date: Feb 2006
Location: Lake Geneva, WI
Posts: 12,295

Bikes: Ridley Helium SLX, Canyon Endurance SL, De Rosa Professional, Eddy Merckx Corsa Extra, Schwinn Paramount (1 painted, 1 chrome), Peugeot PX10, Serotta Nova X, Simoncini Cyclocross Special, Raleigh Roker, Pedal Force CG2 and CX2

Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 864 Post(s)
Liked 210 Times in 113 Posts
My daughter is a cycling commuter and a weekend cyclist. She will take a bike tour in Europe this summer and plans to Ride the Katy Trail the next time she visits my wife and I in Edwardsville, Illinois

I decided to build up a vintage Mixte for her to use while touring and riding locally while visiting. I found a 1978ish Nishiki Olympic in good condition. the bike had clearly been idle for many years. It was not ready to ride and I decided to convert almost every component to improve its overall performance.

The heavy 27 inch steel rimmed wheels were replaced with 700c touring wheels from a Miyata 615. The replacement wheels include 36 spokes on the front and 40 spokes at the rear. The Belgium made Elesa alloy rims are 23mm wide and the Japanese Sansin hubs are ideal for touring. I installed 700x32 Continental Touring Plus. The bike could accept a larger tire, including most 700x35 and some 700x38.

The Dia-Compe center pull brakes were replaced with new Tektro long reach caliper brakes. The drop bars were replaced with Trekking bars and the bar-end shifters were replaced by new Shimano 3x7 speed ST-EF65 Shifter brake levers. I sourced the 4 finger version of the which can be used on both V-brakes and road bike brakes. New Shimano Altus front and rear derailleurs were installed.

The standard double crank was replaced with a Shimano Deore LX triple crankset with 46, 36 and 24 chainrings. The 5 speed cogset was replaced with a 13-28 seven speed cogset.

The bike should be ideal for touring and gravel trail. It should earn me a few style points with my daughter, too.












Last edited by Barrettscv; 07-23-15 at 08:19 AM.
Barrettscv is offline  
Old 07-22-15, 07:58 PM
  #1152  
Velocivixen
Senior Member
 
Velocivixen's Avatar
 
Join Date: Oct 2013
Location: The Great Pacific Northwest
Posts: 4,515
Mentioned: 87 Post(s)
Tagged: 0 Thread(s)
Quoted: 398 Post(s)
Liked 24 Times in 19 Posts
@Barrettscv - nice build up. Did you have to use spacers are spread the rear triangle? I tried putting a 7 speed in my 6 speed mixte & the chain rubbed on the seat stay or maybe the "top tube" that extends back.
Velocivixen is offline  
Old 07-23-15, 07:25 AM
  #1153  
Barrettscv 
Have bike, will travel
 
Barrettscv's Avatar
 
Join Date: Feb 2006
Location: Lake Geneva, WI
Posts: 12,295

Bikes: Ridley Helium SLX, Canyon Endurance SL, De Rosa Professional, Eddy Merckx Corsa Extra, Schwinn Paramount (1 painted, 1 chrome), Peugeot PX10, Serotta Nova X, Simoncini Cyclocross Special, Raleigh Roker, Pedal Force CG2 and CX2

Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 864 Post(s)
Liked 210 Times in 113 Posts
Originally Posted by Velocivixen View Post
@Barrettscv - nice build up. Did you have to use spacers are spread the rear triangle? I tried putting a 7 speed in my 6 speed mixte & the chain rubbed on the seat stay or maybe the "top tube" that extends back.
Hi,

I was fortunate to be able to fit a seven speed 13-28 freewheel on this frame. The long top-tube that runs diagonal from the rear drop-out to the top of the headtube normally interferes with the chain on the smaller cogs when 6 or more cogs are used. This bike has a curved top-tube, just ahead of the drop-out, that provides just enough space for a seven speed 13-28 freewheel on a 126mm wide rear hub.

Fitting a 130mm hub with an 8 speed 11-32 cassette might work and adding a spacer to the drive side might be needed.

Not all Mixties have the geometry near the rear dropout to allow wider cogsets.

__________________
When I ride my bike I feel free and happy and strong. I'm liberated from the usual nonsense of day to day life. Solid, dependable, silent, my bike is my horse, my fighter jet, my island, my friend. Together we will conquer that hill and thereafter the world.

Last edited by Barrettscv; 12-10-15 at 12:52 PM.
Barrettscv is offline  
Old 09-10-15, 07:35 AM
  #1154  
FNS32
Senior Member
 
Join Date: Sep 2015
Posts: 52
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Liked 1 Time in 1 Post
Heres a Fuji I built up last winter for my daughter
Attached Images
FNS32 is offline  
Old 09-11-15, 09:53 AM
  #1155  
dr1445
Senior Member
 
Join Date: Nov 2009
Location: Broad Brook CT
Posts: 549

Bikes: jamis 2002 komodo, univega aplina uno, miele toscana 300, 1972 puch brigadier, Marin Sausalito

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 18 Post(s)
Likes: 0
Liked 16 Times in 12 Posts


my fuji espree with valite db tubes. i am building it for when i have trouble swinging a leg over a diamond frame. i went with flat bars, triple crank with friction shift, 8 speed cassette with trigger shifter, tiagra hubs with sun cr-18 700c rims, sapim racer spokes and vittoria zafirro 28mm folding tires. right now it is 25.8 pounds on the bathroom scale.
dr1445 is offline  
Old 09-20-15, 10:53 AM
  #1156  
juls
over the hill
 
juls's Avatar
 
Join Date: Apr 2009
Location: florida
Posts: 1,410

Bikes: 72 maino-76 austro daimler inter 10-? giant kronos

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 84 Post(s)
Likes: 0
Liked 3 Times in 3 Posts
Been away awhile-my AD Inter 101976
Attached Images
File Type: jpg
Photo-0520.jpg (99.6 KB, 234 views)
File Type: jpg
Photo-0523.jpg (94.7 KB, 459 views)
File Type: jpg
Photo-0522.jpg (90.6 KB, 455 views)
juls is offline  
Old 09-30-15, 11:04 PM
  #1157  
warhound
Junior Member
 
Join Date: Jun 2007
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Found a little gem in a sale. Didn't know the frame style is called Mixte until did some research...
It's a Healing 10+2 Turbo from the early 80s. Frame and fork manufactured in New Zealand with mostly Shimano running gear. 27 inch wheel that turn nicely, but probably be hard to find some good tyres for. The first gen Uniglide freehub isn't really free at all and will need some love too.
Not really a classic I guess, but planning to strip the frame and repaint the frame just for the sake of it. Any ideas for a nice rebuild?

Attached Images
File Type: jpg
IMG_20150920_121108.jpg (105.1 KB, 474 views)
warhound is offline  
Old 12-10-15, 10:57 AM
  #1158  
browngw 
Senior Member
 
browngw's Avatar
 
Join Date: Mar 2012
Location: Port Dover Ontario Canada
Posts: 1,454

Bikes: 1965 Dilecta Le Blanc, 1956 Royal Nord, 1971 Robin Hood Sports, 1972 CCM Turismo,1976 SuperCycle Excalibur, 2014 Salsa Vaya, 2017 Felt DD70, 2019 Giant Lafree and others

Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 315 Post(s)
Liked 294 Times in 149 Posts
Barn Find CCM Mixte

Saw this one along the road beside a storage barn. After a year or so I finally got in touch with the owner and purchased it for $30. It appears to be a circa 1977 CCM Targa 10 19.5" frame with a "Positron" RD. Someone has tried to convert it to a single cable, it does not work. The frame is straight and will hopefully receive the 27" alloy wheels I bought a while ago.

Attached Images
File Type: jpg
DSCF2872.jpg (89.1 KB, 502 views)
File Type: jpg
DSCF2875.jpg (86.4 KB, 497 views)
File Type: jpg
DSCF2876.jpg (84.8 KB, 494 views)
File Type: jpg
DSCF2881.jpg (86.6 KB, 495 views)
File Type: jpg
DSCF2883.jpg (94.8 KB, 497 views)
File Type: jpg
DSCF2884.jpg (91.0 KB, 494 views)
__________________
We are what we reflect. We are the changes that we bring to this world. Ride often. -Geo.-
browngw is offline  
Old 12-10-15, 02:44 PM
  #1159  
Velocivixen
Senior Member
 
Velocivixen's Avatar
 
Join Date: Oct 2013
Location: The Great Pacific Northwest
Posts: 4,515
Mentioned: 87 Post(s)
Tagged: 0 Thread(s)
Quoted: 398 Post(s)
Liked 24 Times in 19 Posts
Originally Posted by browngw View Post
Saw this one along the road beside a storage barn. After a year or so I finally got in touch with the owner and purchased it for $30. It appears to be a circa 1977 CCM Targa 10 19.5" frame with a "Positron" RD. Someone has tried to convert it to a single cable, it does not work. The frame is straight and will hopefully receive the 27" alloy wheels I bought a while ago.



I hope you post photos along the way with your progress. I love mixtes and have 2 myself. Yours is a cool old bike.
Velocivixen is offline  
Old 12-10-15, 02:55 PM
  #1160  
Drillium Dude 
Gone riding
 
Drillium Dude's Avatar
 
Join Date: Jul 2009
Posts: 11,534
Mentioned: 238 Post(s)
Tagged: 0 Thread(s)
Quoted: 2137 Post(s)
Liked 3,042 Times in 1,116 Posts
I have no mixte, just stopped in to say I think it's impressive that this thread is over 8 years old and counting

DD
__________________
My Flickr pics: https://www.flickr.com/photos/30331021@N08/

Drillium Dude is offline  
Old 12-10-15, 03:00 PM
  #1161  
3speedslow
Senior Member
 
3speedslow's Avatar
 
Join Date: Oct 2010
Location: Jacksonville, NC
Posts: 9,110

Bikes: A few

Mentioned: 114 Post(s)
Tagged: 0 Thread(s)
Quoted: 1880 Post(s)
Liked 816 Times in 518 Posts
That is a cool headbadge
Attached Images
File Type: jpg
image.jpg (78.6 KB, 448 views)
3speedslow is offline  
Old 12-10-15, 07:25 PM
  #1162  
Insidious C. 
Crash Test Dummy
 
Join Date: Jan 2014
Location: PNW
Posts: 1,394

Bikes: One of everything and three of everything French

Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 373 Post(s)
Liked 203 Times in 126 Posts
Originally Posted by Drillium Dude View Post
I have no mixte, just stopped in to say I think it's impressive that this thread is over 8 years old and counting

DD
You don't want one, either. Trust me- the darn things multiply like rabbits!
__________________
I.C.
Insidious C. is offline  
Old 12-31-15, 04:30 PM
  #1163  
Abazaba
Junior Member
 
Abazaba's Avatar
 
Join Date: Dec 2015
Location: San Diego, CA
Posts: 13

Bikes: '72 Peugeot DA 40 E, '74 Peugeot UO-18 Mint

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
1974 Peugeot UO 18. Bought it from a 90 year old woman in Montana last year...I was the first person to ride it, 40 years later! Time warp.
Attached Images
File Type: jpg
image.jpg (99.4 KB, 483 views)
Abazaba is offline  
Old 12-31-15, 05:13 PM
  #1164  
brianinc-ville
Senior Member
 
brianinc-ville's Avatar
 
Join Date: Nov 2006
Location: Greenville, NC
Posts: 1,352
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 89 Post(s)
Liked 34 Times in 27 Posts
Originally Posted by Abazaba View Post
1974 Peugeot UO 18. Bought it from a 90 year old woman in Montana last year...I was the first person to ride it, 40 years later! Time warp.
Amazing! I came out of the factory that year, too. It was a good one.
brianinc-ville is offline  
Old 12-31-15, 05:36 PM
  #1165  
Abazaba
Junior Member
 
Abazaba's Avatar
 
Join Date: Dec 2015
Location: San Diego, CA
Posts: 13

Bikes: '72 Peugeot DA 40 E, '74 Peugeot UO-18 Mint

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Attached Images
File Type: jpeg
image.jpeg (33.4 KB, 216 views)
Abazaba is offline  
Old 01-01-16, 06:31 PM
  #1166  
DorkDisk
Senior Member
 
Join Date: May 2013
Location: Kips Bay, NY
Posts: 2,063

Bikes: Ritchey Swiss Cross | Teesdale Kona Hot | Haro Extreme | Specialized Stumpjumper Comp | Cannondale F1000 | Shogun 1000 | Cannondale M500 | Norco Charger | Marin Muirwoods 29er | Shogun Kaze | Breezer Lightning

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 523 Post(s)
Liked 770 Times in 406 Posts
Swapped to RF+ 7sp shifters and M735 XT derailleurs for indexing. Will later swap to 7 speed cassette (currently a 5 speed FW)


Last edited by DorkDisk; 04-14-20 at 06:51 PM.
DorkDisk is offline  
Old 01-01-16, 06:38 PM
  #1167  
Velocivixen
Senior Member
 
Velocivixen's Avatar
 
Join Date: Oct 2013
Location: The Great Pacific Northwest
Posts: 4,515
Mentioned: 87 Post(s)
Tagged: 0 Thread(s)
Quoted: 398 Post(s)
Liked 24 Times in 19 Posts
Originally Posted by DorkDisk View Post
Swapped to RF+ 7sp shifters and M735 XT derailleurs for indexing. Will later swap to 7 speed cassette (currently a 5 speed FW)

Im eager to hear about and hope you post about going 7 speed. My two mixtes have 126 dropout and are 6 speed freewheels. A 7 speed freewheel would fit alright, but would rub the center stay in back without a spacer. My understanding is that 5-speeds usually have a 120 mm dropout. Anyway it's a Univega, so all is good.
Velocivixen is offline  
Old 01-01-16, 06:57 PM
  #1168  
DorkDisk
Senior Member
 
Join Date: May 2013
Location: Kips Bay, NY
Posts: 2,063

Bikes: Ritchey Swiss Cross | Teesdale Kona Hot | Haro Extreme | Specialized Stumpjumper Comp | Cannondale F1000 | Shogun 1000 | Cannondale M500 | Norco Charger | Marin Muirwoods 29er | Shogun Kaze | Breezer Lightning

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 523 Post(s)
Liked 770 Times in 406 Posts
Originally Posted by Velocivixen View Post
Im eager to hear about and hope you post about going 7 speed. My two mixtes have 126 dropout and are 6 speed freewheels. A 7 speed freewheel would fit alright, but would rub the center stay in back without a spacer. My understanding is that 5-speeds usually have a 120 mm dropout. Anyway it's a Univega, so all is good.
This one is 126mm and might have come with 6 speeds originally. I suspect this freewheel is a modern one since it indexes so well.

Do you think respreading to 130mm and using an 8sp freehub with 7sp cassette will give the lateral movement necessary for clearance?

Thanks for the heads up on potential issues.
DorkDisk is offline  
Old 01-01-16, 07:06 PM
  #1169  
Velocivixen
Senior Member
 
Velocivixen's Avatar
 
Join Date: Oct 2013
Location: The Great Pacific Northwest
Posts: 4,515
Mentioned: 87 Post(s)
Tagged: 0 Thread(s)
Quoted: 398 Post(s)
Liked 24 Times in 19 Posts
Originally Posted by DorkDisk View Post
This one is 126mm and might have come with 6 speeds originally. I suspect this freewheel is a modern one since it indexes so well.

Do you think respreading to 130mm and using an 8sp freehub with 7sp cassette will give the lateral movement necessary for clearance?

Thanks for the heads up on potential issues.
I'm not sure of the answer to your question, so I'd wait for a more experienced frame person to chime in, or even post the question over on the bike mechanics subforum. You can certainly give it a try & report back.
Velocivixen is offline  
Old 01-01-16, 08:58 PM
  #1170  
thumpism 
Bikes are okay, I guess.
 
thumpism's Avatar
 
Join Date: Jan 2015
Location: Richmond, Virginia
Posts: 8,152

Bikes: Waterford Paramount Touring, Giant CFM-2, Raleigh Sports 3-speeds in M23 & L23, Schwinn Cimarron oddball build, Marin Palisades Trail dropbar conversion, Nishiki Cresta GT

Mentioned: 58 Post(s)
Tagged: 0 Thread(s)
Quoted: 2348 Post(s)
Liked 1,436 Times in 1,022 Posts
I found this Berseau-style Chiorda mixte in '83 and built it up for my then-girlfriend (now wife of 30 years) as a mountain bike. Custom paint by Marinoni, cruiser fork and drum brakes. Not a terrific mountain bike but a totally cool little two wheeler.
Attached Images
File Type: jpg
Ramona1.JPG (76.9 KB, 567 views)
thumpism is offline  
Old 01-02-16, 11:53 PM
  #1171  
CuttersRidge
Senior Member
 
CuttersRidge's Avatar
 
Join Date: Oct 2007
Location: NM & MN
Posts: 1,061
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 94 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by browngw View Post
Saw this one along the road beside a storage barn. After a year or so I finally got in touch with the owner and purchased it for $30. It appears to be a circa 1977 CCM Targa 10 19.5" frame with a "Positron" RD. Someone has tried to convert it to a single cable, it does not work. The frame is straight and will hopefully receive the 27" alloy wheels I bought a while ago.

Nice, I have a CCM bike, but yours has very nice aesthetics to it, that head badge and frame color is very suave. https://www.vintageccm.com/

Edit On: There is a dedicated CCM website with forums, I have heard of this bike from reading over there.

Last edited by CuttersRidge; 01-02-16 at 11:56 PM.
CuttersRidge is offline  
Old 01-03-16, 06:08 PM
  #1172  
Teamdarb
Senior Member
 
Teamdarb's Avatar
 
Join Date: Oct 2012
Location: Washington DC
Posts: 83

Bikes: 94' Barracuda A2M, 83 Ross 294 signature, 93 MB3, '87 BS 300 mixte, '86 420, '12 Trek 520, 92 720 and more

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 4 Times in 3 Posts

1987 300 sport touring Bridgestone
Attached Images
File Type: jpg
image.jpg (89.3 KB, 513 views)

Last edited by Teamdarb; 01-03-16 at 07:13 PM.
Teamdarb is offline  
Old 01-03-16, 06:19 PM
  #1173  
bargainguy
Senior Member
 
bargainguy's Avatar
 
Join Date: Sep 2012
Location: Trekland
Posts: 2,070
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 430 Post(s)
Liked 137 Times in 91 Posts


Late 80's/early 90's Univega Via Carisma mixte. I originally picked up this bike with the intention of stripping the barend shifters, replacing them with something else, refurbing the bike and selling the barends separately at a swap.

But once I got the bike rideable, I couldn't bring myself to split up the combo of rando bars and barends. A really sweet ride, much more so than I would have anticipated. Still have this bike, plan to take it to a swap next week if I have room.
Attached Images
File Type: jpg
19u1.jpg (92.9 KB, 531 views)
File Type: jpg
19u2.jpg (93.9 KB, 530 views)
File Type: jpg
19u5.jpg (86.4 KB, 518 views)
bargainguy is online now  
Old 01-03-16, 07:14 PM
  #1174  
Teamdarb
Senior Member
 
Teamdarb's Avatar
 
Join Date: Oct 2012
Location: Washington DC
Posts: 83

Bikes: 94' Barracuda A2M, 83 Ross 294 signature, 93 MB3, '87 BS 300 mixte, '86 420, '12 Trek 520, 92 720 and more

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 4 Times in 3 Posts
And where would that be?..... Cough cough
Teamdarb is offline  
Old 01-03-16, 09:52 PM
  #1175  
bargainguy
Senior Member
 
bargainguy's Avatar
 
Join Date: Sep 2012
Location: Trekland
Posts: 2,070
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 430 Post(s)
Liked 137 Times in 91 Posts
That would be the Brazen Dropouts swap meet at the Alliance Center in Madison, WI. Biggest one in the midwest as far as I know.

Swap Info ? Brazen Dropouts
bargainguy is online now  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.