Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Classic & Vintage Subforum Newbie

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Classic & Vintage Subforum Newbie

Old 06-06-21, 09:12 PM
  #1  
Jacob_R_59 
Junior Member
Thread Starter
 
Jacob_R_59's Avatar
 
Join Date: Jun 2021
Location: Renton, Washington
Posts: 96

Bikes: 2000 Serotta Hors Categorie, 1990s Lennard Zinn, 1985 Guerciotti Jet, 1975 Peugeot PX-10,

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 118 Times in 30 Posts
Classic & Vintage Subforum Newbie

I hope that French bikes and components get some love on this Subforums. A lot of people tend to get irrationally upset about the shortcomings of French components.

Of course, when I remember the need to remove the drive side cones of an Normandy hub to take off the freewheel, they have a point…
Jacob_R_59 is offline  
Old 06-07-21, 04:35 AM
  #2  
Murray Missile 
Senior Member
 
Murray Missile's Avatar
 
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,205

Bikes: More than there were awhile ago.

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 620 Post(s)
Liked 1,205 Times in 575 Posts
Welcome to the "rabbit hole"....... I only recently took the first steps in conquering my "Francovelophobia" by jumping in head first and buying a '72-ish Gitane Interclub, a '73 Gitane TdF frameset, a '77 Peugeot PR 10 frameset, a 1980-ish PKN10 and a 1981 PXN10 over the past few months. Go big or go home as they say.
__________________
".....distasteful and easily triggered."
Murray Missile is offline  
Likes For Murray Missile:
Old 06-07-21, 07:43 AM
  #3  
johnnyace 
Le savonnier
 
johnnyace's Avatar
 
Join Date: Sep 2016
Location: Oregon
Posts: 1,706

Bikes: I can count 'em on one hand

Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 729 Post(s)
Liked 597 Times in 269 Posts
Welcome! There's plenty of love (and probably plenty of hate!) for vintage French bikes around here. And plenty of knowledge. I have owned a 1972 Gitane Tour de France, and currently own two Peugeots: a 1972 (possibly later) PX10 and a 1986 PXR80. They are great bikes.
johnnyace is offline  
Old 06-07-21, 08:00 AM
  #4  
BFisher
Senior Member
 
Join Date: Aug 2013
Posts: 2,336
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 767 Post(s)
Liked 1,897 Times in 889 Posts
Did someone say French bikes?


Welcome, Jacob. Thanks for coming along and for bringing up the topic, which has inspired me to ride this one today.
BFisher is offline  
Likes For BFisher:
Old 06-07-21, 08:02 AM
  #5  
rustystrings61 
Senior Member
 
Join Date: May 2013
Location: Greenwood SC USA
Posts: 2,340

Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1973 Raleigh Competition, 1971 Gitane Tour de France and others

Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 822 Post(s)
Liked 1,387 Times in 690 Posts
French bikes of all types are fascinating to me. I've been through my phase of lovingly restoring old PX-10s, to riding PX-10s that look like they survived Verdun, to learning to love old French cheapies. Among those of us who know, you'll run into the expression "The French have a way with gaspipe," because they DID. I had a wonderful summer a couple of years back riding a c.1972 Liberia built up with 27-in wheels during the crush of the bike boom - it was really meant for 700C and you really can't put the rear wheel in with an inflated tire! I also have enjoyed the battered Mercier 200 with a mishmash of parts that, after straightening the crash-bent frame, has also turned out to be a cool bike.

Ah, but my favorite French bike yet remains the weathered c.1971 Gitane TdF I bought as a frameset with headset and BB. That one has been my primary early morning beater bike for many years now, and remains the first choice for vacations and first-light-of-day rides. I remain convinced that metric gauge Reynolds 531 is just a touch springier, though I am sure it's all in my head.
rustystrings61 is offline  
Likes For rustystrings61:
Old 06-07-21, 08:09 AM
  #6  
johnnyace 
Le savonnier
 
johnnyace's Avatar
 
Join Date: Sep 2016
Location: Oregon
Posts: 1,706

Bikes: I can count 'em on one hand

Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 729 Post(s)
Liked 597 Times in 269 Posts
Originally Posted by rustystrings61
I remain convinced that metric gauge Reynolds 531 is just a touch springier, though I am sure it's all in my head.
I don't believe this is all in your head. I have experienced this as well, and so have many others.
johnnyace is offline  
Old 06-07-21, 09:27 AM
  #7  
BikingViking793 
Senior Member
 
Join Date: Aug 2017
Location: Wisconsin
Posts: 527

Bikes: 2015 Felt Z75 Disc, 2008 Fuji Cross Comp, 2010 Trek Navigator 1.0, 1974 Raleigh Sports, 1974 Schwinn Le Tour, 1981 Schwinn Super Le Tour, Surly Cross Check, 2021 Giant Talon 2

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 202 Post(s)
Liked 71 Times in 60 Posts
Originally Posted by Jacob_R_59
I hope that French bikes and components get some love on this Subforums. A lot of people tend to get irrationally upset about the shortcomings of French components.

Of course, when I remember the need to remove the drive side cones of an Normandy hub to take off the freewheel, they have a point…
i like most all bikes. Have pictures of one to share?
__________________
check out the Frugal Average Bicyclist
Frugal Average Bicyclist – The goal here is to help you keep cycling on a budget.
BikingViking793 is offline  
Old 06-07-21, 09:46 AM
  #8  
northbend 
Senior Member
 
northbend's Avatar
 
Join Date: Mar 2008
Location: North Bend, Washington State
Posts: 2,938

Bikes: 1937 Hobbs; 1977 Bruce Gordon; 1987 Bill Holland; 1988 Schwinn Paramount (Fixed gear); 1999 Fat City Yo Eddy (MTB); 2018 Woodrup (Touring) 2016 Ritchey breakaway

Mentioned: 291 Post(s)
Tagged: 0 Thread(s)
Quoted: 551 Post(s)
Liked 3,771 Times in 664 Posts
Originally Posted by Drillium Dude


DD
You may have not known it but you've been a part of this forum for a while :-)
Welcome to the forum, @Jacob_R_59!

Matt
northbend is offline  
Likes For northbend:
Old 06-07-21, 10:07 AM
  #9  
randyjawa 
Senior Member
 
randyjawa's Avatar
 
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,672

Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma

Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1370 Post(s)
Likes: 0
Liked 1,743 Times in 934 Posts
First, though I do not have one at the moment, I am a fan of vintage French bicycles, having owned, restored and ridden Peugeot, Jeunet, Motobecane, LeJeune and... My favorite had to be either my Peugeot PX10...


Or my Motobecane Grand Jubilee...


As for this comment - "A lot of people tend to get irrationally upset about the shortcomings of French components." There is nothing irrational about being upset with this sort of thing...

__________________
"98% of the bikes I buy are projects".
randyjawa is offline  
Likes For randyjawa:
Old 06-07-21, 10:49 AM
  #10  
repechage
Senior Member
 
Join Date: Jun 2006
Posts: 20,320
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 3449 Post(s)
Liked 2,800 Times in 1,974 Posts
Originally Posted by randyjawa
First, though I do not have one at the moment, I am a fan of vintage French bicycles, having owned, restored and ridden Peugeot, Jeunet, Motobecane, LeJeune and... My favorite had to be either my Peugeot PX10...


Or my Motobecane Grand Jubilee...


As for this comment - "A lot of people tend to get irrationally upset about the shortcomings of French components." There is nothing irrational about being upset with this sort of thing...

someone needs to 3D print a replacement front mechanism body for those explosive Simplex mechanisms.


I own 10 French bicycles, Not Afraid.
repechage is offline  
Old 06-07-21, 07:40 PM
  #11  
ollo_ollo
Senior Member
 
ollo_ollo's Avatar
 
Join Date: Nov 2003
Location: Soviet of Oregon or Pensacola FL
Posts: 5,337

Bikes: Still have a few left!

Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 462 Post(s)
Liked 496 Times in 253 Posts
Welcome Francophile, I have 9 or 10 myself, I lose count, but if I can pull it off, there will be another soon. More later. Don
ollo_ollo is online now  
Old 06-07-21, 08:16 PM
  #12  
Flatforkcrown
Full Member
 
Flatforkcrown's Avatar
 
Join Date: Jun 2021
Location: Barboursville, Va
Posts: 289

Bikes: N+1

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 94 Post(s)
Liked 417 Times in 159 Posts
New here too, and if not in love, intrigued, with French components. The stronglight 93 cranks are some of the most beautiful. I want to try a jubilee rear derailer. The metric 531 on my 73 le champion makes for a beautiful ride… but it can be a pain.
Flatforkcrown is offline  
Old 06-09-21, 09:05 PM
  #13  
tgot 
Full Member
 
Join Date: Jan 2009
Location: SF Peninsula
Posts: 443

Bikes: 1986 Centurion Ironman, 1997 Trek 2120, Trek T1000

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 137 Post(s)
Liked 203 Times in 116 Posts
Originally Posted by randyjawa
First, though I do not have one at the moment, I am a fan of vintage French bicycles, having owned, restored and ridden Peugeot, Jeunet, Motobecane, LeJeune and... My favorite had to be either my Peugeot PX10...


Or my Motobecane Grand Jubilee...


As for this comment - "A lot of people tend to get irrationally upset about the shortcomings of French components." There is nothing irrational about being upset with this sort of thing...

The copper wire looks great! 10 gauge Romex?
tgot is offline  
Likes For tgot:
Old 06-09-21, 09:37 PM
  #14  
Chuck M 
Happy With My Bikes
 
Chuck M's Avatar
 
Join Date: Sep 2020
Location: Oklahoma
Posts: 2,185

Bikes: Hi-Ten bike boomers, a Trek Domane and some projects

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 867 Post(s)
Liked 2,277 Times in 1,099 Posts
Welcome to C&V. There is an entry level U08 survivor local to me and a bit too tall that I want to love enough to rescue just because. The seller started at $200 and is now at $50 and I'm at $35. I'm thinking it will be in my garage this weekend and I'll be $50 poorer.
__________________
"It is the unknown around the corner that turns my wheels." -- Heinz Stücke

Chuck M is offline  
Likes For Chuck M:
Old 06-09-21, 10:20 PM
  #15  
Flatforkcrown
Full Member
 
Flatforkcrown's Avatar
 
Join Date: Jun 2021
Location: Barboursville, Va
Posts: 289

Bikes: N+1

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 94 Post(s)
Liked 417 Times in 159 Posts
Welcome. I definitely like my French bike.

Flatforkcrown is offline  
Old 06-10-21, 05:09 PM
  #16  
johnnyace 
Le savonnier
 
johnnyace's Avatar
 
Join Date: Sep 2016
Location: Oregon
Posts: 1,706

Bikes: I can count 'em on one hand

Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 729 Post(s)
Liked 597 Times in 269 Posts
Added another French bike today, 1970s Liberia with 90s Sachs-Huret levers/shifters, derailleurs, and crankset. Had a moment of panic thinking I had bought yet another 70s French bike without water bottle braze-ons, but no, it has one. (I know that can be overcome in a variety of ways, but I'm kinda OCD when it comes to these things.)

johnnyace is offline  
Likes For johnnyace:
Old 06-10-21, 08:45 PM
  #17  
Gashouse
Newbie
 
Join Date: May 2021
Location: New Jersey
Posts: 16

Bikes: 1981 Schwinn, 1964 Frejus , 1972 Peugeot PX 10

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 13 Times in 7 Posts
New French convert

One third of my collection is French, now.
I picked up a Peugeot PX-10 a month ago.
I am already a third of the way to getting it back on the road.
I did not think I wanted a French bike until I saw so many posts on
this forum. I'll find out what the fuss is about later this summer.
Gashouse is offline  
Old 06-10-21, 09:25 PM
  #18  
johnnyace 
Le savonnier
 
johnnyace's Avatar
 
Join Date: Sep 2016
Location: Oregon
Posts: 1,706

Bikes: I can count 'em on one hand

Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 729 Post(s)
Liked 597 Times in 269 Posts
Originally Posted by Gashouse
One third of my collection is French, now.
I picked up a Peugeot PX-10 a month ago.
I am already a third of the way to getting it back on the road.
I did not think I wanted a French bike until I saw so many posts on
this forum. I'll find out what the fuss is about later this summer.
Reading your post made me realize that my collection is now 3/4 French bikes. Never would have figured that.
johnnyace is offline  
Old 06-10-21, 09:34 PM
  #19  
bikemig 
Senior Member
 
bikemig's Avatar
 
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,505

Bikes: A bunch of old bikes and a few new ones

Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5877 Post(s)
Liked 3,445 Times in 2,066 Posts
Originally Posted by Jacob_R_59
I hope that French bikes and components get some love on this Subforums. A lot of people tend to get irrationally upset about the shortcomings of French components.

Of course, when I remember the need to remove the drive side cones of an Normandy hub to take off the freewheel, they have a point…
Im a fan of French bikes as well. I started this thread, https://www.bikeforums.net/classic-v...nch-bikes.html
bikemig is offline  
Likes For bikemig:
Old 06-10-21, 10:28 PM
  #20  
johnnyace 
Le savonnier
 
johnnyace's Avatar
 
Join Date: Sep 2016
Location: Oregon
Posts: 1,706

Bikes: I can count 'em on one hand

Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 729 Post(s)
Liked 597 Times in 269 Posts
Originally Posted by bikemig
Im a fan of French bikes as well. I started this thread, https://www.bikeforums.net/classic-v...nch-bikes.html
Oh man, thanks for linking to that thread, I just re-read it all again. That was fun.
johnnyace is offline  
Old 06-11-21, 12:12 AM
  #21  
Andy_K 
Senior Member
 
Andy_K's Avatar
 
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,787

Bikes: Yes

Mentioned: 522 Post(s)
Tagged: 0 Thread(s)
Quoted: 3228 Post(s)
Liked 3,853 Times in 1,436 Posts
Welcome to the forum, Jacob!

I try to keep my French bike habit under control. I've only got four at the moment.

I think you may have seen this one before.

__________________
My Bikes
Andy_K is offline  
Likes For Andy_K:
Old 06-11-21, 08:34 AM
  #22  
ollo_ollo
Senior Member
 
ollo_ollo's Avatar
 
Join Date: Nov 2003
Location: Soviet of Oregon or Pensacola FL
Posts: 5,337

Bikes: Still have a few left!

Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 462 Post(s)
Liked 496 Times in 253 Posts
So, you see there are many admirers of "The Beautiful French" in C&V:
One of my long sought, grail bikes was French, and somewhat special in that I could restore it and legitimately place Peugeot, Motobecane, Gitane, Mercier, Bertin or even a few other marquis' decals upon it. I did not seriously expect to ever own one, but recently found that there were some out there for very reasonable prices, and through a serendipitous chain of circumstances, found and purchased "just 1 more French Bike" as i told my wife. If you haven't guessed by now, I speak of the Vitus 979. This Wednesday, I picked her up. Pics will have to wait my return, since my phone aversion makes me hopelessly unable to use its capabilities and i left my camera behind. Don

Last edited by ollo_ollo; 06-11-21 at 08:47 AM. Reason: spelling
ollo_ollo is online now  
Old 06-11-21, 09:15 AM
  #23  
Jacob_R_59 
Junior Member
Thread Starter
 
Jacob_R_59's Avatar
 
Join Date: Jun 2021
Location: Renton, Washington
Posts: 96

Bikes: 2000 Serotta Hors Categorie, 1990s Lennard Zinn, 1985 Guerciotti Jet, 1975 Peugeot PX-10,

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 118 Times in 30 Posts
French Bikes

Hello and thank you for all the answers! My experience with French bikes is as mixed the comments here.

My 1966 PX-10 (my first of 3) had a failing and then broken seat tube, which explained the “lack of urgency” that accompanied out-of-the saddle efforts…

French components are one thing and French frames quite another. Big frames, and for me a “big” frame (actually a normal sized one) is 66cm and up. They are hard to find! Why?

A friend opined that most of France’s taller men were killed in World War 2 so there was less need for large frames. I don’t know anything about post War French bike production. The largest French frames I’ve seen were a 67cm Bertin C-35 on the Bertin Wordpress website and a 66cm Alex Singer that a friend offered me at a time when I was broke 🤢.

I have a 65cm circa 1969 Bertin C-37 “project” frame and a 1975 PX-10LE. The LE was one model above the iconic “standard” PX-10 with the black Nervex lugs and had plain Nervex lugs painted white like the rest of the frame. I bought it because of the 60cm top tube, the longest I’ve seen so far on a French bike.

Thanks for all of you who’ve taken the time to reply here. Maybe I’ll start another thread about Simplex Delfin derailleurs…

🤡
Jacob_R_59 is offline  
Old 06-11-21, 09:43 AM
  #24  
John E
feros ferio
 
John E's Avatar
 
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,764

Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;

Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1384 Post(s)
Liked 1,293 Times in 819 Posts
I have owned three Frenchies, the first and oldest of which I still have.

I retired the 1973 UO-8 when the chainstay cracked between the chainring and tire dimples, and I gave my beloved 1980 PKN-10 to my elder son, because it was one size too long and too tall for me. I still have the 1970 UO-8 I bought as a bare frame when I worked at a Peugeot/Nishiki dealership. To be fair, I have used a lot of Japanese driveline components, although the PKN-10 still has Simplex derailleurs.

My old PKN-10, now my son's kiddie-puller, although the boys are getting big for the trailer now.

My UO-8 with barcon cables routed between the rack and the cylindrical Bellwether front bag.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
John E is offline  
Old 06-11-21, 09:52 AM
  #25  
gugie 
Bike Butcher of Portland
 
gugie's Avatar
 
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,638

Bikes: It's complicated.

Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4667 Post(s)
Liked 5,765 Times in 2,270 Posts
Originally Posted by Jacob_R_59
I hope that French bikes and components get some love on this Subforums. A lot of people tend to get irrationally upset about the shortcomings of French components.

Of course, when I remember the need to remove the drive side cones of an Normandy hub to take off the freewheel, they have a point…
Hi Jacob!

Good to see you’re testing the waters here at the dive bar after spending so much time at wine bar (CR).

I try to be rationally upset at French components.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
gugie is offline  
Likes For gugie:

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.