Titanium Square Taper BB : 68 X 125 mm, 1.37″ x 24 (English)
#1
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
Titanium Square Taper BB : 68 X 125 mm, 1.37″ x 24 (English)
PLEASE NOTE: First photo shows the bottom bracket with bearings installed onto the spindle. This sale does not include bearings. You will need to source your own bearings. I repeat... BEARINGS NOT INCLUDED.
-- -- --
Purchased new from an ebay seller who has an assortment of NOS weight weenie components. Unsure of this BB's manufacturer, but its claimed to be vintage & made in the USA.
This was a recent purchase that did not work out for the intended application. Turned out to be a tad too long regardless of the substantial left/right right/left adjustability that the cups allow for
I installed it once into the bb shell with LOKTITE TI prep, and mounted a crankset to it. Once I determined that I could not achieve the chainline I needed, I dissambled the parts, and cleaned them as best as could. There is still a bit of TI prep embedded along the cup threads.
This bottom bracket has never seen the road.
-- -- --
SPINDLE:
• 6AI-4V Titanium
• Nonspecified/Unidentified sqaure taper (symmetrical)
• 125.37 mm length end to end
• 56 mm between outside of bearing shoulders
• 28.3 mm from taper end to outside bearing
CUPS:
• Billet 7075-T6 Aluminum
• English threads
• 14.3 mm deep
• Aluminum non-driveside lockring
• Stainless steel driveside lockring
Bottom bracket is spec'd for standard 17 mm x 7 mm x 30 mm cartridge bearings
121 grams total weight w/o bearings
-- -- --
$45 shipped SOLD
PayPal f&f or add 3% for g&s
-- -- --
Purchased new from an ebay seller who has an assortment of NOS weight weenie components. Unsure of this BB's manufacturer, but its claimed to be vintage & made in the USA.
This was a recent purchase that did not work out for the intended application. Turned out to be a tad too long regardless of the substantial left/right right/left adjustability that the cups allow for
I installed it once into the bb shell with LOKTITE TI prep, and mounted a crankset to it. Once I determined that I could not achieve the chainline I needed, I dissambled the parts, and cleaned them as best as could. There is still a bit of TI prep embedded along the cup threads.
This bottom bracket has never seen the road.
-- -- --
SPINDLE:
• 6AI-4V Titanium
• Nonspecified/Unidentified sqaure taper (symmetrical)
• 125.37 mm length end to end
• 56 mm between outside of bearing shoulders
• 28.3 mm from taper end to outside bearing
CUPS:
• Billet 7075-T6 Aluminum
• English threads
• 14.3 mm deep
• Aluminum non-driveside lockring
• Stainless steel driveside lockring
Bottom bracket is spec'd for standard 17 mm x 7 mm x 30 mm cartridge bearings
121 grams total weight w/o bearings
-- -- --
PayPal f&f or add 3% for g&s
Last edited by deux jambes; 09-26-21 at 10:51 AM.
#2
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
As I was taking pics to document a build thread, I was excited to incorporate this bb. Maybe it'll fit your application better than it did mine. Remember, there will be no bearings included in the sale of this part.
Last edited by deux jambes; 09-21-21 at 01:11 PM.
#4
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
I've got no need for this bb and probably never will. Help me get it outta here and into your parts bin or build project.
Dropping the price to 👇
$45 shipped SOLD
Dropping the price to 👇
Last edited by deux jambes; 09-26-21 at 10:52 AM.
#5
Senior Member
Join Date: Nov 2015
Posts: 4,473
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 1635 Post(s)
Likes: 0
Liked 823 Times
in
532 Posts
Curious,....why not sell the bearings with the cups and spindle?.....
__________________
72 Line Seeker
83 Davidson Signature
84 Peugeot PSV
84 Peugeot PY10FC
84 Gitane Tour de France.
85 Vitus Plus Carbone 7
86 ALAN Record Carbonio
86 Medici Aerodynamic (Project)
88 Pinarello Montello
89 Bottecchia Professional Chorus SL
95 Trek 5500 OCLV (Project)
72 Line Seeker
83 Davidson Signature
84 Peugeot PSV
84 Peugeot PY10FC
84 Gitane Tour de France.
85 Vitus Plus Carbone 7
86 ALAN Record Carbonio
86 Medici Aerodynamic (Project)
88 Pinarello Montello
89 Bottecchia Professional Chorus SL
95 Trek 5500 OCLV (Project)
#6
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
Because the cups and spindle didn't come with bearings and I needrd them for the bb that I chose to use after finding out this one wouldn't work. Didn't really have another 20 bucks to throw at a second set of Enduros.
I think that I'm still offering a fair deal, considering...
I think that I'm still offering a fair deal, considering...
Last edited by deux jambes; 09-25-21 at 03:07 PM.