Shipping Reference Guide: For the weird items
#1
Edumacator
Thread Starter
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,371
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 2374 Post(s)
Liked 2,894 Times
in
1,842 Posts
Shipping Reference Guide: For the weird items
I think most folks have shipped things using the Priority mail boxes, but for those items that are somewhat odd, perhaps a reference guide for peeps...I would happily update the first post as people add items as best as I can.
Mostly, for me, how do you ship handlebars and a fork most cheaply...? But others might benefit from the group.
--------------------------------------------------------------------------------------------------------
22" frame and under (31X 30 X 8)
22 and over...good luck.
--I shipped two in a box to Mad Honk that were 62cm and 54cm. I think it was 50X32X9 or 10
--25" Trek sent to Gary12000 ...cannot remember.
----------------------------------------------------------------------------------------------------
Wheels
--If pastorbobnlnh happens to have kept the box, he might be able to measure the box of a set of wheels that I sent snugly
--Single wheel (29X29X7)
---------------------------------------------------------------------------------------------------
Handle bars
--Straight
--Road drops
----------------------------------------------------------------------------------------------------
Forks
--Short
--Long
----------------------------------------------------------------------------------------------------
Racks
--
Mostly, for me, how do you ship handlebars and a fork most cheaply...? But others might benefit from the group.
--------------------------------------------------------------------------------------------------------
22" frame and under (31X 30 X 8)
22 and over...good luck.
--I shipped two in a box to Mad Honk that were 62cm and 54cm. I think it was 50X32X9 or 10
--25" Trek sent to Gary12000 ...cannot remember.
----------------------------------------------------------------------------------------------------
Wheels
--If pastorbobnlnh happens to have kept the box, he might be able to measure the box of a set of wheels that I sent snugly
--Single wheel (29X29X7)
---------------------------------------------------------------------------------------------------
Handle bars
--Straight
--Road drops
----------------------------------------------------------------------------------------------------
Forks
--Short
--Long
----------------------------------------------------------------------------------------------------
Racks
--
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#2
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,291
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,204 Times
in
700 Posts
Subscribed. GREAT idea for a thread.
#3
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,671
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1370 Post(s)
Likes: 0
Liked 1,743 Times
in
934 Posts
No matter what I am shipping, I usually cut a box to fit the item inside. Handlebars are pricey because the length + girth elevates postal costs and FedEx or Puralator are out of the question. Forks can also be pricey, and the post office wanted close to $70.00 CND to send this set to Australia (I live in Canada usually)...
I managed to get this Bianchi into a box 40" long x 29" high x 9" wide...
To get the bike into that box meant removing wheels, handlebar/stem, saddle/seat post and drive side crank. Cost to ship 1000 miles (approx) was $127.00 CND. Had I not removed the rear wheel, the box would have been 56" long, jumping the shipping cost to $214.00 CND and I would have been forced to use FedEx or Puralator because the box size would exceed postal limits.
In short, make the box as small as you can to reduce shipping cost.
I managed to get this Bianchi into a box 40" long x 29" high x 9" wide...
To get the bike into that box meant removing wheels, handlebar/stem, saddle/seat post and drive side crank. Cost to ship 1000 miles (approx) was $127.00 CND. Had I not removed the rear wheel, the box would have been 56" long, jumping the shipping cost to $214.00 CND and I would have been forced to use FedEx or Puralator because the box size would exceed postal limits.
In short, make the box as small as you can to reduce shipping cost.
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
#4
Senior Member
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,136
Mentioned: 200 Post(s)
Tagged: 0 Thread(s)
Quoted: 2985 Post(s)
Liked 3,666 Times
in
1,380 Posts
I've had handlebars arrive in perfect condition just wrapped in paper. One set from jolly old England.
I cut down a bike box from the LBS for wheels. They never give me wheel boxes, too uncommon and they use them all of the time. Had a set of wheels sent to me from France sandwiched by 2 pieces of cardboard, taped along the perimeter. Solid axles popped through of course, but they arrived in perfect condition.
I shipped a fork only once. Used a fully threaded bolt to secure the ends, made a box. It is easy to make a box.
I cut down a bike box from the LBS for wheels. They never give me wheel boxes, too uncommon and they use them all of the time. Had a set of wheels sent to me from France sandwiched by 2 pieces of cardboard, taped along the perimeter. Solid axles popped through of course, but they arrived in perfect condition.
I shipped a fork only once. Used a fully threaded bolt to secure the ends, made a box. It is easy to make a box.
#5
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,827
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2284 Post(s)
Liked 2,020 Times
in
1,242 Posts
This is a great time of the year (under normal circumstances) to get packing material. Spring inventory is arriving, if available.
Likes For clubman:
#6
Senior Member
Join Date: Jan 2016
Posts: 3,382
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 851 Post(s)
Liked 2,192 Times
in
1,234 Posts
When I shipped my frame to Franklin for painting , I went to Trek and they gave me a box and I cut it down to fit. With insurance it was about $90 each way. Jack returned the frame after paint in the same box . I think cutting the box to better fit saved me $30 give or take. I used Bikeflights .
#7
Thrifty Bill
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,561
Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more
Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1233 Post(s)
Liked 948 Times
in
620 Posts
I've fit up to 25 inch frame and fork into a 108" box. I did have to dismantle the bike box, rebuild it shoe box style (bottom with a lid) to get the width of the box down to 7 inches. Just shipped a 22 inch road frame and fork in a 23x8x38 box. Fork has to be removed first and it straddles the ST. The postage break is not just 108" or less. Getting it down to 100 inches total cut the postage in HALF. That being said, its a PITA.
And in the world of shipping, its girth plus length. Girth = the two shortest measurements, doubled, then add length.
If you look at my fold measurements, I was shooting for 22 high, it grew a little in packing to about 22 1/4, which in the land of Fed Ex, is rounded up. Bike boxes at the LBS are often 8 1/2 inches wide (rounds up to 9 inches) or 9 1/2 inches wide, or even higher. Juvenile bike boxes are often 7 1/2 inch wide.
The "best" deal I ever got was shipping a frame to Whitehorse, Yukon, Canada (from my home in NC. 25 inch frame and fork, box built shoe box style, right at the 108 inch limit. Sent USPS Priority, $85.....You are talking almost 6,000 kilometers.
And in the world of shipping, its girth plus length. Girth = the two shortest measurements, doubled, then add length.
If you look at my fold measurements, I was shooting for 22 high, it grew a little in packing to about 22 1/4, which in the land of Fed Ex, is rounded up. Bike boxes at the LBS are often 8 1/2 inches wide (rounds up to 9 inches) or 9 1/2 inches wide, or even higher. Juvenile bike boxes are often 7 1/2 inch wide.
The "best" deal I ever got was shipping a frame to Whitehorse, Yukon, Canada (from my home in NC. 25 inch frame and fork, box built shoe box style, right at the 108 inch limit. Sent USPS Priority, $85.....You are talking almost 6,000 kilometers.
Last edited by wrk101; 01-23-22 at 05:58 PM.
Likes For wrk101:
#8
Thrifty Bill
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,561
Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more
Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1233 Post(s)
Liked 948 Times
in
620 Posts
One thing I ship A LOT are cranksets. If you build a box around the drive side arm, attach the non drive arm, you can fit it in a priority mail flat rate padded envelope. I've sent cranksets all the way to Hawaii for under $9. I use a lot of padded flat rate envelopes. By printing postage on line, anything 16 ounces or less can go first class mail (within the USA), Thats your cheapest option. Cross over the 16 ounce mark, I will either use the letter sized flat rate envelope (cheaper), or the padded flat rate envelope. Just mailed out a set of combination wrenches in a flat rate letter envelope.
Just sent out a set of 26'r wheels today. 23-14-24. Was shooting for 23 square, but the box grew on me. Wanted to get it 12 inch high, that was a non-starter. Nutted axles, so that made wheels just that much wider.
Just sent out a set of 26'r wheels today. 23-14-24. Was shooting for 23 square, but the box grew on me. Wanted to get it 12 inch high, that was a non-starter. Nutted axles, so that made wheels just that much wider.
Last edited by wrk101; 01-23-22 at 06:13 PM.
#9
Senior Member
Join Date: Mar 2021
Location: Beaverton, OR
Posts: 1,438
Bikes: You had me at rusty and Italian!!
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 559 Post(s)
Liked 1,023 Times
in
532 Posts
I worked in the parts department at a car dealership that shipped A LOT of parts around the US and for odd sized parts we always cut a box to fit the contents as tight as possible. Sometimes the dimensions are unavoidable and shipping was expensive. Math is math.
I have shipped one bike and I don’t think I’ll ever do it again. I managed to score a bike box and I zip tied things together so they wouldn’t shift but it was a ton of work. I knew the box would be toast by the time it arrived and hopefully the stuff inside was undamaged.
I ordered a set of wire bead tires from the Netherlands for less than $50 and I have no idea how the seller made a profit.
I have shipped one bike and I don’t think I’ll ever do it again. I managed to score a bike box and I zip tied things together so they wouldn’t shift but it was a ton of work. I knew the box would be toast by the time it arrived and hopefully the stuff inside was undamaged.
I ordered a set of wire bead tires from the Netherlands for less than $50 and I have no idea how the seller made a profit.
#10
Junior Member
Oh my gosh - very timely thread. I've been selling a bunch of parts and the shipping on handlebars is killer. I did the same thing other folks have suggested, making a custom box to fit with the tightest wiggle room possible, but I do also want to make sure stuff is well padded when I sell it. It's very easy to spend 20 bucks shipping handlebars that you may only sell for 50. Smaller stuff I like to just use the flat rate packaging because it's easier, even if you lose a dollar or two. And I'd rather use the boxes than the envelopes because I feel like it's easier to make sure stuff arrives intact in a rigid box.
__________________
Current project: 1976 Motobecane Grand Record restomod
Current project: 1976 Motobecane Grand Record restomod
#11
Honorary Bicycle Rider
My experience shipping handlebars requires my local friends and family to save used shipping materials for me. Typically, I take two of the medium bubble wrap envelopes to cover both halves, then use a sleeve of the poly bagging material. I was rejected once for using First Class, so I use Priority now. At typical packaged weight of 13 oz, this normally is less than $9. I will add photos next time I ship.
#12
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,918
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 114 Post(s)
Tagged: 0 Thread(s)
Quoted: 1273 Post(s)
Liked 1,806 Times
in
1,094 Posts
Jdawg,
I sent a fixed gear wheel and parts out today in a wheel box from my LBS 26'' X 26" X7" for $22 via ship bikes. A tough size to find but every so often my LBS comes through for me. Smiles, MH
I sent a fixed gear wheel and parts out today in a wheel box from my LBS 26'' X 26" X7" for $22 via ship bikes. A tough size to find but every so often my LBS comes through for me. Smiles, MH