Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Cool Tips for wrapping bars

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Cool Tips for wrapping bars

Old 01-16-20, 06:46 PM
  #1  
jbucky1
Senior Member
Thread Starter
 
jbucky1's Avatar
 
Join Date: Mar 2007
Location: portland, Ore
Posts: 397

Bikes: Moots Routt

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 94 Post(s)
Liked 22 Times in 20 Posts
Cool Tips for wrapping bars

Anyone have any cool tips for wrapping bars?

here is mine.
#1 When using stiff tape, wrap the bars without exposing the adhesive, take the tape off and rewrap, the tape will be broken in a bit and wrap and handle nicer.

- James
www.buckyrides.com
jbucky1 is offline  
Likes For jbucky1:
Old 01-16-20, 08:53 PM
  #2  
dsbrantjr
Senior Member
 
dsbrantjr's Avatar
 
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,317

Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta

Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1437 Post(s)
Liked 1,085 Times in 720 Posts
Finish off the wrap with self-fusing silicone tape instead of electrical tape.
dsbrantjr is offline  
Likes For dsbrantjr:
Old 01-17-20, 08:45 AM
  #3  
HillRider
Senior Member
 
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,617

Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!

Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2001 Post(s)
Likes: 0
Liked 1,047 Times in 712 Posts
Originally Posted by dsbrantjr
Finish off the wrap with self-fusing silicone tape instead of electrical tape.
I've seen this recommended several places and tried it myself. It does make a very neat finishing tape but I found my hands tended to curl up the edges when holding the bars near the stem. I've gone back to electrical tape but use high quality electrical tape (Scotch brand), not the dollar store stuff.
HillRider is offline  
Old 01-17-20, 08:56 AM
  #4  
bampilot06
Senior Member
 
Join Date: Dec 2019
Location: 757
Posts: 8,423

Bikes: Madone, Emonda, 5500, Ritchey Breakaway

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 7606 Post(s)
Liked 3,593 Times in 1,542 Posts
Iím gunna be wrapping my bars for the first time soon. Hopefully not as difficult as I am thinking it will be in my head.

My LBS is a trek store, so most likely that is where iíll be buying mine from. Online the bontrager stuff ranges from 15 dollars all the way up to 75, anything I should take into consideration other than color? Silly question but I couldnít tell the difference between a lot of them. (looking at a picture online not in person).
bampilot06 is offline  
Old 01-17-20, 09:16 AM
  #5  
trailangel
Senior Member
 
trailangel's Avatar
 
Join Date: Feb 2014
Location: Pasadena, CA
Posts: 4,812

Bikes: Schwinn Varsity

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1901 Post(s)
Liked 691 Times in 403 Posts
Bottle of wine
trailangel is offline  
Likes For trailangel:
Old 01-18-20, 12:00 AM
  #6  
jbucky1
Senior Member
Thread Starter
 
jbucky1's Avatar
 
Join Date: Mar 2007
Location: portland, Ore
Posts: 397

Bikes: Moots Routt

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 94 Post(s)
Liked 22 Times in 20 Posts
Originally Posted by trailangel
Bottle of wine
Good call
jbucky1 is offline  
Old 01-18-20, 12:01 AM
  #7  
jbucky1
Senior Member
Thread Starter
 
jbucky1's Avatar
 
Join Date: Mar 2007
Location: portland, Ore
Posts: 397

Bikes: Moots Routt

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 94 Post(s)
Liked 22 Times in 20 Posts
Originally Posted by bampilot06
Iím gunna be wrapping my bars for the first time soon. Hopefully not as difficult as I am thinking it will be in my head.

My LBS is a trek store, so most likely that is where iíll be buying mine from. Online the bontrager stuff ranges from 15 dollars all the way up to 75, anything I should take into consideration other than color? Silly question but I couldnít tell the difference between a lot of them. (looking at a picture online not in person).
I like tape that has a bit of stretch and is thinner to wrap easier
- james
www.buckyrides.com
jbucky1 is offline  
Old 01-18-20, 07:38 AM
  #8  
easyupbug 
Senior Member
 
Join Date: Jan 2013
Posts: 2,417

Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 485 Post(s)
Liked 442 Times in 322 Posts
I have arthritis in my hands so I like thicker, more shock-absorbent tape, some of my bars have Specialized Body Geometry Bar Phat gel insert for extra cushioning, which one might not want as it does very slightly give a less direct connect to your steering/handling. Some like the tape with adhesive or a sticky gel strip to keep it from shifting, but I find it unnecessary and a pain to clean for re-taping. I have one handlebar with leather and it looks fabulous, but hard for me to get a nice wrap and it offers little cushioning. Have two with shellaced Nubaum's cotton that looks great on the C&V bikes, lasts for years with a little shellac touch-up but again no padding and not at all "grippy", it is slick. When I buildout a bike for a family member I almost always go with Cinelli cork as it give good grip, cushioning and wears well, it does have annoying sticky strip but that is my kids problem when a new wrap is needed.
easyupbug is offline  
Likes For easyupbug:
Old 01-18-20, 09:47 AM
  #9  
_ForceD_
Sr Member on Sr bikes
 
_ForceD_'s Avatar
 
Join Date: Jul 2015
Location: Rhode Island (sometimes in SE Florida)
Posts: 2,059

Bikes: Several...from old junk to new all-carbon.

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 891 Post(s)
Liked 641 Times in 342 Posts
I don't like exposed adhesive tape at all. I wrap from the top down and secure the end inside the handlebar with the plug. No exposed, unsightly tape. Some people say that wrapping this opposite way causes the edges of the tape to roll up. That's not my experience...if you wrap it tight enough.

Another alternative...if the bar tape is too thick to allow the plug into the bar end...wrap from the top down to the brake hood, and then a seperate piece from the bottom up to the brake hood. Secure them under the brake hood with the adhesive tape.

Dan

Last edited by _ForceD_; 01-18-20 at 09:50 AM.
_ForceD_ is offline  
Likes For _ForceD_:
Old 01-18-20, 05:01 PM
  #10  
MikeWMass
Senior Member
 
Join Date: May 2012
Location: western Massachusetts (greater Springfield area)
Posts: 628

Bikes: Velosolex St. Tropez, LeMond Zurich (spine bike), Rotator swb recumbent

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 39 Post(s)
Likes: 0
Liked 28 Times in 13 Posts
IME, wrapping top down works with thin or cloth tape. I like thicker tape, and find that my hands roll up the edges of the tape when wrapped this way.
MikeWMass is offline  
Likes For MikeWMass:
Old 01-18-20, 05:07 PM
  #11  
tyrion
Senior Member
 
tyrion's Avatar
 
Join Date: Oct 2015
Location: San Diego, California
Posts: 3,970

Bikes: Velo Orange Piolet

Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 2165 Post(s)
Liked 1,875 Times in 907 Posts
Use a clamp like this to hold a partially done tape job. I like to step back and look at it from different angles to see if it looks even and consistent.
tyrion is offline  
Old 01-18-20, 05:45 PM
  #12  
delbiker1 
Mother Nature's Son
 
delbiker1's Avatar
 
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 2,801

Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie

Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 751 Post(s)
Liked 1,119 Times in 667 Posts
I like the looks of cloth wrap like Newbaum's, but also like wrap a a bit thicker with some padding. I usually get what ever cheaper padded wrap I find on sale and then wrap over that with Newbaum's, choosing the color depending on the bike. Also, I like wrap without the adhesive strip. Sometimes that can be easily pulled off, sometimes not.
delbiker1 is offline  
Likes For delbiker1:
Old 01-18-20, 07:47 PM
  #13  
DiabloScott
It's MY mountain
 
DiabloScott's Avatar
 
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 9,838

Bikes: Klein, Merckx, Trek

Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 3950 Post(s)
Liked 2,453 Times in 1,337 Posts
Originally Posted by bampilot06

My LBS is a trek store, so most likely that is where iíll be buying mine from. Online the bontrager stuff ranges from 15 dollars all the way up to 75, anything I should take into consideration other than color? Silly question but I couldnít tell the difference between a lot of them. (looking at a picture online not in person).
Wrapping is a skill and I wouldn't expect your first time to be perfect, but it can be pretty good if you take your time.
A lot of wraps are too slippery for me - I like cork like Cinelli or perforated like Fizik, with a little padding and a little grippiness.
DiabloScott is offline  
Old 01-18-20, 07:51 PM
  #14  
bampilot06
Senior Member
 
Join Date: Dec 2019
Location: 757
Posts: 8,423

Bikes: Madone, Emonda, 5500, Ritchey Breakaway

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 7606 Post(s)
Liked 3,593 Times in 1,542 Posts
Originally Posted by DiabloScott
Wrapping is a skill and I wouldn't expect your first time to be perfect, but it can be pretty good if you take your time.
A lot of wraps are too slippery for me - I like cork like Cinelli or perforated like Fizik, with a little padding and a little grippiness.
thanks for the insight!
bampilot06 is offline  
Old 01-18-20, 08:23 PM
  #15  
LAJ
So it is
 
LAJ's Avatar
 
Join Date: Sep 2008
Location: Westminster, CO
Posts: 20,471

Bikes: Luzerne, 684, Boreas, Wheelhouse, Alize©ģ, Bayamo, Cayo

Mentioned: 245 Post(s)
Tagged: 1 Thread(s)
Quoted: 10736 Post(s)
Liked 4,104 Times in 2,410 Posts
One tip I picked up from here.... If you use electrical tape to finish it off, which I do, the inclination is to pull it tight, or stretch it as you apply it. Its natural tendency is to shrink back up, and you'll see that result a few weeks down the road. Make it a nice tight finish, but don't stretch it, then cut it. You'll be much happier.
__________________
Originally Posted by Jorgediaz View Post
Fellow riders, the only free cheese is in the mousetrap!










LAJ is offline  
Likes For LAJ:
Old 01-18-20, 08:48 PM
  #16  
joesch
Senior Member
 
joesch's Avatar
 
Join Date: Sep 2017
Location: Hotel CA / DFW
Posts: 1,505

Bikes: 83 Colnago Super, 87 50th Daccordi, 79 & 87 Guerciotti's, 90s DB/GT Mtn Bikes, 90s Colnago Master and Titanio, 96 Serotta Colorado TG, 95/05 Colnago C40/C50, 06 DbyLS TI, 08 Lemond Filmore FG SS, 12 Cervelo R3, 20/15 Surly Stragler & Steamroller

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 524 Post(s)
Liked 596 Times in 390 Posts
I do many leather wraps and its maybe the most challenging to wrap and have stay in place.
Using a under layer adheasive tape or double sided will really help keep any wrap in place and add an extra layer of wrapping.
joesch is offline  
Old 01-18-20, 09:33 PM
  #17  
u235
Senior Member
 
u235's Avatar
 
Join Date: Mar 2017
Posts: 1,185
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 437 Post(s)
Liked 133 Times in 86 Posts
I tape strips of old bar tape under my new tape in stategic spots, gives extra padding where I want it without needing a narrower selection of overly thick tape where I don't. Similar to gel pads. Types of material and even differences in brands and textures are a VERY personal choice. I've used tapes of various cost levels that seemed to be exactly what I desire based on marketing and reviews and they totally sucked and I had the exact opposite experience.

Last edited by u235; 01-18-20 at 09:40 PM.
u235 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell or Share My Personal Information -

Copyright © 2023 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.