Nishiki make good bikes?
#1
Senior Member
Thread Starter
Join Date: Dec 2014
Location: Texas
Posts: 230
Bikes: '88 Peugot 12 spd road bike, Nishiki hybrid, JC Penney 10 spd
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 61 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Nishiki make good bikes?
Thinking of buying this:
Nishiki Adult Colorado 29'er Mountain Bike 2015 | DICK'S Sporting Goods
I know Nishiki was pretty good once, are they still decent bikes?
Nishiki Adult Colorado 29'er Mountain Bike 2015 | DICK'S Sporting Goods
I know Nishiki was pretty good once, are they still decent bikes?
#2
Senior Member
Join Date: Oct 2004
Location: Seattle
Posts: 3,250
Bikes: Kuota Ksano. Litespeed T5 gravel - brilliant!
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
Nishiki, Univega, Diamondback, and Raleigh were all made in China by Raleigh USA. Nishiki and Univega brands were abandoned by Raleigh some time ago. The Nishiki name is now used by Dicks as a sort of house brand for bikes they design and sell.
To answer your question, I don't know because they are made for Dicks only and haven't received much attention from these forums.
To answer your question, I don't know because they are made for Dicks only and haven't received much attention from these forums.
#3
Banned
Make (brand name) is different than Maker.. In one era Japan was where the US Importers went to get Frames & Bikes Manufactured to Sell..
but the drive to get lower cost suppliers had them Go to China ..
A Lot of really High Quality stuff comes out of Taipei .. it all depends on the contract Priorities.
Shanghai may be shipping different stuff if Cheap is the Importers first requirement ..
but the drive to get lower cost suppliers had them Go to China ..
A Lot of really High Quality stuff comes out of Taipei .. it all depends on the contract Priorities.
Shanghai may be shipping different stuff if Cheap is the Importers first requirement ..
Last edited by fietsbob; 03-25-15 at 09:20 AM.
#4
Senior Member
Join Date: May 2011
Location: Upstate NY
Posts: 3,794
Bikes: Bianchi San Mateo and a few others
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 634 Post(s)
Likes: 0
Liked 13 Times
in
9 Posts
Raleigh was originally an English bicycle manufacturer, founded in the late 1800s. Sometime around 1980, Huffy licensed the "Raleigh USA" brand to sell bikes for the U.S. market. Raleigh USA was a completely separate entity from the original English Raleigh, sort of like how the "GMC Denali" bikes sold by Walmart have no real connection to General Motors Corporation. Anyway, Derby Cycle, a German company, bought the Raleigh Bicycle Company of England and later reacquired the rights to the Raleigh USA name from Huffy. Derby opened a Raleigh USA factory in Kent, Washington, and produced bikes for five or six years before shuttering the plant and moving all production to China and Taiwan in the mid-1990s.
The Nishiki brand was created in the '60s for Japanese bikes sold in the U.S. by West Coast Cycles, an importer based in California. The Nishiki brand name was sold to Derby in 1989. In 2010, Dick's Sporting Goods bought rights to the Nishiki name for the U.S. market, so any recent Nishiki-branded bikes in the U.S. are a house brand of Dick's Sporting Goods.
The Univega brand was created for Japanese bikes imported by Ben Lawee. Derby acquired the Univega name when Ben Lawee retired from the bike business in 1996.
The Diamondback brand was created in the late '70s for BMX bikes sold in the U.S. by Western States Imports, another California-based importer of Asian bikes. WSI also sold Japanese road bikes under the Centurion name. Derby bought the Diamondback name circa 2000, as WSI was closing for good.
In 2001, Derby sold Raleigh USA and Diamondback. The two brands are owned by the same owner and are both headquartered together in Kent, Washington. Manufacturing is done in China, primarily by Kinesis.
Likes For SkyDog75:
#5
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,006
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1464 Post(s)
Liked 1,538 Times
in
805 Posts
When my wife shops for exercise clothing at Dick's, I browse through the bicycles. My local Dick's has an extensive bike area with a service bay. The whole line-up of bikes is basically above-department-store quality. These bikes are fine for normal recreational use.
The biggest factor in the OP's satisfaction will be the care taken in assembly, trimming excess cable housing, adjusting brakes and shifting to work correctly, checking wheel true, adjusting factor bearings in the hubs, and (of course) assistance with fit.
A good mechanic and a few moments of adjustment, and that bike will be fine for typical recreational use.
OP, don't walk out of the store with the bike until everything is working right and to your satisfaction. Find out when you can come back for routine tune-ups and adjustment in the first 60 days of use.
The biggest factor in the OP's satisfaction will be the care taken in assembly, trimming excess cable housing, adjusting brakes and shifting to work correctly, checking wheel true, adjusting factor bearings in the hubs, and (of course) assistance with fit.
A good mechanic and a few moments of adjustment, and that bike will be fine for typical recreational use.
OP, don't walk out of the store with the bike until everything is working right and to your satisfaction. Find out when you can come back for routine tune-ups and adjustment in the first 60 days of use.
#6
Bicyclerider4life
I had a 1980's/1990's Nishiki "Colorado" mountain bike, until some low life motherless ... stole it (yes, it was locked: name brand heavy U-Lock, heavy cable lock, AND a heavy chain lock. I know who took it, but he owns a few of the cops in that town, so nothing will ever be done to him)
Anyway, I never had any trouble with it.
Anyway, I never had any trouble with it.
Last edited by bicyclridr4life; 03-30-15 at 09:10 AM. Reason: fat finger spelling oops corrected
#7
Junior Member
I had a 1980's/1990's Nishiki "Colorado" mountain bike, until some low life motherless ... stole it (yes, it was locked: name brand heavy U-Lock, heavy cable lock, AND a heavy chain lock. I know who took it, but he owns a few of the cops in that town, so nothing will ever be done to him)
Anyway, I never had any trouble with it.
Anyway, I never had any trouble with it.
#9
Senior Member
If you ever find a 70's or 80's Nishiki, JUMP ON IT! But not so much a modern one from Dick's
edit: Never mind. I fell for this zombie thread. My bad.
edit: Never mind. I fell for this zombie thread. My bad.
#10
Senior Member
Join Date: Apr 2019
Posts: 255
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Liked 95 Times
in
60 Posts

FWIW, my first 10 speed was a 24” 1974 Nishiki Olympiad, my second was a 1984/1985 Olympic 12, which I still have. Heavy but well built. As mentioned above Nishiki exists in name only, they aren’t the steel, lugged frame bikes they once were. My Olympic 12 still looks nearly new after 35 years of loving use.
Likes For Dr.Lou:
#11
Junior Member
That Olympic 12 is a beauty! Must be super fun to ride. I would love to hear the comments you get from other riders. A real beauty. Glad to see you are taking such good care of it.
Likes For Graboid1:
#12
Senior Member
Join Date: Oct 2008
Location: Seattle
Posts: 1,438
Bikes: my precious steel boys
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 438 Post(s)
Liked 601 Times
in
358 Posts
Not sure about Nishiki but some of the best deals are from "zombie" brands - Raleigh in particular had some great deals on touring and gravel bikes for a while, and the "new" Masi bikes are perfectly nice as well.
#13
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,547
Bikes: Stormchaser, Paramount, Timberjack, Expert TG, Samba tandem
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 3026 Post(s)
Liked 1,963 Times
in
1,277 Posts
It was only ever a brand.
The company that owns Raleigh (and Haibike and Ghost) just sold off Diamondback (and Redline BMX and iZip). DB’s new owners are also Mavic’s new owners. I’m not sure what’s going on at Raleigh but DB has put out some excellent mountain bikes in the last few years. Not very zombie like at all. But they were losing money.
https://www.bicycleretailer.com/indu...s#.XX0McyVlDDt
The company that owns Raleigh (and Haibike and Ghost) just sold off Diamondback (and Redline BMX and iZip). DB’s new owners are also Mavic’s new owners. I’m not sure what’s going on at Raleigh but DB has put out some excellent mountain bikes in the last few years. Not very zombie like at all. But they were losing money.
https://www.bicycleretailer.com/indu...s#.XX0McyVlDDt
Last edited by Darth Lefty; 09-14-19 at 09:58 AM.
#14
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 3,812
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 680 Post(s)
Liked 1,131 Times
in
730 Posts
I'm an old guy with old equipment so I can offer good advice on old equipment. Some of the new bikes to say the least need micrometer adjustments with micro/macro examination. That's not me, yet...
When I look around at older bikes that have been converted to gravel or touring I find the same old names, Nishiki, Univega, Fuji, Panasonic, Myata. Most are Japanese. Almost all are ChroMo.
__________________
No matter where your at... There you are... Δf:=f(1/2)-f(-1/2)
#15
Senior Member
They aren't the same quality bike that they used to be. I still have my Nishiki Ariel "Cunningham Design" mountain bike I bought back in 1989. It's as close to bullet proof as a bike can be yet not weigh 50 lbs. It's still a fun bike to ride. I've looked at the Nishiki's in Dick's and they are nowhere near the same quality.
#17
Full Member
Join Date: Aug 2017
Location: Wisconsin
Posts: 495
Bikes: 2015 Felt Z75 Disc, 2008 Fuji Cross Comp, 2010 Trek Navigator 1.0, 1974 Raleigh Sports, 1974 Schwinn Le Tour, 1981 Schwinn Super Le Tour, Surly Cross Check, 2021 Giant Talon 2
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 185 Post(s)
Liked 67 Times
in
56 Posts
I have found them to be pretty good. I had a Maricopa road bike which was nice and kids have had their mountain bikes. A step below good bike shop bikes, but much better than big box store bikes.
__________________
check out the Frugal Average Bicyclist
Frugal Average Bicyclist – The goal here is to help you keep cycling on a budget.
check out the Frugal Average Bicyclist
Frugal Average Bicyclist – The goal here is to help you keep cycling on a budget.
#18
Jazz Aficionado
Had a Nishiki Pro, 1975, steel, lugged, Suntour... rode it hard and fast. Found a few years later at a Police Auction, a Teledyne Titanium track bike, Campy Super Record, moved all components to the Nishiki, sold the Teledyne and the Nishiki Pro granted me a bunch more years of mileage.
#20
Thread Killer
Join Date: Aug 2008
Location: Ann Arbor, MI
Posts: 11,846
Bikes: '15 Kinesis Racelight 4S, '76 Motebecane Gran Jubilée, '17 Dedacciai Gladiatore2, '12 Breezer Venturi, '09 Dahon Mariner, '12 Mercier Nano, '95 DeKerf Team SL, '19 Tern Rally, ‘21 Breezer Doppler Cafe+, ‘19 T-Lab X3
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2269 Post(s)
Liked 1,338 Times
in
815 Posts
They aren't the same quality bike that they used to be. I still have my Nishiki Ariel "Cunningham Design" mountain bike I bought back in 1989. It's as close to bullet proof as a bike can be yet not weigh 50 lbs. It's still a fun bike to ride. I've looked at the Nishiki's in Dick's and they are nowhere near the same quality.
Last edited by cb400bill; 06-05-21 at 05:15 PM.
#22
Senior Member
Here in Japan one can find the old Nishiki road bikes. They came in a full range of models here, the most popular was the Olympic, which was a well-made, general use road bike. But they also make a smaller number of more high-end bikes which tend to sell for rather high prices, at least in Japan. I used to have an Olympic 12 when I was a kid, I traded it for a Velo Solex motorized bike.
I had to look and see what was available nearby, and found this: https://page.auctions.yahoo.co.jp/jp/auction/c908376809
This is a Nishiki touring frame from the late 80's, brand new, and never assembled into a complete bike. I would be tempted to have it, but it is too small for me.
I had to look and see what was available nearby, and found this: https://page.auctions.yahoo.co.jp/jp/auction/c908376809
This is a Nishiki touring frame from the late 80's, brand new, and never assembled into a complete bike. I would be tempted to have it, but it is too small for me.
Last edited by 50PlusCycling; 06-09-21 at 03:20 AM.