Brake levers for 26" fork w/ 700c wheels?
06-15-18, 01:34 AM
#1
Newbie
Thread Starter
Brake levers for 26" fork w/ 700c wheels?
I have a fork with canti mounts for 26" wheels. I am putting a 700c rim wheel on this bike. Are there special extra-long brakes for reaching up to a 700c rim? Folks at my LBS said they existed but there were none in the shop. I couldn't find anything online or on the forums either, mostly because everytime I search "26 inch fork 700c wheels," I get only results for putting 26" wheels on 700c forks! Computers, man...
Any advise on how to proceed? Adapter maybe? special brakes? Thanks
Before anyone tells me to just use 26ers or get a new fork: No. I already have the fork and the wheels, too late!
Any advise on how to proceed? Adapter maybe? special brakes? Thanks
Before anyone tells me to just use 26ers or get a new fork: No. I already have the fork and the wheels, too late!
06-15-18, 03:35 AM
#3
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18373 Post(s)
Liked 4,508 Times
in
3,351 Posts
What kind of tires are you using? Do you have clearance? Fork type?
You may be able to use regular road brake calipers. Perhaps long reach if necessary. There are some vintage MTB calipers that might work.
DISC brake?
There may be some long V-Brake arms. I can't say if they're long enough, but perhaps worth looking at.
https://www.ebay.com/itm/44mm-Extra-...e/221991915213
It looks like your tire size is somewhat limited with these. They would also decrease the strength of the pull somewhat.
You may be able to use regular road brake calipers. Perhaps long reach if necessary. There are some vintage MTB calipers that might work.
DISC brake?
There may be some long V-Brake arms. I can't say if they're long enough, but perhaps worth looking at.
https://www.ebay.com/itm/44mm-Extra-...e/221991915213
It looks like your tire size is somewhat limited with these. They would also decrease the strength of the pull somewhat.
06-15-18, 04:25 AM
#4
Engineer
Join Date: May 2010
Location: Bucharest, Romania, Europe
Posts: 591
Bikes: 1989 Krapf (with Dura-ace) road bike, 1973 Sputnik (made by XB3) road bike , 1961 Peugeot fixed gear, 2010 Trek 4400
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 38 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Here are some ideas:
https://www.google.ro/search?q=adapt...EIKjAA#imgrc=_
In summary:
Horseshoe that provides new canti bosses for 28inch wheels
Extra long v-brakes (with the downside of reducing brake force)
Long reach calipers (like for a road bike, or search for U brake that mount on the bridge/crown hole)
Disc brakes, drum brakes, or any other hub brake that is suitable for the frame (or more easy to convert and adapt)
Moving the bosses by welding.
https://www.google.ro/search?q=adapt...EIKjAA#imgrc=_
In summary:
Horseshoe that provides new canti bosses for 28inch wheels
Extra long v-brakes (with the downside of reducing brake force)
Long reach calipers (like for a road bike, or search for U brake that mount on the bridge/crown hole)
Disc brakes, drum brakes, or any other hub brake that is suitable for the frame (or more easy to convert and adapt)
Moving the bosses by welding.
06-15-18, 04:42 AM
#5
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18373 Post(s)
Liked 4,508 Times
in
3,351 Posts
It looks like PAUL brakes also have a relatively adjustable design.
https://www.ebay.com/itm/Paul-Compon...r/112574137553
It might be cheaper to buy a new fork or new wheel.
https://www.ebay.com/itm/Paul-Compon...r/112574137553
It might be cheaper to buy a new fork or new wheel.
06-15-18, 06:46 AM
#6
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
The OP needs to move the brake pads up 31.5 mm or about 1-1/4" and I don't know if those Paul brakes adjust that far. Even if they do, the reduced leverage would make them rather ineffective. I agree, it might be cheaper and more efficient for the OP to cut his losses and buy either a new wheel or a new fork.
06-15-18, 09:50 AM
#7
Banned
You may be too stubborn to make it work with what you have.
...
...
Last edited by fietsbob; 06-15-18 at 11:50 AM.
06-15-18, 10:49 AM
#8
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,845
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2338 Post(s)
Liked 2,822 Times
in
1,541 Posts
I have a fork with canti mounts for 26" wheels. I am putting a 700c rim wheel on this bike. Are there special extra-long brakes for reaching up to a 700c rim? Folks at my LBS said they existed but there were none in the shop. I couldn't find anything online or on the forums either, mostly because everytime I search "26 inch fork 700c wheels," I get only results for putting 26" wheels on 700c forks! Computers, man...
Any advise on how to proceed? Adapter maybe? special brakes? Thanks
Before anyone tells me to just use 26ers or get a new fork: No. I already have the fork and the wheels, too late!
Any advise on how to proceed? Adapter maybe? special brakes? Thanks
Before anyone tells me to just use 26ers or get a new fork: No. I already have the fork and the wheels, too late!
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
06-15-18, 05:06 PM
#9
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,806
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1943 Post(s)
Liked 2,164 Times
in
1,323 Posts
So... Does the fork have a mounting hole for a caliper brake?
John
John
