1974 Wizard
#1
Newbie
Thread Starter
1974 Wizard
Here's my dad's one of a kind Wizard bicycle. It's hard to find much online about Wizards since they were made for such a limited amount of time by Brian Baylis. Wondering if anyone has any insights about this bicycle and how much it might be worth. It hasn't been ridden in years but has been garaged since its last service and should be in decent riding shape with some new tires. Dad insists it doesn't need a tune up and is ready to roll if you’re looking to ride it! We'd love to hear if anyone has any insights on how much it’s worth these days… thx!
Details:
Wizard, built by Bryan Baylis and Michael Howard
Year built = 1974
Frame #10
Campagnolo components
10 speed
Frame size = 56cm
Low mileage
One owner
Never raced
Never crashed
Some photos below and more at this link:
https://drive.google.com/drive/folde...usp=share_link



Details:
Wizard, built by Bryan Baylis and Michael Howard
Year built = 1974
Frame #10
Campagnolo components
10 speed
Frame size = 56cm
Low mileage
One owner
Never raced
Never crashed
Some photos below and more at this link:
https://drive.google.com/drive/folde...usp=share_link




#2
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,930
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 2245 Post(s)
Liked 2,685 Times
in
1,723 Posts
Price is not a thing if it’s a Baylis. Wow. And my size. That is a piece of art.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
Likes For jdawginsc:
#3
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 13,931
Mentioned: 407 Post(s)
Tagged: 1 Thread(s)
Quoted: 3618 Post(s)
Liked 2,984 Times
in
1,967 Posts
-----
thanks very much for sharing this most marvelous treasure!
slightly surprised to see it kitted with a 3TTT Gran Prix stem; they were discontinued in 1971
the forum has had prior Wizard discussions
if you wish you could use the search function to bring them up
-----
-----
thanks very much for sharing this most marvelous treasure!

slightly surprised to see it kitted with a 3TTT Gran Prix stem; they were discontinued in 1971
the forum has had prior Wizard discussions
if you wish you could use the search function to bring them up
-----
-----
#4
Senior Member
Join Date: Nov 2010
Posts: 3,511
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 585 Post(s)
Liked 611 Times
in
447 Posts
Although you do have to deal with headaches, costs and potential issues with buyers, eBay is probably your best bet if you want to get the most for it. Or another auction site or anywhere else that you can get folks who really want it bidding the price up.
wrk101 has written many times about his eBay experiences, the good the bad and the sometimes ugly. One thing I remember is him saying the buyer always wins if there is a dispute. Then there is the issue of packing and shipping, assuming it isn't a local sale. But again, if you want the most for it, that's probably going to yield the highest price.
I won't even suggest a value. All I'll say is it ain't gonna be cheap, that's for sure!
wrk101 has written many times about his eBay experiences, the good the bad and the sometimes ugly. One thing I remember is him saying the buyer always wins if there is a dispute. Then there is the issue of packing and shipping, assuming it isn't a local sale. But again, if you want the most for it, that's probably going to yield the highest price.
I won't even suggest a value. All I'll say is it ain't gonna be cheap, that's for sure!
#5
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,742
Mentioned: 228 Post(s)
Tagged: 0 Thread(s)
Quoted: 2100 Post(s)
Liked 3,202 Times
in
1,136 Posts
Well...it's worth a lot. That's for sure. All original, provenance, correct components, in really nice condition.
Could be a five figure bike.
As others have mentioned, eBay is the best place to sell, using the auction option.
Do a bunch of social media postings first, to drum up interest: here, Classic Rendezvous, Paceline, Velocipede Salon, Facebook, etc.
Could be a five figure bike.
As others have mentioned, eBay is the best place to sell, using the auction option.
Do a bunch of social media postings first, to drum up interest: here, Classic Rendezvous, Paceline, Velocipede Salon, Facebook, etc.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#6
Senior Member
Join Date: May 2012
Location: Point Reyes Station, California
Posts: 4,610
Bikes: Indeed!
Mentioned: 91 Post(s)
Tagged: 0 Thread(s)
Quoted: 1453 Post(s)
Liked 3,158 Times
in
1,055 Posts
Those are all nice components but you will do better when you market this bike to provide close up photos of the framedetails. Those are what differentiate this bike from a $1,000 bike.
Brent
Brent
__________________
"I have a tendency to meander sometimes." B.G.
"I have a tendency to meander sometimes." B.G.
#7
Senior Member
Join Date: Aug 2015
Posts: 3,335
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 1082 Post(s)
Liked 1,593 Times
in
897 Posts
Just small words of caution, the brake pad holders should be open toward the back. It is possible that braking could push the pad out of the holder when facing forwards.
Likes For Mr. 66:
#8
Senior Member
Join Date: Sep 2019
Location: Cincinnati, OH
Posts: 708
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 186 Post(s)
Liked 458 Times
in
193 Posts
I’ve become paranoid of posting photos with the pads backwards. I have to check half a dozen times before sharing.

#9
Senior Member
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,739
Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 699 Post(s)
Liked 658 Times
in
411 Posts
Beautiful bike !
Shipping it is risky, it won't take much to dent the top tube
and yes, better photos are a must.
Shipping it is risky, it won't take much to dent the top tube
and yes, better photos are a must.
#10
Senior Member
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,195
Mentioned: 43 Post(s)
Tagged: 0 Thread(s)
Quoted: 936 Post(s)
Liked 1,695 Times
in
559 Posts
Seeing as you're in San Diego, maybe you might consider taking it to the Eroica California event in Cayucos in September? You might find an appreciative (and paying) buyer there who you can hand it off to in person.
#11
Newbie
Thread Starter
Frame
Thanks for all the kind/interesting notes and insights everyone! I'll get together with dad and post some more photos of the frame in a couple of days
Be sure to checkout the google link for the extended gallery in the meantime...I could only post a few photos in the forum here. Loving the forum though!

Be sure to checkout the google link for the extended gallery in the meantime...I could only post a few photos in the forum here. Loving the forum though!
Likes For madscycles:
#12
Senior Member
Join Date: Mar 2012
Location: Ocean County, NJ
Posts: 3,040
Bikes: Looking for a Baylis or Wizard in 59-62cm range
Mentioned: 63 Post(s)
Tagged: 0 Thread(s)
Quoted: 373 Post(s)
Liked 324 Times
in
111 Posts
$3 - $5k range would be my guess, maybe more with 2 interested parties outbidding each other. If it were a 60-62 cm size, I would be one of them. A rare beauty for sure.
Likes For Vonruden:
#13
Steel Is Real
This is the kind of bike that could get me in some "overspending" trouble. It is just a tad big, so I suppose I won't have to worry about it. Spectacular bike!
Last edited by slshrflck; 04-11-23 at 02:17 PM.
Likes For slshrflck:
#14
Senior Member
Join Date: Jun 2006
Posts: 19,895
Mentioned: 128 Post(s)
Tagged: 0 Thread(s)
Quoted: 3267 Post(s)
Liked 2,563 Times
in
1,827 Posts
Wizard was a Baylis/ Howard partnership
one cannot attribute authorship to either one.
Brian did the paint if original is about it.
handsome bike.
Mike Howard is around still I think, Brian is not.
To contact Mike ( Michael) try Facebook but do not feel bad if you don't get a response.
value is a challenge I think, while there were only just over100 made... rare does not translate to resale value.
it is a good middle size, that helps.
one cannot attribute authorship to either one.
Brian did the paint if original is about it.
handsome bike.
Mike Howard is around still I think, Brian is not.
To contact Mike ( Michael) try Facebook but do not feel bad if you don't get a response.
value is a challenge I think, while there were only just over100 made... rare does not translate to resale value.
it is a good middle size, that helps.
#15
aged to perfection
Join Date: Jun 2009
Location: PacNW
Posts: 1,533
Bikes: Dinucci Allez 2.0, Richard Sachs, Alex Singer, Serotta, Masi GC, Raleigh Pro Mk.1, Hetchins, etc
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 695 Post(s)
Liked 985 Times
in
531 Posts
to the right person a Wizard is worth $4000 or more, but you have to find that person.
this looks like a very nice bike.
/markp
this looks like a very nice bike.
/markp
#16
Senior Member
Join Date: Jul 2022
Location: Pac NW
Posts: 1,602
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 885 Post(s)
Liked 1,310 Times
in
497 Posts
Honest assessment, coming from someone who looks for bikes they like, and has the means….
$3,000.
number wise, it is rare. They only made 142 1965 ford mustangs with front bench seats, but that does not make it more or less valuable than a bucket seat car.
At that price, both buyer and seller should be happy.
$3,000.
number wise, it is rare. They only made 142 1965 ford mustangs with front bench seats, but that does not make it more or less valuable than a bucket seat car.
At that price, both buyer and seller should be happy.
__________________
"Leave the gun. Take the Colnagos."
"Leave the gun. Take the Colnagos."
Likes For Robvolz:
#17
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,742
Mentioned: 228 Post(s)
Tagged: 0 Thread(s)
Quoted: 2100 Post(s)
Liked 3,202 Times
in
1,136 Posts
In my opinion, also as someone with the interest and the means, that’s way low. I’d never sell mine for that but if an original one like this in my size (which this is) came on the market for that price, would consider it an amazing bargain.
While it is true that rarity does not always result in high valuation (your above example is flawed, but that’s beside the point), in this case it does. The exact total number of Wizards produced is not known, but probably safe to assume it’s less than a hundred…maybe less than eighty. The highest production number frame of which I am personally aware is #51. The total number of known remaining existing examples is much, much lower. Among knowledgeable and high end collectors, the back story/stories alone increase the interest, and therefore the value.
Does it ride any better than any other well-made bike of the same period, or even into the 80’s? No, not really. Should it be considered an art piece? Perhaps, since like Richard Sachs bikes, it was ‘all done by hand’ and to a very high standard of quality workmanship. But the mystique of the story makes a Wizard far more valuable than something like an equally well made (but more available due to higher volume) Sachs or an equally rare (and as nice to ride) Miyata 1200.
While it is true that rarity does not always result in high valuation (your above example is flawed, but that’s beside the point), in this case it does. The exact total number of Wizards produced is not known, but probably safe to assume it’s less than a hundred…maybe less than eighty. The highest production number frame of which I am personally aware is #51. The total number of known remaining existing examples is much, much lower. Among knowledgeable and high end collectors, the back story/stories alone increase the interest, and therefore the value.
Does it ride any better than any other well-made bike of the same period, or even into the 80’s? No, not really. Should it be considered an art piece? Perhaps, since like Richard Sachs bikes, it was ‘all done by hand’ and to a very high standard of quality workmanship. But the mystique of the story makes a Wizard far more valuable than something like an equally well made (but more available due to higher volume) Sachs or an equally rare (and as nice to ride) Miyata 1200.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
Last edited by rccardr; 04-18-23 at 01:28 PM.
Likes For rccardr:
#18
Senior Member
Join Date: Nov 2010
Posts: 3,511
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 585 Post(s)
Liked 611 Times
in
447 Posts
Threads like this are interesting. Lots of good points all around. I'll reiterate my opinion that what the seller needs to do is get the bike into a position where bidders who "just have to have it" are competing against one another. I hope the OP sticks with the thread and lets us know what happens.
#19
Senior Member
Join Date: Jun 2008
Location: Louisville, KY
Posts: 13,477
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 4072 Post(s)
Liked 2,811 Times
in
1,705 Posts
Entering it into a C&V bike show and then saying it is available at the right price, might be a way to draw interest from the right audience.
#20
Senior Member
Join Date: Jun 2006
Posts: 19,895
Mentioned: 128 Post(s)
Tagged: 0 Thread(s)
Quoted: 3267 Post(s)
Liked 2,563 Times
in
1,827 Posts
Threads like this are interesting. Lots of good points all around. I'll reiterate my opinion that what the seller needs to do is get the bike into a position where bidders who "just have to have it" are competing against one another. I hope the OP sticks with the thread and lets us know what happens.
#21
I don't know.
Join Date: May 2003
Location: South Meriden, CT
Posts: 1,846
Bikes: '90 B'stone RB-1, '92 B'stone RB-2, '89 SuperGo Access Comp, '03 Access 69er, '23 Trek 520, '14 Ritchey Road Logic, '09 Kestrel Evoke, '08 Windsor Tourist, '17 Surly Wednesday, '89 Centurion Accordo, '15 CruX, '17 Ridley X-Night
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 267 Post(s)
Liked 677 Times
in
360 Posts
I think the Eroica suggestion would garner the most money. That's your audience with the deepest pockets and longest arms.
#22
Newbie
Thread Starter
Morning friends!
After a hot BTS bidding throw down between private messages and external discussion, my dad decided to part with his beloved Wizard #10 to rack up some fun tickets ($) for his golden years. It went for quite a few thousand to a very proud new owner who my dad is sure will give it a great home and new chapter with lots of TLC. Congrats to you winner winner chicken dinner if you see this post
Thank you all for your kind messages, interest and insights!
See you out there...
Madison & Kent
After a hot BTS bidding throw down between private messages and external discussion, my dad decided to part with his beloved Wizard #10 to rack up some fun tickets ($) for his golden years. It went for quite a few thousand to a very proud new owner who my dad is sure will give it a great home and new chapter with lots of TLC. Congrats to you winner winner chicken dinner if you see this post

Thank you all for your kind messages, interest and insights!
See you out there...
Madison & Kent
Likes For madscycles: