Go Back  Bike Forums > Bike Forums > Mountain Biking
Reload this Page >

Pedals - yes to pins?

Notices
Mountain Biking Mountain biking is one of the fastest growing sports in the world. Check out this forum to discuss the latest tips, tricks, gear and equipment in the world of mountain biking.

Pedals - yes to pins?

Old 02-28-22, 03:56 PM
  #1  
Joecool85
Senior Member
Thread Starter
 
Join Date: Apr 2006
Posts: 116

Bikes: 2005 Giant Rincon

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Pedals - yes to pins?

Hi guys, it's finally time to replace the pedals on my Rincon. After 17 years, 3 rebuilds (tear down, clean, paint, grease), the plastic bodies won't hold the inner bearing cups in place. I've only ever had pedals with metal cages. I'm concerned about pins being even harder on the shins. I'm 36, 160lbs, 5' 10", and ride what I consider to be XC. Fairly fast, aggressive riding, but with little or no jumping and no downhill/extreme stuff.

The two pedals I'm looking at are Foundation Composite Flats (I think these are Jenson house brand, these use pins) and Race Face Ride flats (plastic grips rather than steel pins).

Links for reference:

https://www.jensonusa.com/Foundation...te-Flat-Pedals
https://www.jensonusa.com/Race-Face-...te-Flat-Pedals

Last edited by Joecool85; 02-28-22 at 04:01 PM.
Joecool85 is offline  
Old 02-28-22, 04:35 PM
  #2  
DMC707
Senior Member
 
DMC707's Avatar
 
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,390

Bikes: Too many to list

Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1764 Post(s)
Liked 1,121 Times in 744 Posts
Treat your old soldier to some decent pedals

after riding that long, you havent gone clipless?
DMC707 is offline  
Old 02-28-22, 04:40 PM
  #3  
Joecool85
Senior Member
Thread Starter
 
Join Date: Apr 2006
Posts: 116

Bikes: 2005 Giant Rincon

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by DMC707
Treat your old soldier to some decent pedals

after riding that long, you havent gone clipless?
Pretty sure either I listed will be better than the stock Giant ones. This was a low end bike, only the Boulder and Boulder SE came below it at the time.

And yeah, platforms/flats for me. I like being able to bail in a hurry if things go pear shaped.
Joecool85 is offline  
Old 02-28-22, 08:15 PM
  #4  
Rdmonster69
Shawn of the Dead
 
Join Date: Apr 2021
Posts: 578
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 277 Post(s)
Liked 448 Times in 216 Posts
I'm a fan of pins on my flats. They will scrape ya up but they grip really nice. If ya got thinner soled shoes on you can feel em.
Rdmonster69 is offline  
Old 03-01-22, 04:26 AM
  #5  
SkinGriz
Live not by lies.
 
Join Date: Nov 2020
Posts: 1,306

Bikes: BigBox bikes.

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 860 Post(s)
Liked 784 Times in 582 Posts
Cages aren’t always gentler on legs.

When I was a teenager I cut the back of my leg with the cage of an Odyssey Black Widow. If I remember right the cage was cromo so it was thinner/sharper/grippier than aluminum.

I was wearing shorts and the cut was behind my knee so I could see the wound open and close with every pedal stroke on the way home.

I do think flats with pins have more grip and are more comfortable than caged pedals.
SkinGriz is offline  
Old 03-01-22, 08:16 AM
  #6  
prj71
Senior Member
 
Join Date: Jun 2015
Location: North Central Wisconsin
Posts: 4,601
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 2965 Post(s)
Liked 1,167 Times in 763 Posts
Originally Posted by Joecool85
Pretty sure either I listed will be better than the stock Giant ones. This was a low end bike, only the Boulder and Boulder SE came below it at the time.

And yeah, platforms/flats for me. I like being able to bail in a hurry if things go pear shaped.
Those pins will bit ya!!!

If you want to bail in a hurry I suggest the Time ATAC pedals and 10 degree easy release cleat. I guarantee you will have no problem getting out of them.

https://www.sram.com/en/time-sport/r...levancy&page=1
prj71 is offline  
Old 03-01-22, 01:41 PM
  #7  
Kapusta
Advanced Slacker
 
Kapusta's Avatar
 
Join Date: Feb 2017
Posts: 6,187

Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt

Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2749 Post(s)
Liked 2,516 Times in 1,422 Posts
For flat pedals, go big. As in a large platform. And definitely yes to pins, though they don't have to be super aggressive. My favorite pedal is the Deity Deftrap. Flat pedals (especially affordable composite/plastic ones) have come a long way.

Cycling specific flat pedal shoes (Five-tens, Ride Concepts, etc) make a ton of difference as well.

You will be so happy you ditched the cages for a good flat pedal/shoe combo.
Kapusta is offline  
Likes For Kapusta:
Old 03-04-22, 09:35 AM
  #8  
rumrunn6
Senior Member
 
rumrunn6's Avatar
 
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,528

Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0

Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5219 Post(s)
Liked 3,564 Times in 2,331 Posts
the nice thing about cages or 1/2 clips is you stuff your foot in & fuggedaboutit
1/2 clips give you that speed, brainless foot placement & some foot retention but also allow easy/fast bailout

been experimenting with flats & pins & they are OK. take more time to place the foot exactly where you want it & requires a touch more thinking while riding. feet never slip off
can't imagine using cleated shoes & pedals after stepping in mud, snow or horse droppings

but flats w/o pins? not for me
fwiw - these live on my MTB right now & they seem OK. they were the biggest (left to right) that I could find. here they are w/ extenders but I've since, taken the extender off

ROCKBROS Mountain Bike Pedals Nylon Composite Bearing 9/16" MTB Bicycle Pedals with Wide Flat Platform
rumrunn6 is offline  
Old 03-07-22, 05:01 PM
  #9  
whipnet
Newbie
 
whipnet's Avatar
 
Join Date: Dec 2020
Location: 127.0.0.1
Posts: 60

Bikes: Fat

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Liked 48 Times in 20 Posts
Always pins for me. They might bite, but nothing as bad as an old set of bear traps, especially the Hutch ones. I still have a round dotted scar on my chest from the 80's BMX days.




*
whipnet is offline  
Likes For whipnet:
Old 03-08-22, 09:56 PM
  #10  
Rolla
Guest
 
Join Date: Sep 2020
Posts: 2,888
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1346 Post(s)
Liked 3,269 Times in 1,439 Posts
Pins for me. Big, tall, fresh ones and a new pair of Five-Ten Freeriders, please. Molded pins are useless if your shoes get wet.

I'm a fan of Kona Wah-Wahs, and OneUp Components composites (pictured).

Rolla is offline  
Old 03-08-22, 11:34 PM
  #11  
Russ Roth
Senior Member
 
Join Date: Dec 2019
Location: South Shore of Long Island
Posts: 2,762

Bikes: 2010 Carrera Volans, 2015 C-Dale Trail 2sl, 2017 Raleigh Rush Hour, 2017 Blue Proseccio, 1992 Giant Perigee, 80s Gitane Rallye Tandem

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1073 Post(s)
Liked 999 Times in 710 Posts
Pins all the way. I run dual option pedals, clipless one side and pinned platform on the other, almost never use the clips unless racing. Once or twice the foot has slipped but technique will keep you on them most of the time. That includes jumps and drops, just not been an issue.
Russ Roth is offline  
Old 03-09-22, 12:54 AM
  #12  
3speed
Senior Member
 
Join Date: Aug 2009
Location: Madison, WI
Posts: 3,473
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 363 Post(s)
Liked 28 Times in 22 Posts
I definitely prefer a big pinned platform AL pedal. I find pins to be safer for my legs because my feet don't slip off of them, therefore keeping my shins from getting bashed by the pedal. AL largely because why not go for the non-plastic option. They're nicer and it's better for the environment to stop buying/promoting use of plastic. They'll probably last longer too. My current set is on, probably, 10yrs and I haven't done Anything to them. No signs of them giving up anytime soon. If the bearings eventually go out, they're a common size sealed bearing and I'll buy a couple more for $5.
3speed is offline  
Old 03-09-22, 01:41 PM
  #13  
prj71
Senior Member
 
Join Date: Jun 2015
Location: North Central Wisconsin
Posts: 4,601
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 2965 Post(s)
Liked 1,167 Times in 763 Posts
Originally Posted by Rolla
Pins for me. Big, tall, fresh ones and a new pair of Five-Ten Freeriders, please. Molded pins are useless if your shoes get wet.

I'm a fan of Kona Wah-Wahs, and OneUp Components composites (pictured).

Pins make my shins hurt just looking at them.

I have a pair of five ten free rider high tops for sale if you or anyone else are interested. They are either size 10 or 10.5. I don't remember at the moment.
prj71 is offline  
Old 03-09-22, 04:24 PM
  #14  
Rolla
Guest
 
Join Date: Sep 2020
Posts: 2,888
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1346 Post(s)
Liked 3,269 Times in 1,439 Posts
Originally Posted by prj71
Pins make my shins hurt just looking at them.
Any pedal is gonna hurt if your foot slips off of it; the pins keep your feet where they belong.


Originally Posted by prj71
I have a pair of five ten free rider high tops for sale if you or anyone else are interested. They are either size 10 or 10.5. I don't remember at the moment.
I might be interested if they're 10s, but I'm not sure about the hi-top...
Rolla is offline  
Old 03-10-22, 08:21 AM
  #15  
prj71
Senior Member
 
Join Date: Jun 2015
Location: North Central Wisconsin
Posts: 4,601
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 2965 Post(s)
Liked 1,167 Times in 763 Posts
Originally Posted by Rolla
Any pedal is gonna hurt if your foot slips off of it; the pins keep your feet where they belong.
My feet don't slip off my Time Atac pedals.


I might be interested if they're 10s, but I'm not sure about the hi-top...
The hi-top is nice. Provides a little more protection around the foot area, plus some ankle support.
prj71 is offline  
Old 03-10-22, 10:55 AM
  #16  
2old
Senior Member
 
Join Date: Jul 2014
Location: socal
Posts: 4,219
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 872 Post(s)
Liked 795 Times in 603 Posts
Think of the positive side; by constantly replacing the skin on your shins and other areas of your leg, you're reducing the incidence of skin cancer (don't ask me how I know). Otherwise, IMO, pins are necessary unless you have clips or some other retention system, and those look like a good value.
2old is offline  
Old 03-12-22, 10:48 PM
  #17  
rosefarts
With a mighty wind
 
Join Date: May 2015
Posts: 2,555
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1073 Post(s)
Liked 841 Times in 475 Posts
I rode a somewhat technical 24 mile loop today on flats and 5.tens.

Since 1993/4 ish I’ve ridden flats only one other time, 2 days ago.

So far, I haven’t missed clipless. I’m climbing great (still got the new bike mojo) and descending as well or better than I ever have. I’m not going to switch out my road bikes but for the mountain bike, I’m pretty close to sold on it.
rosefarts is offline  
Old 03-13-22, 09:00 AM
  #18  
Paul Barnard
For The Fun of It
 
Paul Barnard's Avatar
 
Join Date: May 2007
Location: Louisissippi Coast
Posts: 5,844

Bikes: Lynskey GR300, Lynskey Backroad, Litespeed T6, Lynskey MT29, Burley Duet

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 2131 Post(s)
Liked 1,640 Times in 822 Posts
Flats and pins for me. I prefer VP Components VP001. I rode with clipless for a while, but had a couple of get-offs that resulted from my inability to dab as quickly as I needed to. At my age, I don't crash as well as I used to. I have never had pin induced riding injuries. My shins have received character marks when walking my bike.
Paul Barnard is offline  
Old 03-16-22, 12:12 PM
  #19  
Calsun
Banned
 
Join Date: Mar 2021
Posts: 1,280
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 608 Post(s)
Liked 382 Times in 288 Posts
With flat pedals on the trails it does not hurt to wear shin guards of some type. I do not have big feet (10.5 C width) but still found it beneficial to go to a wider pedal, the Stamp 7 in Large that gives me a larger target and allows for more movement of my foot on the pedal.

Pins can be adjusted in height (and a small washer added) and it is not necessary to have a pin in every hole of the pedal. Different approaches as to which pins to leave in, often only the ones at the outer edges of the pedal.
Calsun is offline  
Old 03-16-22, 12:37 PM
  #20  
prj71
Senior Member
 
Join Date: Jun 2015
Location: North Central Wisconsin
Posts: 4,601
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 2965 Post(s)
Liked 1,167 Times in 763 Posts
I rode flats with pins at one time. When things get a little rough your feet will still come off the pedals. My shins are proof of this.
prj71 is offline  
Old 03-16-22, 01:10 PM
  #21  
Bosco13
Newbie
 
Join Date: Jul 2020
Posts: 61
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 14 Post(s)
Likes: 0
Liked 37 Times in 18 Posts
I have both and prefer flats with pins for recreational riding. If I raced XC it would be a different story.
Bosco13 is offline  
Old 03-17-22, 06:47 AM
  #22  
whatshubdoc
Newbie
 
Join Date: Feb 2022
Posts: 19
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time in 1 Post
DMR Vault

If on a budget, RaceFace Chester or One Up (composite body with metal pins).
whatshubdoc is offline  
Old 03-30-22, 12:32 AM
  #23  
SteveInConverse
Member
 
Join Date: Feb 2022
Location: Texas
Posts: 42

Bikes: Trek

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 21 Post(s)
Liked 23 Times in 15 Posts
+1 for the Rock bros. I don't MTB but put them on my FX for better grip coupled with RC Livewire flat pedal shoes is a good combo for me. I have lower leg/foot neuropathy and the pins keep my foot positioned well to where I really don't have to move much. Rock Bros are also the much cheaper alternative to RF Chester's.
SteveInConverse is offline  
Likes For SteveInConverse:
Old 04-01-22, 07:49 PM
  #24  
freetors
Newbie
 
Join Date: Jun 2021
Posts: 59
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 45 Post(s)
Liked 23 Times in 16 Posts
In my experience having really grippy shoes like 5.10s in your pinned flat pedals will greatly reduce the chance of your foot slipping off and mangling your legs.
freetors is offline  
Old 04-02-22, 08:33 AM
  #25  
freeranger
Senior Member
 
freeranger's Avatar
 
Join Date: Jun 2005
Location: Kentucky
Posts: 2,579

Bikes: 06 Lemond Reno, 98 GT Timberline mtn.bike

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 421 Post(s)
Liked 690 Times in 430 Posts
I rode off-road for decades before owning a road bike. Tried clipless, maybe I didn't get the best ones-they were Shimano, model??. DIdn't care for them. Tried flats with pins and even use them on my road bike as well as the mtn.bike now. I use "trail running" shoes, which have "tread blocks" on the bottom. Haven't had a problem with my feet coming off of them.
freeranger is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.