Sorter Reach
#1
Member
Thread Starter
Join Date: Jan 2013
Posts: 41
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Sorter Reach
I'm looking to shorten my reach as I feel a little stretched out on the hoods. I like where the tops of my bar's are so would a shorter reach bar bring the hoods in a little closer
#2
Senior Member
Join Date: May 2005
Location: Queanbeyan, Australia.
Posts: 4,135
Mentioned: 85 Post(s)
Tagged: 0 Thread(s)
Quoted: 3450 Post(s)
Liked 420 Times
in
289 Posts
A shorter stem would be a cheaper and easier alternative than a short reach bar which will be a more expensive and more difficult conversion. However to bring the hood position right back to where the top position is a LONG way so you should consider the bike size and fit overall.
Anthony
Anthony
#3
Member
Thread Starter
Join Date: Jan 2013
Posts: 41
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks for the reply, but to clarify I don't want to move the hoods to where the top of the bars are. I'm fine where the tops are I just want to move the hoods in some. If I went to a shorter stem the tops would be moved also.
#4
Senior Member
Join Date: Jan 2010
Posts: 444
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 8 Times
in
5 Posts
Maybe suggest a trip to your LBS and see what drop bars they have to offer, or can order in. There are a lot of different types and you are sure to find one that will fit you better.
How to Buy Road Bike Drop Bars | Bicycling
How to Buy Road Bike Drop Bars | Bicycling
#5
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
Any info on what bars you have now?
Depending on what your bike has, it may well be possible to install shorter-reach bars to bring the brake levers in. But remember that the whole point of having drop bars is that not all of the contact points are in the same place. Do you use the drops/hooks position at all? If not, it's possible that the bars are just too low, and bringing them up while maintaining the same amount of stem extension would help make all positions more usable, encouraging you to switch around more while riding. The tops position is more for those casual moments when you want to sit up a little, it shouldn't be the favored position.
Depending on what your bike has, it may well be possible to install shorter-reach bars to bring the brake levers in. But remember that the whole point of having drop bars is that not all of the contact points are in the same place. Do you use the drops/hooks position at all? If not, it's possible that the bars are just too low, and bringing them up while maintaining the same amount of stem extension would help make all positions more usable, encouraging you to switch around more while riding. The tops position is more for those casual moments when you want to sit up a little, it shouldn't be the favored position.
#6
Member
Thread Starter
Join Date: Jan 2013
Posts: 41
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Any info on what bars you have now?
Depending on what your bike has, it may well be possible to install shorter-reach bars to bring the brake levers in. But remember that the whole point of having drop bars is that not all of the contact points are in the same place. Do you use the drops/hooks position at all? If not, it's possible that the bars are just too low, and bringing them up while maintaining the same amount of stem extension would help make all positions more usable, encouraging you to switch around more while riding. The tops position is more for those casual moments when you want to sit up a little, it shouldn't be the favored position.
Depending on what your bike has, it may well be possible to install shorter-reach bars to bring the brake levers in. But remember that the whole point of having drop bars is that not all of the contact points are in the same place. Do you use the drops/hooks position at all? If not, it's possible that the bars are just too low, and bringing them up while maintaining the same amount of stem extension would help make all positions more usable, encouraging you to switch around more while riding. The tops position is more for those casual moments when you want to sit up a little, it shouldn't be the favored position.
#7
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
Once you have those installed, I'd recommend trying to do more and more riding in the drops. It really helped me with my flexibility.
#8
Senior Member
I looked up the reach and drop on the Defy bars after test riding one a couple of years back.
Hmmn.
Anyway, if the 3T aren't quite there, you could perhaps look into 125mm drop / 70mm reach bars.
e.g. Shimano pro plt compact, Dimension flat top, Planet X Strada, Cinelli Neos carbon.
Hmmn.
Anyway, if the 3T aren't quite there, you could perhaps look into 125mm drop / 70mm reach bars.
e.g. Shimano pro plt compact, Dimension flat top, Planet X Strada, Cinelli Neos carbon.