Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Headset service cost

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Headset service cost

Old 04-14-20, 09:35 PM
  #1  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,139

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 450 Times in 181 Posts
Headset service cost

Being quarantined I thought it would be a good time to start servicing my bicycles. With the help I've gotten on here I've been able to clean and put new bearings in two of my bikes bottom brackets and wheel hubs. I'm not sure if I want to tackle doing the headsets so I'm wondering what a fair price would be to have a shop do this?
robertj298 is offline  
Old 04-14-20, 09:39 PM
  #2  
bikemig 
Senior Member
 
bikemig's Avatar
 
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,505

Bikes: A bunch of old bikes and a few new ones

Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5877 Post(s)
Liked 3,445 Times in 2,066 Posts
If you can overhaul a bottom bracket and hubs, you can overhaul a headset.
bikemig is offline  
Old 04-14-20, 09:55 PM
  #3  
arex
Abuse Magnet
 
arex's Avatar
 
Join Date: Jun 2012
Location: Colorado
Posts: 1,888

Bikes: '91 Mtn Tek Vertical, '74 Raleigh Sports, '72 Raleigh Twenty, '84 Univega Gran Turismo, '09 Surly Karate Monkey, '92 Burley Rock-n-Roll, '86 Miyata 310, '76 Raleigh Shopper

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 151 Post(s)
Liked 172 Times in 86 Posts
Headsets are easy...easier than a bottom bracket. Go for it.
arex is offline  
Old 04-14-20, 10:03 PM
  #4  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,139

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 450 Times in 181 Posts
Originally Posted by arex
Headsets are easy...easier than a bottom bracket. Go for it.
Maybe I'll give it a try
robertj298 is offline  
Old 04-14-20, 10:09 PM
  #5  
branko_76 
Senior Member
 
branko_76's Avatar
 
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,745

Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 701 Post(s)
Liked 667 Times in 417 Posts
Originally Posted by robertj298
Maybe I'll give it a try
headsets are relatively easy with the proper wrenches. Do you have them?
branko_76 is offline  
Old 04-14-20, 11:11 PM
  #6  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,139

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 450 Times in 181 Posts
Originally Posted by branko_76
headsets are relatively easy with the proper wrenches. Do you have them?
I'm not sure what wrenches I need.
robertj298 is offline  
Old 04-14-20, 11:13 PM
  #7  
branko_76 
Senior Member
 
branko_76's Avatar
 
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,745

Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 701 Post(s)
Liked 667 Times in 417 Posts
Originally Posted by robertj298
I'm not sure what wrenches I need.
Can you post a photo of the headset?
branko_76 is offline  
Old 04-14-20, 11:19 PM
  #8  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,139

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 450 Times in 181 Posts
Originally Posted by branko_76
Can you post a photo of the headset?
I have 2 I would like to do first. Miyata 912 and Specialized Sequoia

robertj298 is offline  
Old 04-14-20, 11:22 PM
  #9  
rgvg
Car free since 2018
 
Join Date: Aug 2017
Location: Vancouver, BC
Posts: 675

Bikes: Mostly japanese ones

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 251 Post(s)
Liked 268 Times in 133 Posts
Headset wrench like these. I think the 32/36mm works for the Sequoia. But not the Miyata.



Last edited by rgvg; 04-14-20 at 11:27 PM.
rgvg is offline  
Old 04-14-20, 11:25 PM
  #10  
branko_76 
Senior Member
 
branko_76's Avatar
 
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,745

Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 701 Post(s)
Liked 667 Times in 417 Posts
The Shimano requires a special set of wrenches that can be found on ebay.

for the other one, you'll need to measure the nuts. They're typically 30, 32 and/or 36mm

for the Shimano

branko_76 is offline  
Old 04-14-20, 11:29 PM
  #11  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,139

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 450 Times in 181 Posts
Originally Posted by rgvg
Headset wrench like these. I think the 32/36mm works for the Sequoia. But not the Miyata.


I have a 32 that fits the Sequoia but the 912 is smaller.
robertj298 is offline  
Old 04-14-20, 11:31 PM
  #12  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,139

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 450 Times in 181 Posts
Originally Posted by branko_76
The Shimano requires a special set of wrenches that can be found on ebay.

for the other one, you'll need to measure the nuts. They're typically 30, 32 and/or 36mm

for the Shimano

Do the Shimano come in different sizes?
robertj298 is offline  
Old 04-14-20, 11:32 PM
  #13  
branko_76 
Senior Member
 
branko_76's Avatar
 
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,745

Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 701 Post(s)
Liked 667 Times in 417 Posts
There is only one size Shimano with the scalloped nuts
branko_76 is offline  
Old 04-14-20, 11:41 PM
  #14  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,139

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 450 Times in 181 Posts
Originally Posted by branko_76
There is only one size Shimano with the scalloped nuts
They are pricey. Can't just use vice grips with a rag around the nut to protect it? lol
robertj298 is offline  
Likes For robertj298:
Old 04-14-20, 11:45 PM
  #15  
branko_76 
Senior Member
 
branko_76's Avatar
 
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,745

Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 701 Post(s)
Liked 667 Times in 417 Posts
I just saw these on ebay, looks custom made and reasonably priced

https://www.ebay.com/itm/Headset-wre...QAAOSwVMFdd7xh

branko_76 is offline  
Likes For branko_76:
Old 04-14-20, 11:48 PM
  #16  
branko_76 
Senior Member
 
branko_76's Avatar
 
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,745

Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 701 Post(s)
Liked 667 Times in 417 Posts
Originally Posted by robertj298
They are pricey. Can't just use vice grips with a rag around the nut to protect it? lol
I'm not laughing.....
branko_76 is offline  
Old 04-15-20, 12:49 AM
  #17  
Chombi1 
Senior Member
 
Chombi1's Avatar
 
Join Date: Nov 2015
Posts: 4,457
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 1629 Post(s)
Likes: 0
Liked 814 Times in 527 Posts
Please oh please don't go the vise-grip route with your poor headsets!
Only philistines would use such tool on a headset!
__________________
72 Line Seeker
83 Davidson Signature
84 Peugeot PSV
84 Peugeot PY10FC
84 Gitane Tour de France.
85 Vitus Plus Carbone 7
86 ALAN Record Carbonio
86 Medici Aerodynamic (Project)
88 Pinarello Montello
89 Bottecchia Professional Chorus SL
95 Trek 5500 OCLV (Project)
Chombi1 is offline  
Old 04-15-20, 04:31 AM
  #18  
Prowler 
Senior Member
 
Join Date: Nov 2013
Location: Near Pottstown, PA: 30 miles NW of Philadelphia
Posts: 2,185

Bikes: 2 Trek Mtn, Cannondale R600 road, 6 vintage road bikes

Mentioned: 83 Post(s)
Tagged: 0 Thread(s)
Quoted: 470 Post(s)
Liked 1,016 Times in 398 Posts
Originally Posted by robertj298
They are pricey. Can't just use vice grips with a rag around the nut to protect it? lol
Glad your laughing about this. I've found that, given the stresses on the HS (rough roads, rail crossings, potholes, curbs, wooden bridges, etc) it's best if you get the lock nut/top nut really tight. Or they loosen during use. Since the flats on the adj nut/top race and the top nut are so thin, there is great risk to the parts if you use loose fitting wrenches, yup you must have two. And since the process of getting them real tight may loosen the bearing clearance (backing the top race out even a degree or two) you'll likely need to do this two or three times until it's just right. IOW using two correct wrenches multiple times each time the HS is serviced.

I trust you have a good metric vernier caliper so you can measure the parts and know what size wrenches you need. Mm?

So, for the hex parts either purchase the right wrenches (you could need two of the same, ex: 36mm, or two sizes) or find a co-op with them. If you buy, buy good ones. Cheap/bargain wrenches will not fit snugly and will bend from the forces you need.

For the Shimano HS either purchase them or see if one of us will loan em. Anyone near by? Put out the call. Great coffee, fresh cinnamon rolls, and a pack of TP as a thanks.
Prowler is offline  
Likes For Prowler:
Old 04-15-20, 04:34 AM
  #19  
Narhay
Senior Member
 
Narhay's Avatar
 
Join Date: Sep 2012
Location: Toronto, ON, Canada
Posts: 3,731
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 956 Post(s)
Liked 568 Times in 314 Posts
I've heard an adjustable wrench on the flats is fine for the scalloped headset nuts.
Narhay is offline  
Old 04-15-20, 04:34 AM
  #20  
Rollfast
What happened?
 
Rollfast's Avatar
 
Join Date: Jun 2007
Location: Around here somewhere
Posts: 8,050

Bikes: 3 Rollfasts, 3 Schwinns, a Shelby and a Higgins Flightliner in a pear tree!

Mentioned: 57 Post(s)
Tagged: 1 Thread(s)
Quoted: 1835 Post(s)
Liked 292 Times in 255 Posts
Originally Posted by robertj298
Maybe I'll give it a try
I can assemble the headset just fine, the BB I needed help with as they took it apart for shipping even after I ASKED them not to. I didn't have the right tools for that.

I believe I do now...
__________________
I don't know nothing, and I memorized it in school and got this here paper I'm proud of to show it.
Rollfast is offline  
Old 04-15-20, 04:49 AM
  #21  
oneclick 
Senior Member
 
Join Date: Feb 2020
Posts: 2,890
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1105 Post(s)
Likes: 0
Liked 1,311 Times in 775 Posts
Originally Posted by robertj298
They are pricey. Can't just use vice grips with a rag around the nut to protect it? lol

Purists will say no.


Practical people will say yes, of course.


There are two issues:

a) will it work (yes)

b) will it mar the headset (not if you are careful)


For b), if possible use a spanner with flat jaws, that fits tightly against the projections of the locknut. Carefully snug it down until it is tight enough not to slip, make sure the spanner is aligned with the locknut (I put use hand around it and feel with fingertips where the spanner grips the nut), and take it off. Especially if all you have is a vise-grip, use a pair of bits of thin ply, soft enough to crush/cushion/grip the locknut. Bits from the boxes satsumas come in are excellent.


Shimano using this type of locknut and cup configuration was the height of hubris[1]. I bought the special spanners when they were cheap, but before that I just used normal ones and care (and grease on the the threads - always. Always. ALWAYS.)


[1] internal cable routing is probably second, but lots frame makers have made that sin, only Shimano would use a birthday cake as a model for a bicycle part.
oneclick is offline  
Old 04-15-20, 05:08 AM
  #22  
SJX426 
Senior Member
 
SJX426's Avatar
 
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,580

Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8

Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1601 Post(s)
Liked 2,187 Times in 1,092 Posts
Is the headset on the Sequoia use loose bearings? It says it is sealed. Does that refer to a seal between the cup and "cone?"
__________________
Bikes don't stand alone. They are two tired.
SJX426 is offline  
Old 04-15-20, 05:11 AM
  #23  
texaspandj
Senior Member
 
texaspandj's Avatar
 
Join Date: Jun 2015
Location: Heart Of Texas
Posts: 4,238

Bikes: '85, '86 , '87 , '88 , '89 Centurion Dave Scott Ironman.

Mentioned: 99 Post(s)
Tagged: 0 Thread(s)
Quoted: 1605 Post(s)
Liked 582 Times in 379 Posts
As my mechanic Uncle Joe used to say, "Proper tools give good results". Which I never fully understood til I met this one girl...uh never mind, a story for different forum.
Back on topic, the '86 Ironman came with that style Headset. I used a rag and huge wrench. It works , but be careful as it doesn't take much to jack it up.
BTW, I ended up replacing that headset with a standard style nut, but if I were you I'd get the correct wrench if I planned on using the star style nut. Because when you overhaul headsets and it can get tricky. Too loose and there's a chance (after many miles) of ruining the headset. Too tight and it's like riding a unicycle and I don't know how to ride a unicycle. But for most DIY wrenchers that's the fun of it. You get it just right and you feel confident about your build. Ultimately you should get the correct tool.

Last edited by texaspandj; 04-15-20 at 05:25 AM.
texaspandj is offline  
Old 04-15-20, 05:21 AM
  #24  
randyjawa 
Senior Member
 
randyjawa's Avatar
 
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,672

Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma

Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1370 Post(s)
Likes: 0
Liked 1,743 Times in 934 Posts
Head sets are easier to work on than bottom bracket and/or wheel hubs, in my opinion. Have a look a Head Set Rebuild and see if that bolsters your confidence. My advice is do it yourself...
__________________
"98% of the bikes I buy are projects".
randyjawa is offline  
Old 04-15-20, 05:23 AM
  #25  
UKFan4Sure
Useless Member
 
Join Date: Jun 2015
Location: Louisville, KY
Posts: 750
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 380 Post(s)
Liked 181 Times in 113 Posts
I've owned several bikes with the scalloped headset nuts. I've never purchased the tool. And I've never buggered them up either. Where there is a will, there's a way.
UKFan4Sure is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.