50s pathracer wheelset -- 27" Sturmey Archer 4 spd
#1
2k miles from the midwest
Thread Starter
Join Date: Feb 2005
Location: Washington
Posts: 1,964
Bikes: ~'75 Colin Laing, '80s Schwinn SuperSport 650b, ex-Backroads ti project...
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 525 Post(s)
Liked 931 Times
in
446 Posts
50s pathracer wheelset -- 27" Sturmey Archer 4 spd
This was in a lot of parts I purchased this spring. I haven't touched them except to remove the rotted tires and wipe them down enough to handle. As found and still somewhat dirty, but appear to be true and spin smoothly.
Rear wheel is an alloy shell Sturmey Archer FM from 1951 laced to an alloy rim (possibly the remnants of a Fiamme sticker) with slightly too short double butted spokes. There is an indicactor chain on one side, the other has a pin that might be tweaked slightly. Front is an unmarked hub with steel barrel and pressed alloy flanges and wingnuts. It's laced to a Joannou alloy rim with a couple obvious replacement spokes.
Sold
Fiamme?
Joannou 27" rim. Made in Italy
Unmarked front hub with wingnuts
Rear wheel is an alloy shell Sturmey Archer FM from 1951 laced to an alloy rim (possibly the remnants of a Fiamme sticker) with slightly too short double butted spokes. There is an indicactor chain on one side, the other has a pin that might be tweaked slightly. Front is an unmarked hub with steel barrel and pressed alloy flanges and wingnuts. It's laced to a Joannou alloy rim with a couple obvious replacement spokes.
Sold
Fiamme?
Joannou 27" rim. Made in Italy
Unmarked front hub with wingnuts
Last edited by Dylansbob; 09-18-21 at 07:05 PM. Reason: sold
#2
Fuji Fan
pm sent. hoping I beat nlerner...
#3
Senior Member
Join Date: Dec 2005
Posts: 17,153
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3806 Post(s)
Liked 6,675 Times
in
2,607 Posts
#5
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,434
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
If these are still floating around, I'm interested as I have a 50s Claud Butler I need to rebuild . . . .
#6
Senior Member
Join Date: Oct 2005
Location: Upper Left, USA
Posts: 1,915
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 634 Post(s)
Liked 444 Times
in
298 Posts