Would you ride on a printed saddle?
#1
Newbie
Thread Starter
Would you ride on a printed saddle?
I've had a lot of saddle pain for the 10 or so years I've been riding.
Tried lots of different saddles.
I've been overweight and very thin - no difference.
I had a pressure mapping, and they were surprised at the amount of pressure I put on the saddle - this was as part of a full fitting, so I was positioned correctly. They said it was the highest value they had seen.
If you had the money (I currently don't) would you buy one?
Tried lots of different saddles.
I've been overweight and very thin - no difference.
I had a pressure mapping, and they were surprised at the amount of pressure I put on the saddle - this was as part of a full fitting, so I was positioned correctly. They said it was the highest value they had seen.
If you had the money (I currently don't) would you buy one?
#2
Flyin' under the radar
I would, though it seems no one makes them narrow enough for me (132mm is about as wide as I can go; 128 to 130 is optimal). They're all 143mm or larger. The technology is pretty neat, and all the folks I've seen that have actually bought them tend to rave about them. Sounds like it'd be worth the shot given your situation.
Likes For RNAV:
#3
-------
Join Date: Jul 2020
Location: Tejas
Posts: 12,790
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 9648 Post(s)
Liked 6,363 Times
in
3,503 Posts
Not only would but did. I have the Fizik Antares Versus EVO R1 Adaptive. It works as advertised. Mine is the 139mm version.
I originally wanted to go the Specialized Power route, but the rails don't play well with my Trek bike.
I originally wanted to go the Specialized Power route, but the rails don't play well with my Trek bike.
Likes For Mojo31:
#4
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,464
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 955 Post(s)
Liked 1,619 Times
in
1,039 Posts
If I had the money would I buy one? Sure... if only to try it out.
It's about time for us to get really into printing our saddles. We could take a 3D scan of our buttox in addition to a pressure point identification device then us an AI program to calculate a suitable seat that could be printed out right there in the shop.
It's about time for us to get really into printing our saddles. We could take a 3D scan of our buttox in addition to a pressure point identification device then us an AI program to calculate a suitable seat that could be printed out right there in the shop.
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
Likes For zandoval:
#5
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,509
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20802 Post(s)
Liked 9,448 Times
in
4,666 Posts
Yes.
Likes For WhyFi:
#6
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,631
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4729 Post(s)
Liked 1,531 Times
in
1,002 Posts
So these aren't actually custom printed to your dimensions, but are off the shelf?
Not quite the same, but some similarities with overall type of construction -- I had a few years ago an interest in the Tioga Spyder designs. Think of them as a poor man's version of these printed versions. I may still want to try these out some day. https://www.tiogausa.com/saddles-main.html
Not quite the same, but some similarities with overall type of construction -- I had a few years ago an interest in the Tioga Spyder designs. Think of them as a poor man's version of these printed versions. I may still want to try these out some day. https://www.tiogausa.com/saddles-main.html
Likes For Sy Reene:
Likes For tempocyclist:
#8
Senior Member
Join Date: Nov 2012
Location: Palm Desert, CA
Posts: 2,504
Bikes: Speedvagen Steel
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 429 Post(s)
Liked 248 Times
in
156 Posts
Yup, I’m fact I’ve tried and still technically own both. Thread below…
the Fizik is with a friend in case he wants to buy it, the Specialized has worked out incredibly well.
https://www.bikeforums.net/road-cycl...ime-again.html
the Fizik is with a friend in case he wants to buy it, the Specialized has worked out incredibly well.
https://www.bikeforums.net/road-cycl...ime-again.html
Likes For robbyville:
#10
-------
Join Date: Jul 2020
Location: Tejas
Posts: 12,790
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 9648 Post(s)
Liked 6,363 Times
in
3,503 Posts
If I had the money would I buy one? Sure... if only to try it out.
It's about time for us to get really into printing our saddles. We could take a 3D scan of our buttox in addition to a pressure point identification device then us an AI program to calculate a suitable seat that could be printed out right there in the shop.
It's about time for us to get really into printing our saddles. We could take a 3D scan of our buttox in addition to a pressure point identification device then us an AI program to calculate a suitable seat that could be printed out right there in the shop.
Likes For Mojo31:
#11
Senior Member
Join Date: May 2021
Location: San Francisco
Posts: 2,032
Bikes: addict, aethos, creo, vanmoof, sirrus, public ...
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1273 Post(s)
Liked 1,384 Times
in
708 Posts
i have both of the specialized ones, on two different bikes. the right fit/size/position/shape is still more important, but once you get that right, it's pretty awesome. manages to be supportive where needed and soft where needed at the same time. the shape of the "power mirror" chafes me a bit where leg meets not-leg... but the romin EVO with mirror, that one is perfection.
Likes For mschwett:
#12
Senior Member
Join Date: May 2021
Posts: 8,374
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 4384 Post(s)
Liked 4,824 Times
in
2,981 Posts
#13
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,027
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22571 Post(s)
Liked 8,918 Times
in
4,152 Posts
Likes For datlas:
#14
Senior Member
Join Date: May 2021
Posts: 8,374
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 4384 Post(s)
Liked 4,824 Times
in
2,981 Posts
I've had a lot of saddle pain for the 10 or so years I've been riding.
Tried lots of different saddles.
I've been overweight and very thin - no difference.
I had a pressure mapping, and they were surprised at the amount of pressure I put on the saddle - this was as part of a full fitting, so I was positioned correctly. They said it was the highest value they had seen.
If you had the money (I currently don't) would you buy one?
Tried lots of different saddles.
I've been overweight and very thin - no difference.
I had a pressure mapping, and they were surprised at the amount of pressure I put on the saddle - this was as part of a full fitting, so I was positioned correctly. They said it was the highest value they had seen.
If you had the money (I currently don't) would you buy one?
Likes For PeteHski:
#15
Senior Member
Join Date: Apr 2021
Posts: 4,083
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 2332 Post(s)
Liked 2,097 Times
in
1,314 Posts
I've had a lot of saddle pain for the 10 or so years I've been riding.
Tried lots of different saddles.
I've been overweight and very thin - no difference.
I had a pressure mapping, and they were surprised at the amount of pressure I put on the saddle - this was as part of a full fitting, so I was positioned correctly. They said it was the highest value they had seen.
If you had the money (I currently don't) would you buy one?
https://www.youtube.com/watch?v=k48UM6xFDrE
Tried lots of different saddles.
I've been overweight and very thin - no difference.
I had a pressure mapping, and they were surprised at the amount of pressure I put on the saddle - this was as part of a full fitting, so I was positioned correctly. They said it was the highest value they had seen.
If you had the money (I currently don't) would you buy one?
https://www.youtube.com/watch?v=k48UM6xFDrE
Have you tried a full leather saddle like a Brooks or Berthoud? If so, did you give it time to break in? Such a saddle will conform to your shape. Add good bibs and lube, and you should be GTG. Is your pain pressure or chafing? Or both?
#16
Newbie
Thread Starter
I haven't tried one.
I tried a couple pair of high end Assos, and usually use chamois creme.
Pressure
I tried a couple pair of high end Assos, and usually use chamois creme.
Pressure
#17
Senior Member
Join Date: Apr 2021
Posts: 4,083
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 2332 Post(s)
Liked 2,097 Times
in
1,314 Posts
If the pressure is on your sit bones, you might consider trying a Brooks or Berthoud saddle. The leather will eventually conform to your unique shape and therefore disperse the pressure over a much wider area than other saddles, sort of like having a custom printed saddle except your butt is the printer.
Likes For GhostRider62:
#18
Senior Member
Join Date: Feb 2018
Posts: 786
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 338 Post(s)
Liked 408 Times
in
252 Posts
Leather tensioned saddles are overrated in my experience. I tossed one in the bin after 12000km and went to Specialized saddles (Power on road and gravel, Sitero on TT bike). All day comfort, even riding in an aggressive position in the drops (cutout ftw) and light to boot.
Imo, if the problem is pressure and it won't go away and you need a narrow saddle on top, lower the saddle.
Imo, if the problem is pressure and it won't go away and you need a narrow saddle on top, lower the saddle.
Last edited by Branko D; 03-28-22 at 12:32 PM.
Likes For Branko D:
#19
Senior Member
Join Date: Apr 2021
Posts: 4,083
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 2332 Post(s)
Liked 2,097 Times
in
1,314 Posts
And I tossed every Spesh saddle I have bought.
If leather saddles are so overrated, why are they so common amongst long distance riders. (?)
OP should also verify that saddle height isn't too high
If leather saddles are so overrated, why are they so common amongst long distance riders. (?)
OP should also verify that saddle height isn't too high
Likes For GhostRider62:
#20
Senior Member
Join Date: Feb 2018
Posts: 786
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 338 Post(s)
Liked 408 Times
in
252 Posts
Fashion, to a degree. They undoubtedly work for some, but for me personally they are no more comfortable.
The local randonneur community is pretty big on Infinity saddles (I got one for my wife, too), and I know lots of long distance riders who rock conventional saddles and have no issues with them.
The local randonneur community is pretty big on Infinity saddles (I got one for my wife, too), and I know lots of long distance riders who rock conventional saddles and have no issues with them.
Likes For Branko D:
#21
Asleep at the bars
Join Date: May 2006
Location: San Francisco, CA and Treasure Island, FL
Posts: 1,743
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 234 Post(s)
Liked 203 Times
in
135 Posts
Absolutely. Especially if combined with a professional fitting!
__________________
"This 7:48 cycling session burned 5933 calories. Speed up recovery by replacing them with a healthy snack." - Whoop
"This 7:48 cycling session burned 5933 calories. Speed up recovery by replacing them with a healthy snack." - Whoop
Likes For sfrider:
#22
Asleep at the bars
Join Date: May 2006
Location: San Francisco, CA and Treasure Island, FL
Posts: 1,743
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 234 Post(s)
Liked 203 Times
in
135 Posts
Fashion, to a degree. They undoubtedly work for some, but for me personally they are no more comfortable.
The local randonneur community is pretty big on Infinity saddles, and I know lots of long distance riders who rock conventional saddles and have no issues with them.
The local randonneur community is pretty big on Infinity saddles, and I know lots of long distance riders who rock conventional saddles and have no issues with them.
__________________
"This 7:48 cycling session burned 5933 calories. Speed up recovery by replacing them with a healthy snack." - Whoop
"This 7:48 cycling session burned 5933 calories. Speed up recovery by replacing them with a healthy snack." - Whoop
Likes For sfrider:
#23
Senior Member
Join Date: Jan 2013
Posts: 2,674
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 567 Post(s)
Liked 562 Times
in
405 Posts
I likely will as I got a cheap Chinese nock off of the design on a nice frame and was very surprised by the reasonably comfortable miles spent getting the bike built up and tuned. It is silly to claim this or that saddle is over rated, every body is different. With nearly 70 years on bikes, maybe 20 or more saddles in the shop and maybe 100 bicycles coming and going over the years I am a suspension Selle Anatomica guy as they always work for me, with the exception of their rubber version.
#24
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,604
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10947 Post(s)
Liked 7,473 Times
in
4,181 Posts
I would, though it seems no one makes them narrow enough for me (132mm is about as wide as I can go; 128 to 130 is optimal). They're all 143mm or larger. The technology is pretty neat, and all the folks I've seen that have actually bought them tend to rave about them. Sounds like it'd be worth the shot given your situation.
#25
-------
Join Date: Jul 2020
Location: Tejas
Posts: 12,790
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 9648 Post(s)
Liked 6,363 Times
in
3,503 Posts
I'm a skinny assed dude. My printed saddle is a 139.