What Is Your Longest Running Back Burner Project?
#26
Senior Member
Join Date: Aug 2009
Posts: 2,388
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1557 Post(s)
Liked 1,733 Times
in
973 Posts
Or as I call it in my annual reviews at work- 'long term projects'
This Battaglin I bought mid 2020. I got clincher rims built for it but somehow other bikes always got ahead of it in the project pipelines. After the KHS is sorted I promise I'll get to this puppy!
This Battaglin I bought mid 2020. I got clincher rims built for it but somehow other bikes always got ahead of it in the project pipelines. After the KHS is sorted I promise I'll get to this puppy!
#27
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,446
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,103 Times
in
1,367 Posts
I'm always hoping one day I'll wake up tall enough to fit my Dad's Paramount because I'm definitely never selling it
__________________
Genesis 49:16-17
Genesis 49:16-17
#29
Senior Member
Join Date: May 2022
Location: USA - Southwest PA
Posts: 3,067
Bikes: Cannondale - Gary Fisher - Giant - Litespeed - Schwinn Paramount - Schwinn (lugged steel) - Trek OCLV
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1395 Post(s)
Liked 1,870 Times
in
1,075 Posts
longest running back burner ...
Cannondale 3.0 frame - sat since mid-90’s when I pulled the components
hoping to give it some love in the next few years
#30
Senior Member
Join Date: May 2022
Location: USA - Southwest PA
Posts: 3,067
Bikes: Cannondale - Gary Fisher - Giant - Litespeed - Schwinn Paramount - Schwinn (lugged steel) - Trek OCLV
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1395 Post(s)
Liked 1,870 Times
in
1,075 Posts
runner up long running back burner projects
two bmx frames - DB Turbolite and Schwinn Pro Modified ... they’ve sat untouched since mid 2000’s
Schwinn Tempo road bike acquired from a bike messenger mid 2000’s
the Giant ATX 760 sat in that spot after it was acquired in the late 1990’s and sat untouched until this November
at one point I thought it would remain in that state - but recently found a wheelset, crank, and derailleurs for it and it was rescued this month
#31
Senior Member
Join Date: May 2022
Location: USA - Southwest PA
Posts: 3,067
Bikes: Cannondale - Gary Fisher - Giant - Litespeed - Schwinn Paramount - Schwinn (lugged steel) - Trek OCLV
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1395 Post(s)
Liked 1,870 Times
in
1,075 Posts
rescued ATX 760
#32
Senior Member
Join Date: May 2022
Location: USA - Southwest PA
Posts: 3,067
Bikes: Cannondale - Gary Fisher - Giant - Litespeed - Schwinn Paramount - Schwinn (lugged steel) - Trek OCLV
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1395 Post(s)
Liked 1,870 Times
in
1,075 Posts
current back burner project in process
Schwinn Paramount PDG90
this frame sat untouched since late 90’s (until this month)
also had doubts I would get to this one
#33
Senior Member
Join Date: Mar 2013
Location: Maryland
Posts: 3,799
Bikes: Lots of English 3-speeds, a couple of old road bikes, 3 mountain bikes, 1 hybrid, and a couple of mash-ups
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 335 Times
in
225 Posts
Miyata 1000. It's like fusion power - the bike of the future, and always will be.
Likes For dweenk:
#34
Senior Member
Join Date: Aug 2015
Posts: 3,292
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 1140 Post(s)
Liked 1,736 Times
in
957 Posts
The '64 was finally cobbled together, still will get different brake levers before bartape
As much as I want to be done on the Performance it (I) needs a different stem. Right now it has a 80mm Frog.
These were both about 5 years, more on the Bianchi
As much as I want to be done on the Performance it (I) needs a different stem. Right now it has a 80mm Frog.
These were both about 5 years, more on the Bianchi
#35
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,858
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,923 Times
in
1,491 Posts
Getting in fighting shape again
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Likes For Bianchigirll:
#36
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,434
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
I've had this 70s era Mercier 300 in kelly green now for around 4 years. The first pic is a shot of the bike in the wild; the second is after I stripped it down but before I cleaned up the paint a bit. I did find the headset part I need which was no easy thing since this is a low stack french threaded Stronglight headset. I actually started a build thread in 2021 to get myself motivated but I still haven't made any progress. But there's always 2023, right?
2 years to finish up a build thread?
https://www.bikeforums.net/classic-v...ld-thread.html
Bike as found in the wild
Frame
2 years to finish up a build thread?
https://www.bikeforums.net/classic-v...ld-thread.html
Bike as found in the wild
Frame
#37
Senior Member
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,245
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 634 Post(s)
Liked 1,277 Times
in
607 Posts
It may have been long enough since I posted this one that maybe most will have forgotten it but if not I'll bore you with it yet again. I picked up this NOS 1982 Fuji Monterey frameset off Ebay on Oct. 20, 2013, the seller was a retired bike shop owner and this was from his leftover inventory so I see myself as technically the "original owner". It's still in the box, I know the Monterey was pretty far down the ladder but having owned several lower level Fujis of the same period I know it will be a nice ride so I'm building it up to suit myself and I've been picking up NOS parts for it to build an upscaled version. I'm just about done collecting components, I just need the "right" saddle. I have NOS Fuji pantograh Suntour Vx derailluers, DiaCompe brakes and I believe my NOS stem probably came out of this bike or one like it. I hesitated on a NOS FUJI pantographed crankset and it got away so I had to settle for a near mint used one and forget finding NOS wheels so I went with a SunRingle M13 rims and stainless spokes on Origin 8 freewhel hubs wheelset as they at least look the part. I also have NOS Suntour barcons and GranCompe aero levers that "may" find their way on it, the jury is still out on those but it's leaning that way. The frameset came with the original headset and BB. He was selling several NOS Fujis, framesets and parts back then, then it all disappeared from Ebay. The framesets resurfaced a year or so later from a different seller halfway across the country less the headsets and bottom brackets for twice as much and the headsets and bottom brackets sold seperately. In retrospect paying "too much" for mine turned out to be a bargain if that's what you wanted. As it was I started out in the hole with this one so I just kept digging LOL. WTH, can't take it with you, might as well enjoy it. I'll finally start putting it together this Spring, maybe I can get it done before Oct. 20, 2023.
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
Last edited by Murray Missile; 12-17-22 at 02:31 PM.
#38
Senior Member
Join Date: Dec 2005
Posts: 17,153
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3806 Post(s)
Liked 6,674 Times
in
2,607 Posts
When I first saw this thread, I was patting myself on the back for not letting any project languish for any length of time. But then I remembered this one:
This single-speed Columbia middleweight with coaster-brake was actually my go-to bike when I lived in the SF Bay Area in the 1980s. I bought it in a thrift store for something like $15, and just found that its geometry and "planing" really worked well for me. It was my grocery getter (hence the rear Blackburn rack), commuter, and weekend road rider (I commonly took it on the Portola Valley loop out of Palo Alto for those who know the area). When I returned to that area for six weeks in the summer of 1991, it's the bike I brought with me. The first year we moved to the Boston area in 1992, we were in a 3rd-floor apartment without room for bikes, so I stored it at a friend's house. When I retrieved it about a year later, I was sad to see that the headset and fork steerer both had a big crack in them. Yikes! Not sure how that happened. I sourced a fork from a local shop, but had a dickens of a time trying to fit it with a headset. What I realized a few years later was that it was a Raleigh replacement fork (note the fork crown dimples) with 26 tpi, which didn't take kindly to the 24 tpi headset nut I was trying to install. Essentially, I just shoved it in a corner of my basement and thought wistfully about it now and then. I pulled it out for the pics above probably 20 years ago, but that's been it. So, yeah, this project has been on hold for more than 30 years. Yikes!
This single-speed Columbia middleweight with coaster-brake was actually my go-to bike when I lived in the SF Bay Area in the 1980s. I bought it in a thrift store for something like $15, and just found that its geometry and "planing" really worked well for me. It was my grocery getter (hence the rear Blackburn rack), commuter, and weekend road rider (I commonly took it on the Portola Valley loop out of Palo Alto for those who know the area). When I returned to that area for six weeks in the summer of 1991, it's the bike I brought with me. The first year we moved to the Boston area in 1992, we were in a 3rd-floor apartment without room for bikes, so I stored it at a friend's house. When I retrieved it about a year later, I was sad to see that the headset and fork steerer both had a big crack in them. Yikes! Not sure how that happened. I sourced a fork from a local shop, but had a dickens of a time trying to fit it with a headset. What I realized a few years later was that it was a Raleigh replacement fork (note the fork crown dimples) with 26 tpi, which didn't take kindly to the 24 tpi headset nut I was trying to install. Essentially, I just shoved it in a corner of my basement and thought wistfully about it now and then. I pulled it out for the pics above probably 20 years ago, but that's been it. So, yeah, this project has been on hold for more than 30 years. Yikes!
Last edited by nlerner; 12-17-22 at 02:52 PM.
Likes For nlerner:
#39
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,434
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
When I first saw this thread, I was patting myself on the back for not letting any project languish for any length of time. But then I remembered this one:
snip . . .
This single-speed Columbia middleweight with coaster-brake was actually my go-to bike when I lived in the SF Bay Area in the 1980s. I bought it in a thrift store for something like $15, and just found that its geometry and "planing" really worked well for me. It was my grocery getter (hence the rear Blackburn rack), commuter, and weekend road rider (I commonly took it on the Portola Valley loop out of Palo Alto for those who know the area). When I returned to that area for six weeks in the summer of 1991, it's the bike I brought with me. The first year we moved to the Boston area in 1992, we were in a 3rd-floor apartment without room for bikes, so I stored it at a friend's house. When I retrieved it about a year later, I was sad to see that the headset and fork steerer both had a big crack in them. Yikes! Not sure how that happened. I sourced a fork from a local shop, but had a dickens of a time trying to fit it with a headset. What I realized a few years later was that it was a Raleigh replacement fork (note the fork crown dimples) with 26 tpi, which didn't take kindly to the 24 tpi headset nut I was trying to install. Essentially, I just shoved it in a corner of my basement and thought wistfully about it now and then. I pulled it out for the pics above probably 20 years ago, but that's been it. So, yeah, this project has been on hold for more than 30 years. Yikes!
snip . . .
This single-speed Columbia middleweight with coaster-brake was actually my go-to bike when I lived in the SF Bay Area in the 1980s. I bought it in a thrift store for something like $15, and just found that its geometry and "planing" really worked well for me. It was my grocery getter (hence the rear Blackburn rack), commuter, and weekend road rider (I commonly took it on the Portola Valley loop out of Palo Alto for those who know the area). When I returned to that area for six weeks in the summer of 1991, it's the bike I brought with me. The first year we moved to the Boston area in 1992, we were in a 3rd-floor apartment without room for bikes, so I stored it at a friend's house. When I retrieved it about a year later, I was sad to see that the headset and fork steerer both had a big crack in them. Yikes! Not sure how that happened. I sourced a fork from a local shop, but had a dickens of a time trying to fit it with a headset. What I realized a few years later was that it was a Raleigh replacement fork (note the fork crown dimples) with 26 tpi, which didn't take kindly to the 24 tpi headset nut I was trying to install. Essentially, I just shoved it in a corner of my basement and thought wistfully about it now and then. I pulled it out for the pics above probably 20 years ago, but that's been it. So, yeah, this project has been on hold for more than 30 years. Yikes!
Likes For bikemig:
#40
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,633
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4678 Post(s)
Liked 5,793 Times
in
2,280 Posts
eBay France is my weakness. Bought this one in 2015.
Found decals for it, and even found some proper racks and fenders.
Found decals for it, and even found some proper racks and fenders.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#41
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,945
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 116 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,908 Times
in
1,139 Posts
I started the clean your shop for the 2019 covid challenge. Just finished the work bench today a mere 4 years later. The before and after:
The spare Campy drawer at the beginning of the challenge. It has been cleared and looks like a tool box drawer again.
The bench before today. That crank went on a bike that went to WGB and got held in captivity for almost a year during the lock-down at the border.
The work bench with way too many items on it. Does anyone see the 8mm wrench anywhere?
Today the bench is clear. It likely won't stay this way for long, but it is a start for the new year.
The spare Campy drawer at the beginning of the challenge. It has been cleared and looks like a tool box drawer again.
The bench before today. That crank went on a bike that went to WGB and got held in captivity for almost a year during the lock-down at the border.
The work bench with way too many items on it. Does anyone see the 8mm wrench anywhere?
Today the bench is clear. It likely won't stay this way for long, but it is a start for the new year.
Last edited by Mad Honk; 12-18-22 at 08:34 PM.
Likes For Mad Honk:
#42
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,846
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2297 Post(s)
Liked 2,054 Times
in
1,254 Posts
I pitched this as a clunker challenge around 2006 but never followed through. The Dunelt frame was found on garbage day with little to no paint or decals...just the cool headbadge for provenance.
Sad thing is I built it as a two speed, loved it, but tore it apart to paint it. It remains untouched with primer. Badge on the left suggests pre-war.
Sad thing is I built it as a two speed, loved it, but tore it apart to paint it. It remains untouched with primer. Badge on the left suggests pre-war.
#44
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,034
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4510 Post(s)
Liked 6,377 Times
in
3,667 Posts
I started the clean your shop for the 2019 covid challenge. Just finished the work bench today a mere 4 years later. The before and after:
The spare Campy drawer at the beginning of the challenge. It has been cleared and looks like a tool box drawer again.
The work bench wit way too many items on it. Does anyone see the 8mm wrench anywhere?
Today the bench is clear. It likely won't stay this way for long, but it is a start for the new year.
The spare Campy drawer at the beginning of the challenge. It has been cleared and looks like a tool box drawer again.
The work bench wit way too many items on it. Does anyone see the 8mm wrench anywhere?
Today the bench is clear. It likely won't stay this way for long, but it is a start for the new year.
#45
PeopleCode delaminator
How about a bike that's been on the back burner twice?
I found this Schwinn Hydraglide at a thrift shop 13 years ago. It took me a little over a year to get around to replacing a few spokes on the rear wheel and fixing the brakes. Ended up giving it to a neighbor kid who rode several sets of tires into tatters on it.
He gave it back to me a few years ago when he went off to college. I haven't done anything with it yet. It's behind several other bikes in the project pile.
I found this Schwinn Hydraglide at a thrift shop 13 years ago. It took me a little over a year to get around to replacing a few spokes on the rear wheel and fixing the brakes. Ended up giving it to a neighbor kid who rode several sets of tires into tatters on it.
He gave it back to me a few years ago when he went off to college. I haven't done anything with it yet. It's behind several other bikes in the project pile.
#46
Steel is real
Join Date: May 2016
Location: Stockholm, Sweden
Posts: 1,105
Bikes: 40 - accumulated over 40 years
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 375 Post(s)
Liked 1,081 Times
in
303 Posts
Bought in a shopping spree between 2009 and 2011. Still lingering in the back of the work shop for their turn.
60ies Specialissima. Gave it new chrome some years ago
Centenario - not going to be restored to original. A fun project with some twists awaiting
1973 Colnago Super
The red De Rosa Professional (the other one is already built)
Merckx cyclocross
MX Leader in colour code "TAL"
Pogliaghi Italcorse (circa 1977) - someone had hacksawed the shifter bosses...
I do have things to do - I am in no hurry but looking forward to it!
60ies Specialissima. Gave it new chrome some years ago
Centenario - not going to be restored to original. A fun project with some twists awaiting
1973 Colnago Super
The red De Rosa Professional (the other one is already built)
Merckx cyclocross
MX Leader in colour code "TAL"
Pogliaghi Italcorse (circa 1977) - someone had hacksawed the shifter bosses...
I do have things to do - I am in no hurry but looking forward to it!
Likes For styggno1:
#47
minimalist cyclist
Join Date: Mar 2014
Location: North Carolina
Posts: 1,745
Bikes: yes please
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1119 Post(s)
Liked 1,641 Times
in
944 Posts
I documented in much detail my longest running project from 2014 just recently, and as mentioned it's still not completely done
https://www.bikeforums.net/classic-v...e-edition.html
I want to transfer the current handlebars & brakes on the Fuji S10-S to this Shogun Primo Sport that's also several years old now. Another paint project with plenty of cure time
original after sanding
1st paint coat was red oxide primer I didn't get photos of
2nd coat is a green base coat...
....because I wasn't sure if I'd have enough of my color choice - metallic turquoise
After Red w Black outline Shogun decals there will be a clearcoat - 3 layers of paint + sealer ... I shouldn't have to worry about rust
================================================================================================
All those projects will line up behind the $25 Torpado find that was just too good of a deal to let pass. All I've done to date is remove the dork disk & freewheel. I am the reluctant mechanic
https://www.bikeforums.net/classic-v...e-edition.html
I want to transfer the current handlebars & brakes on the Fuji S10-S to this Shogun Primo Sport that's also several years old now. Another paint project with plenty of cure time
original after sanding
1st paint coat was red oxide primer I didn't get photos of
2nd coat is a green base coat...
....because I wasn't sure if I'd have enough of my color choice - metallic turquoise
After Red w Black outline Shogun decals there will be a clearcoat - 3 layers of paint + sealer ... I shouldn't have to worry about rust
================================================================================================
All those projects will line up behind the $25 Torpado find that was just too good of a deal to let pass. All I've done to date is remove the dork disk & freewheel. I am the reluctant mechanic
Likes For Deal4Fuji:
#48
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,502
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,460 Times
in
1,432 Posts
I feel like none of my bikes is ever finished. But to answer, I should use start time until decently rideable time. I guess the bike that took the longest time is my Raleigh International. Folks here even teased me about it. A few years ago, I dismantled it to overhaul it. I managed to overhaul it but I didn't install the dynamo lights or rack back on because the rack is a huge pain. I've been riding it that way.
I've come to decide that the handlebars are no good for me. They look so cool but they're not comfortable and only offer two positions. I don't know what to try next.
With lights and rack
Without lights or rack
I've come to decide that the handlebars are no good for me. They look so cool but they're not comfortable and only offer two positions. I don't know what to try next.
With lights and rack
Without lights or rack
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#49
Senior Member
I feel like none of my bikes is ever finished. But to answer, I should use start time until decently rideable time. I guess the bike that took the longest time is my Raleigh International. Folks here even teased me about it. A few years ago, I dismantled it to overhaul it. I managed to overhaul it but I didn't install the dynamo lights or rack back on because the rack is a huge pain. I've been riding it that way.
I've come to decide that the handlebars are no good for me. They look so cool but they're not comfortable and only offer two positions. I don't know what to try next.
With lights and rack
Without lights or rack
I've come to decide that the handlebars are no good for me. They look so cool but they're not comfortable and only offer two positions. I don't know what to try next.
With lights and rack
Without lights or rack
#50
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,265
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,205 Times
in
701 Posts
My Mercian spent the longest time dormant because I wanted to do something about the distressed paint before building it up. Between life, work, and other bikes/wheels/parts, it took a long time to get the frame where I wanted it before hanging components. I bought the frame in 2018 and didn’t have it roadworthy until earlier this year. So far, so good.
Likes For noobinsf: