Are Japanese bikes junk? Or, how I learned to stop worrying and love all bikes
#1
Senior Member
Thread Starter
Join Date: Oct 2005
Location: Upper Left, USA
Posts: 1,915
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 634 Post(s)
Liked 444 Times
in
298 Posts
Are Japanese bikes junk? Or, how I learned to stop worrying and love all bikes
Man, that Robert guy really knows how to start a thread!
In the interest of having a nuanced conversation that starts out with the assumption that we can all appreciate a good or even a low end bike from any country, I'd like to know what you all think are the highest end and lowest end of a country's bikes. Japan, USA, Italy, France and England come to mind as the obvious targets, but perhaps also Switzerland, any of the Nordics. Maybe even Taiwan made bikes in a large enough range in the C&V era to be considered.
I'll start.
Japanese High End:
Zunow
C.S. Hirose
Konno/3 Rensho
Cherubim
Japanese Low End:
Royce Union
Kabukis
C. Itoh
Any of the millions of entry level or bike boom bike from mass manufacturers.
In the interest of having a nuanced conversation that starts out with the assumption that we can all appreciate a good or even a low end bike from any country, I'd like to know what you all think are the highest end and lowest end of a country's bikes. Japan, USA, Italy, France and England come to mind as the obvious targets, but perhaps also Switzerland, any of the Nordics. Maybe even Taiwan made bikes in a large enough range in the C&V era to be considered.
I'll start.
Japanese High End:
Zunow
C.S. Hirose
Konno/3 Rensho
Cherubim
Japanese Low End:
Royce Union
Kabukis
C. Itoh
Any of the millions of entry level or bike boom bike from mass manufacturers.
Likes For tricky:
#2
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,982
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4944 Post(s)
Liked 8,084 Times
in
3,825 Posts
My '77 Nishiki ONP. Not as "boutique" as some of the ones you listed, but definitely a long way from junk.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
Likes For Eric F:
#3
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,917
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1800 Post(s)
Liked 2,334 Times
in
1,378 Posts
I thought Kabukis were Bridgestones?? Quick Reply
#4
Senior Member
Join Date: Dec 2015
Location: Menomonee Falls, WI
Posts: 1,833
Bikes: 1984 Schwinn Supersport, 1988 Trek 400T, 1977 Trek TX900, 1982 Bianchi Champione del Mondo, 1978 Raleigh Supercourse, 1986 Trek 400 Elance, 1991 Waterford PDG OS Paramount, 1971 Schwinn Sports Tourer, 1985 Trek 670
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 604 Post(s)
Liked 1,063 Times
in
535 Posts
I thought Kabukis were Bridgestones?? Quick Reply
Tim
Last edited by tkamd73; 12-13-21 at 03:19 PM.
Likes For BFisher:
#6
Full Member
Here's a pretty up-to-date list of Japanese frame builders, with links. The great majority work in steel. I'd have more confidence riding a steel (or titanium or alumin(i)um) frame made by any of them than riding an expensive carbon fibre frame emblazoned with just about any brand name; whether their "end" is high or low doesn't concern me. Of course the list doesn't cover a considerable number of defunct brands: Amuna, Iribe, Reminton, etc.
#7
Senior Member
Join Date: Jan 2019
Location: Toledo Ohio
Posts: 1,494
Bikes: 1964 Huffy Sportsman, 1972 Fuji Newest, 1973 Schwinn Super Sport (3), 1982 Trek 412, 1983 Trek 700, 1989 Miyata 1000LT, 1991 Bianchi Boardwalk, plus others
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 582 Post(s)
Liked 697 Times
in
393 Posts
I’m hoping my project 72 Fuji Newest that I am working on at least gets to mid-upper tier on vintage Japanese.
#8
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,982
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4944 Post(s)
Liked 8,084 Times
in
3,825 Posts
@Eric F
That is one handsome machine!
That is one handsome machine!
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
#9
Senior Member
Thread Starter
Join Date: Oct 2005
Location: Upper Left, USA
Posts: 1,915
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 634 Post(s)
Liked 444 Times
in
298 Posts
Yes, I wasn't clear in my description, but I wasn't trying to be comprehensive in my list. Definitely a ton of high quality stuff from Japan and most manufacturers make bikes on the full spectrum; Fuji, Univega, Panasonic, Kabuki, et al
#10
Master Parts Rearranger
Join Date: Mar 2015
Location: Portlandia's Kuiper Belt, OR
Posts: 4,403
Bikes: 1982 Trek 720 - 1985 Trek 620 - 1984 Trek 620 - 1980 Trek 510 - Other luminaries past and present
Mentioned: 221 Post(s)
Tagged: 0 Thread(s)
Quoted: 1556 Post(s)
Liked 2,024 Times
in
989 Posts
Then there are all the full-line Japanese manufactures (Fuji et al) that offered everything. In my experience, even the low-end Fujis ride or certainly handle very nicely, and I am putting my money where my mouth is on that with a very large, very heavy (frameset), and very mid-range del Rey and it's a great bike. I even purposefully kept the narrow (at the hoods, wider in the drops) 37cm bars because that contributed to the way it steered and I liked the way it did so on the original test ride (before getting overhauled and upgraded).
#11
Senior Member
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,142
Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 677 Post(s)
Liked 459 Times
in
182 Posts
I have to admit my threads on French and Italian bikes were worded badly. I'm sure there are great vintage bikes that were made there
and other countries but I'll admit that I am a cheapskate but I like a quality product. I have owned probably 10 Japanese vintage bikes. All were mid to upper tier
bikes. All were in excellent+ condition needing only basic service and parts. All were bought between $100 and $300. I honestly don't
believe I could find the same quality French or Italian bike for close to that price. I am the same way with automobiles I have owned 4 Toyotas and 3
Hondas over the years. All have gone between 200-300 thousand miles with very few repairs or issues. Are there better German and Italian made cars
,probably . Will they be more or even as reliable? probably not. Can I afford one? defiantly not lol
and other countries but I'll admit that I am a cheapskate but I like a quality product. I have owned probably 10 Japanese vintage bikes. All were mid to upper tier
bikes. All were in excellent+ condition needing only basic service and parts. All were bought between $100 and $300. I honestly don't
believe I could find the same quality French or Italian bike for close to that price. I am the same way with automobiles I have owned 4 Toyotas and 3
Hondas over the years. All have gone between 200-300 thousand miles with very few repairs or issues. Are there better German and Italian made cars
,probably . Will they be more or even as reliable? probably not. Can I afford one? defiantly not lol
#12
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
All the Japanese mass volume such as Bridgestone, Fuji, Miyata, Panasonic and Sekine, offered high grade models. So, too did many of the Japnesee contract maanufactured brands, such as Kabuki and C. Itoh, as owners of Diamond series models will testify.
However, a lot of those other so-called Japanese bicycles, such as Centurion, Lotus and Nishiki, were actually owned by USA marketing comanies who had the bicycles contract manufactured by whichever nation offered the best value and consumer accepotance for their price point. In fact all three brands, had high grade models manfactured in Italy during the mid-1980s.
To look at the lowest grade bicycles to come out of Japan, you have to look at the models offered by the USA automotive, hardware and department store chains. Even though they they were manufactured to a very low price point, most of them were still quality bicycles. Sure, they weren't light or high performance but they were inexpensive and could be reliable, if mediocre, recreational transporration. A lot members will roll their eyes about them being "reliable" but the vast majority of these bicycles were decent and good value for their price point. Typically, they weren't much lower grade than the entry level bicycles from the big name, mass volume brands at the LBS. In fact, they were often made by the same company. Their poor reputations stams from the inexperiended, cheap labour they used to assemble these bicycle. All they really needed were competent mechanics, which was the ace up the LBS' sleeve.
However, a lot of those other so-called Japanese bicycles, such as Centurion, Lotus and Nishiki, were actually owned by USA marketing comanies who had the bicycles contract manufactured by whichever nation offered the best value and consumer accepotance for their price point. In fact all three brands, had high grade models manfactured in Italy during the mid-1980s.
To look at the lowest grade bicycles to come out of Japan, you have to look at the models offered by the USA automotive, hardware and department store chains. Even though they they were manufactured to a very low price point, most of them were still quality bicycles. Sure, they weren't light or high performance but they were inexpensive and could be reliable, if mediocre, recreational transporration. A lot members will roll their eyes about them being "reliable" but the vast majority of these bicycles were decent and good value for their price point. Typically, they weren't much lower grade than the entry level bicycles from the big name, mass volume brands at the LBS. In fact, they were often made by the same company. Their poor reputations stams from the inexperiended, cheap labour they used to assemble these bicycle. All they really needed were competent mechanics, which was the ace up the LBS' sleeve.
Last edited by T-Mar; 12-13-21 at 07:03 PM.
Likes For T-Mar:
Likes For droppedandlost:
#14
(rhymes with spook)
Join Date: Aug 2009
Location: Winslow, AR
Posts: 2,788
Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 919 Post(s)
Liked 745 Times
in
546 Posts
Not only that, but the poor quality parts the manufacturers spec'd them with. I've had and have some Schwinns, Dawes, Peugeot, Raleigh, and others that weren't primo as a frameset, but not junk, either. Taking off the junk parts...Simplex, Huret, Shimano, Sunrace, and bottom of the barrel Suntour ...and replacing them with the good stuff makes a world of difference.
Likes For thook:
#15
Full Member
Join Date: May 2013
Location: Tropical Montana
Posts: 401
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 225 Post(s)
Liked 1,101 Times
in
327 Posts
Man, that Robert guy really knows how to start a thread!
In the interest of having a nuanced conversation that starts out with the assumption that we can all appreciate a good or even a low end bike from any country, I'd like to know what you all think are the highest end and lowest end of a country's bikes. Japan, USA, Italy, France and England come to mind as the obvious targets, but perhaps also Switzerland, any of the Nordics. Maybe even Taiwan made bikes in a large enough range in the C&V era to be considered.
.
In the interest of having a nuanced conversation that starts out with the assumption that we can all appreciate a good or even a low end bike from any country, I'd like to know what you all think are the highest end and lowest end of a country's bikes. Japan, USA, Italy, France and England come to mind as the obvious targets, but perhaps also Switzerland, any of the Nordics. Maybe even Taiwan made bikes in a large enough range in the C&V era to be considered.
.
__________________
Montana, where men are men and sheep are lying little tramps.
Montana, where men are men and sheep are lying little tramps.
#16
Strong Walker
Man, that Robert guy really knows how to start a thread!
In the interest of having a nuanced conversation that starts out with the assumption that we can all appreciate a good or even a low end bike from any country, I'd like to know what you all think are the highest end and lowest end of a country's bikes. Japan, USA, Italy, France and England come to mind as the obvious targets, but perhaps also Switzerland, any of the Nordics. Maybe even Taiwan made bikes in a large enough range in the C&V era to be considered.
I'll start.
Japanese High End:
Zunow
C.S. Hirose
Konno/3 Rensho
Cherubim
Japanese Low End:
Royce Union
Kabukis
C. Itoh
Any of the millions of entry level or bike boom bike from mass manufacturers.
In the interest of having a nuanced conversation that starts out with the assumption that we can all appreciate a good or even a low end bike from any country, I'd like to know what you all think are the highest end and lowest end of a country's bikes. Japan, USA, Italy, France and England come to mind as the obvious targets, but perhaps also Switzerland, any of the Nordics. Maybe even Taiwan made bikes in a large enough range in the C&V era to be considered.
I'll start.
Japanese High End:
Zunow
C.S. Hirose
Konno/3 Rensho
Cherubim
Japanese Low End:
Royce Union
Kabukis
C. Itoh
Any of the millions of entry level or bike boom bike from mass manufacturers.
For Japan, you can name almost any manufacturer up on the pedestal, be it Nagasawa, Panasonic, Kalavinka, Umezawa, Anchor, Gan Well, Eimei, Georama, Watanabe.. Etc etc
#17
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,476
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1829 Post(s)
Liked 3,375 Times
in
1,580 Posts
that seems like an obvious thread topic! There would have to be separate competitions for production bikes and custom bikes, though.
I might have to do a search and see if it's already been done.... seems incredible that it wouldn't have been discussed thoroughly by now.
Steve in Peoria
(I think Rivendell would place fairly high in that competition)
I might have to do a search and see if it's already been done.... seems incredible that it wouldn't have been discussed thoroughly by now.
Steve in Peoria
(I think Rivendell would place fairly high in that competition)
Likes For shoota:
#19
Senior Member
Join Date: Jun 2012
Location: Stillwater, OK
Posts: 7,827
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 1872 Post(s)
Liked 692 Times
in
468 Posts
that seems like an obvious thread topic! There would have to be separate competitions for production bikes and custom bikes, though.
I might have to do a search and see if it's already been done.... seems incredible that it wouldn't have been discussed thoroughly by now.
Steve in Peoria
(I think Rivendell would place fairly high in that competition)
I might have to do a search and see if it's already been done.... seems incredible that it wouldn't have been discussed thoroughly by now.
Steve in Peoria
(I think Rivendell would place fairly high in that competition)
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
#20
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,845
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2338 Post(s)
Liked 2,822 Times
in
1,541 Posts
hmmm my first 10 speed was an Azuki.... probably a contract built bike, Paid $160 for it in 1971 (sugar beet hoeing money) it was a good bike for what it was. typical build for the time... suntour deraillers and shifters, dia compe center pull with suicide levers, alloy stem, handle bars, and seat post, quick release wheels with alloy rims.(Sunshine IIRC not sure if 4130 or chrome moly
This was not junk by any means, and compared to todays entry level (big box store) bikes a ton better in functionality and reliability. and had a cool head badge, and nice candy apple blue paint.
this bike got be through highs school and the coast guard....it got to get ridden in Connecticut, NYC, Virginia, florida, Newfoundland, Nova scotia, Bahamas and Bermuda
This was not junk by any means, and compared to todays entry level (big box store) bikes a ton better in functionality and reliability. and had a cool head badge, and nice candy apple blue paint.
this bike got be through highs school and the coast guard....it got to get ridden in Connecticut, NYC, Virginia, florida, Newfoundland, Nova scotia, Bahamas and Bermuda
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
#21
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,845
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2338 Post(s)
Liked 2,822 Times
in
1,541 Posts
under the paint some had not so great brazing, but the lowly torpado super strada i had road so nice that I am looking for it's big brother, the super light
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
#22
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
I can only speak from my own experience, but I'll take a stab at Austrian bikes.
High end: Austro-Daimler Ultima
Double-butted Reynold 531 tubing
Forged Campagnolo dropouts
Reasonable (neutral) geometry
I bought it with a mish-mash of parts and replaced those with a different mish-mash
This was a very smooth bike
Low end: Steyr Clubman
Hi-ten steel frame and fork, with plastic "chrome" fork crown cover
Stamped dropouts
Wacky geometry (69º seat tube angle, IIRC)
I bought it with a lot of rust, including very rusty parts. I cleaned up what I could and supplemented with similarly low end parts where needed.
The saddle was an unholy mix of rubber, steel, and springs.
I rode this thing 100 kilometers and never want to have to ride one again.
When cleaned up, they look kind of nice.
High end: Austro-Daimler Ultima
Double-butted Reynold 531 tubing
Forged Campagnolo dropouts
Reasonable (neutral) geometry
I bought it with a mish-mash of parts and replaced those with a different mish-mash
This was a very smooth bike
Low end: Steyr Clubman
Hi-ten steel frame and fork, with plastic "chrome" fork crown cover
Stamped dropouts
Wacky geometry (69º seat tube angle, IIRC)
I bought it with a lot of rust, including very rusty parts. I cleaned up what I could and supplemented with similarly low end parts where needed.
The saddle was an unholy mix of rubber, steel, and springs.
I rode this thing 100 kilometers and never want to have to ride one again.
When cleaned up, they look kind of nice.
__________________
My Bikes
My Bikes
Likes For Andy_K:
#23
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,845
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2338 Post(s)
Liked 2,822 Times
in
1,541 Posts
Not only that, but the poor quality parts the manufacturers spec'd them with. I've had and have some Schwinns, Dawes, Peugeot, Raleigh, and others that weren't primo as a frameset, but not junk, either. Taking off the junk parts...Simplex, Huret, Shimano, Sunrace, and bottom of the barrel Suntour ...and replacing them with the good stuff makes a world of difference.
IME the low end Japanese bikes I had were a mix of Suntour, Diacompe, SR, Sugino, araya, sunshine, etc and worked well, especially at the price point, I can't speak to simplex or huret.
so different than low end bikes to day where the parts are really throwaway (based on working on neighbors, friends and relatives bikes)
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
#24
Happy With My Bikes
Join Date: Sep 2020
Location: Oklahoma
Posts: 2,186
Bikes: Hi-Ten bike boomers, a Trek Domane and some projects
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 884 Post(s)
Liked 2,307 Times
in
1,117 Posts
There is a lot of talk of what is junk lately. But I suppose Japanese bikes are an easy target to pick on as they were a big part of the 70s and 80s bike booms. But a good many of them were pretty solidly built in my opinion. Suzue hubs, Arraya rims, Sugino cranks, Suntour drivetrains and Dia-Compe brakes hold up well. I'm one of many who owe my love of cycling to the bike boom and Japanese hi-tensile. Were it not for the dependable bikes that came from the bike boom at an affordable price I would not have known anything other than department store chain offerings.
__________________
"It is the unknown around the corner that turns my wheels." -- Heinz Stücke
"It is the unknown around the corner that turns my wheels." -- Heinz Stücke
Likes For Chuck M:
#25
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,847
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,054 Times
in
1,254 Posts
Ot
I feel like I'm on a dystopian Bradbury carousel where the beautiful horses have been replaced with BSOs and the music is Tom Waits 'Bone Machine' playing backwards. And I just keep getting older.
Gonna be a long winter.
Gonna be a long winter.
Likes For clubman: