Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Gearing change for easier climbing

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Gearing change for easier climbing

Old 06-30-21, 07:09 AM
  #1  
teejaywhy
Full Member
Thread Starter
 
teejaywhy's Avatar
 
Join Date: Mar 2019
Location: AZ
Posts: 278
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 141 Post(s)
Liked 116 Times in 69 Posts
Gearing change for easier climbing

My wife has a 2018 women's Tarmac Expert. Ultegra equipped, it has a 52/36 front and 11-30 rear. She is not racing and would like to explore changes to change to some lower gears for easier climbing.

It seems the least expensive would be to swap the cassette, but she has the "short" cage RD which is spec'ed to support a max 30t.

That leaves the front. I know the complete crankset is available in a 50/34 for about $280. But I'm also finding just the smaller chainring in a 34t. Is this possible to just swap the 36t to 34t ?? Would that cause any problems with shifting? Will it really make any difference anyway?

Thanks in advance.
teejaywhy is offline  
Old 06-30-21, 07:42 AM
  #2  
DownByLaw
Member
 
Join Date: May 2009
Posts: 40
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 23 Times in 4 Posts
Cassette and a Wolf Tooth RoadLink might be your best bet: https://www.wolftoothcomponents.com/...ducts/roadlink

I'm not sure the 50/34 front will give your wife the result she wants and seems like a more expensive way to go.

Patrick
DownByLaw is offline  
Old 06-30-21, 07:51 AM
  #3  
Iride01 
I'm good to go!
 
Iride01's Avatar
 
Join Date: Jul 2017
Location: Mississippi
Posts: 14,703

Bikes: Tarmac Disc Comp Di2 - 2020

Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 6063 Post(s)
Liked 4,694 Times in 3,238 Posts
You might find a rear Ultegra mid-cage DR and cassette a less expensive change than a crankset change. Or a 105 mid-cage DR will be even less. Are you certain that DR is a SS version and not a GS version?

As for changing the small chain ring, someone else will have to say. Even if the small 34 will fit a big 52, that's a lot of difference and you'll be out of the min/max diff for the DR, as well as other spec's.
Iride01 is offline  
Old 06-30-21, 07:56 AM
  #4  
HillRider
Senior Member
 
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656

Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!

Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2025 Post(s)
Likes: 0
Liked 1,095 Times in 741 Posts
Changing both the rear derailleur and cassette would be cheaper than changing the crank. The Ultegra GS rear derailleur (or 105 for that matter) will accept a 32T cog and, with a Wolf Tooth, would accept even a larger cog.
HillRider is offline  
Old 06-30-21, 08:02 AM
  #5  
70sSanO
Senior Member
 
70sSanO's Avatar
 
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,750

Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1927 Post(s)
Liked 2,143 Times in 1,309 Posts
The first question is if your wife has ever used the 50-11 combination? If not, dump the 50t.

Both my bike and my wife’s are setup with triples, but I don’t think that is an option with an 11 speed. I would go to a 46-30 subcompact crank. Maybe a GRX RD and run an 11-34 or 36.

I’m not up on the 11 speed stuff but I think GRX will work with Ultegra shifters.

John
70sSanO is offline  
Likes For 70sSanO:
Old 06-30-21, 08:12 AM
  #6  
ThermionicScott 
working on my sandal tan
 
ThermionicScott's Avatar
 
Join Date: Aug 2011
Location: CID
Posts: 22,620

Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)

Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3868 Post(s)
Liked 2,559 Times in 1,574 Posts
Originally Posted by 70sSanO
The first question is if your wife has ever used the 50-11 combination? If not, dump the 50t.

Both my bike and my wife’s are setup with triples, but I don’t think that is an option with an 11 speed. I would go to a 46-30 subcompact crank. Maybe a GRX RD and run an 11-34 or 36.

I’m not up on the 11 speed stuff but I think GRX will work with Ultegra shifters.

John
+1 on the 46/30 crankset. I know there are people who "need" more than 110 gear-inches, but you can still go pretty fast within that limitation.
__________________
Originally Posted by chandltp
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
RUSA #7498
ThermionicScott is offline  
Old 06-30-21, 08:53 AM
  #7  
70sSanO
Senior Member
 
70sSanO's Avatar
 
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,750

Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1927 Post(s)
Liked 2,143 Times in 1,309 Posts
It is too bad there’s no way to set up a 44t, or even 42t, with a 30t on an 11 speed. A 44-11 is equivalent to the old 52-13 4x standard. The typical climbing gear was 42-28, or 39-28 for a little steeper stuff.

My wife’s set up is 46-39-30 with a 12-34, it is not 11 speed. She is not a racer and typically rides in the 39t. Occasionally the 46t and the 30t for climbing. She could probably ride a 42-30 double, if it were available, and not need the 46t or 39t.

Everyone is different, but you have to figure out what gearing is really needed before swapping things out for marginal gains.

John

Last edited by 70sSanO; 06-30-21 at 08:56 AM.
70sSanO is offline  
Old 06-30-21, 09:15 AM
  #8  
cxwrench
Senior Member
 
cxwrench's Avatar
 
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767

Bikes: lots

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times in 1,489 Posts
Again people are recommending the 'road link'. Not a good idea to do this. While they allow the use of a larger (easier) big cog they move the upper pulley away from the smaller cogs and shifting will suffer. They also don't make the pulley cage any longer so the derailleur won't wrap the necessary chain needed for the bigger cogs that are larger than the derailleur is spec'd for.
cxwrench is offline  
Likes For cxwrench:
Old 06-30-21, 10:32 AM
  #9  
Barry2 
LR÷P=HR
 
Join Date: Sep 2019
Location: SF Bay Area
Posts: 2,119

Bikes: 1981 Holdsworth Special, 1993 C-dale MT3000 & 1996 F700CAD3, 2018 Cervelo R3 & 2022 R5, JustGo Runt, Ridley Oval, Kickr Bike 8-)

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 842 Post(s)
Liked 1,148 Times in 664 Posts
Not sure if you are aware, but both FD and RD not only have spec's regarding the number of teeth on a cog/ring.
They also spec the tooth count difference between the largest and smallest, referred to as "Capacity".

The shimano spec for the Capacity of your FD is 16t
50-34=16t
52-36=16t

I don't know if exceeding this 16t will work, so can't recommend it. But the Shimano 34t chainring is only $22 if you wish to (with care) try.

I already have a 50/34 crank so I replaced the SS RD with GS and cassette with an 11-36 cassette.
This setup also exceeds Shimano's spec, but I'm very happy with it.

Barry
Barry2 is offline  
Old 06-30-21, 11:42 AM
  #10  
70sSanO
Senior Member
 
70sSanO's Avatar
 
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,750

Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1927 Post(s)
Liked 2,143 Times in 1,309 Posts
I agree with the above. Keep in mind that capacity only comes into play when running small-small, or close to it in cases of extreme disregard; i.e. running a capacity of 40 with a 30 rated RD might impact the first few cogs in the small chainring.

The max cog, in your case 30t can generally be exceeded. The amount over usually depends on your derailleur hanger. This does bring the Wolftooth RoadLink into play. It lets you exceed the max cog by a lot, but doesn’t impact capacity, which means your wife may have to be disciplined enough not to run the 11, 12, 13, or so when in the 36t chainring.

And as stated above, you can swap out the 36t for a 34t. Try it with the 52t. If it were me, I’d swap out the 52t for a 46t and run the existing 36t to see how she likes it with an 11-36 cassette. Everyone will say it won’t be matched, but for someone who doesn’t race, even pretend against unknown people ahead of them, it will work.

You may still be destined for a crank change with a 30t inner chainring, but maybe this will hold off replacing the crank and only dealing with a cassette change, chain, (if you run a RoadLink), and maybe an outer chainring.

John

Last edited by 70sSanO; 06-30-21 at 11:46 AM.
70sSanO is offline  
Old 06-30-21, 11:47 AM
  #11  
adamrice 
mosquito rancher
 
adamrice's Avatar
 
Join Date: Oct 2009
Location: Austin TX USA
Posts: 931

Bikes: Bob Jackson 853 Arrowhead; Felt VR30; Kinesis UK RTD; Hujsak tandem

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 206 Post(s)
Liked 181 Times in 133 Posts
The step from 52 to 34 is out of spec for your front derailleur. It might work, but I wouldn't be surprised if it's rough. You could also replace the 52 with a 50, which would keep that step in spec. But switching from a 36 to a 34 doesn't give you much of a hill-climbing advantage.

I am also a fan of 46/30 chainrings. You would need new cranks for this (smaller rings need a smaller bolt-circle diameter). She could keep the cassette she has in back, get a 1:1 ratio low gear, and still have pretty close spacing between gears.
__________________
Adam Rice
adamrice is offline  
Old 06-30-21, 12:01 PM
  #12  
rccardr 
aka: Dr. Cannondale
 
rccardr's Avatar
 
Join Date: Jul 2009
Posts: 7,839
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2144 Post(s)
Liked 3,372 Times in 1,193 Posts
You can try a Bikingreen 46/30 110 bcd setup, pretty sure they make them in both 4 and 5 bolt systems, and I think her current crank is 110bcd.
Larger issue may be whether you can get the FD low enough to shift the 46 tooth ring; if the fD is a clamp on type prolly not a problem but if it’s a braze on you may have to also buy a drop down for the FD, which I think Bikingreen also makes.
__________________
Hard at work in the Secret Underground Laboratory...
rccardr is offline  
Likes For rccardr:
Old 06-30-21, 12:22 PM
  #13  
Barry2 
LR÷P=HR
 
Join Date: Sep 2019
Location: SF Bay Area
Posts: 2,119

Bikes: 1981 Holdsworth Special, 1993 C-dale MT3000 & 1996 F700CAD3, 2018 Cervelo R3 & 2022 R5, JustGo Runt, Ridley Oval, Kickr Bike 8-)

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 842 Post(s)
Liked 1,148 Times in 664 Posts
I didn't know these existed !!!!
I like it..... mainly because it would let me keep my Stages dual sided (crank) power meter.

bikinGreen CNC Chainring 46/30T FoR Shimano 4 Arm 10-11Spd Road Cyclocross Tour
I believe this is the adapter

If anyone decides to purchase one, please do report back.

Thanks

Barry

RESEARCH:
This thread comments on "Skinny Bolts" do we know if this is true?

Last edited by Barry2; 06-30-21 at 12:45 PM.
Barry2 is offline  
Likes For Barry2:
Old 07-01-21, 11:12 AM
  #14  
teejaywhy
Full Member
Thread Starter
 
teejaywhy's Avatar
 
Join Date: Mar 2019
Location: AZ
Posts: 278
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 141 Post(s)
Liked 116 Times in 69 Posts
Thanks everyone for the ideas.

I see mention of a mid-cage RD, which brings the question - how many sizes are offered? And how does one tell which size they have?

Research shows only two options: SS and GS. From this I was assuming the Tarmac must have the SS and the Roubaix the GS. ? Or is (was - 2018) there a third size ?

My Roubaix also has the Ultegra RD with 11-32 cassette. The Specialized spec page describes it as "Shimano Ultegra 8000, long cage, 11-speed..." But the specs for the Tarmac say only "Shimano Ultegra 8000, 11-speed..." The cage (which is the bracket with the two guide pulleys, right?) on the Tarmac is visibly shorter than the one on the Roubaix, perhaps a cm smaller.

thanks again...
teejaywhy is offline  
Old 07-01-21, 11:50 AM
  #15  
70sSanO
Senior Member
 
70sSanO's Avatar
 
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,750

Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1927 Post(s)
Liked 2,143 Times in 1,309 Posts
Traditionally a particular model derailleur with short, medium, long cage options only impacted the chain wrap. The max cog was the same because the derailleur body was identical with the cage being the only difference.

While I’m guessing things haven’t changed, but I’m really not sure about more current derailleur offerings since wider range cassettes have become more prevalent on road bikes.

Shimano docs can confirm if a particular model in short or long has the same max cog or if there are other design differences that increase max cog with a longer cage.

That said, I would be more inclined to find a compatible RD that offered both a larger max cog and wrap if contemplating lower cassette gearing.

John
70sSanO is offline  
Old 07-01-21, 08:53 PM
  #16  
Canker
Senior Member
 
Join Date: Aug 2005
Posts: 1,740
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 329 Post(s)
Liked 208 Times in 132 Posts
https://absoluteblack.cc/oval-road-c...-for-110-4bcd/

Absoluteblack also makes chainrings that will let you go sub-compact with your crank but they aren't cheap. I'm running their 46/30 rings on my road/gravel bike so that I could keep my cassette an 11-32 for road riding but have the 30 tooth chainring for climbing super steep gravel climbs. If I were doing it now I'd be tempted just buy a whole GRX crank with 48/31 chainrings and a new GRX front derailleur. That would give me a bit more topend without hurting climbing and around the same cost. Just loose a bit of bike bling.

Going from a 36 chainring to a 34 isn't really going to change much.
Canker is offline  
Old 07-02-21, 05:01 AM
  #17  
Badger6
Obsessed with Eddington
 
Badger6's Avatar
 
Join Date: Jun 2013
Location: Brussels (BE) 🇧🇪
Posts: 1,330

Bikes: '16 Spesh Diverge, '14 Spesh Fatboy, '18 Spesh Epic, '18 Spesh SL6, '21 Spesh SL7, '21 Spesh Diverge...and maybe n+1?

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 532 Post(s)
Liked 621 Times in 368 Posts
Make it easy:

Buy the matched 50/34 chainrings (do NOT mix/match a 34 to a 52, it might work, it won't work well). You do not need a new crank, just new chainrings. I'd avoid the recommendations of a 46/30 setup, that's awfully low, and unnecessary on a road bike.

Buy an 11-32 cassette, run it on the short cage. Yes, it is out of spec, but not by much, and in my experience a couple teeth beyond are fine, Shimano is notoriously conservative with their RD specs. No need for a road link, just set the B-screw to clear the big cog on the cassette, BUT, if you size the chain for big/big, it will be too slack for the small/small combo. Size the chain 1" short, and NEVER run big/big, or size the chain properly, and never run small/small, in fact avoid using the two smallest cogs when on the small ring in the front. The all out option is to buy an 11-34 and get a medium cage RD.

To compare what those setups look like click here.
Badger6 is offline  
Likes For Badger6:
Old 07-02-21, 11:21 AM
  #18  
Barry2 
LR÷P=HR
 
Join Date: Sep 2019
Location: SF Bay Area
Posts: 2,119

Bikes: 1981 Holdsworth Special, 1993 C-dale MT3000 & 1996 F700CAD3, 2018 Cervelo R3 & 2022 R5, JustGo Runt, Ridley Oval, Kickr Bike 8-)

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 842 Post(s)
Liked 1,148 Times in 664 Posts
Originally Posted by Canker
https://absoluteblack.cc/oval-road-c...-for-110-4bcd/ Absoluteblack also makes chainrings that will let you go sub-compact with your crank but they aren't cheap.
Well knowing Absolureblack makes em as well got me all excited, though a lot more expensive that the Bikingreen option.

If you look at the Absoluteblack product you can see the smaller holes for the smaller bolts. But only two of the four holes were of reduced size.
Then it hit me... The Absoluteblack option uses Oval rings, so only two holes are of reduced size. The Bikingreen option has round rings, so I suspect all four hole are reduced for smaller bolts.

Never ridden Oval rings, not sure what to make of those?

Barry
Barry2 is offline  
Old 07-02-21, 11:32 AM
  #19  
Phil_gretz
Zip tie Karen
 
Phil_gretz's Avatar
 
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,006

Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100

Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times in 806 Posts
Originally Posted by teejaywhy
Thanks everyone for the ideas.

I see mention of a mid-cage RD, which brings the question - how many sizes are offered? And how does one tell which size they have?

Research shows only two options: SS and GS. From this I was assuming the Tarmac must have the SS and the Roubaix the GS. ? Or is (was - 2018) there a third size ?

My Roubaix also has the Ultegra RD with 11-32 cassette. The Specialized spec page describes it as "Shimano Ultegra 8000, long cage, 11-speed..." But the specs for the Tarmac say only "Shimano Ultegra 8000, 11-speed..." The cage (which is the bracket with the two guide pulleys, right?) on the Tarmac is visibly shorter than the one on the Roubaix, perhaps a cm smaller.

thanks again...
Don't overlook or dismiss the 46/30T chainring combination for her bike. Several folks have offered this solution, and it's a valid one. Most bikes are geared WAY too high for the average rider, especially if your wife "spins" versus mashes.

(1) 46/30T crankset
(2) Wolf-tooth roadlink to lower the existing rear derailleur
(3) 32T cassette
(4) Shorten chain by 1"
(5) Lower front derailleur accordingly

She'll be set to go. Use this link to visualize the changes that you're contemplating.

Sheldon Brown's Bicycle Gear Calculator
Phil_gretz is offline  
Likes For Phil_gretz:
Old 07-02-21, 12:42 PM
  #20  
Badger6
Obsessed with Eddington
 
Badger6's Avatar
 
Join Date: Jun 2013
Location: Brussels (BE) 🇧🇪
Posts: 1,330

Bikes: '16 Spesh Diverge, '14 Spesh Fatboy, '18 Spesh Epic, '18 Spesh SL6, '21 Spesh SL7, '21 Spesh Diverge...and maybe n+1?

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 532 Post(s)
Liked 621 Times in 368 Posts
Originally Posted by Phil_gretz
Most bikes are geared WAY too high for the average rider...
You have no idea how much I needed that ego boost.
Badger6 is offline  
Old 07-02-21, 07:18 PM
  #21  
70sSanO
Senior Member
 
70sSanO's Avatar
 
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,750

Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1927 Post(s)
Liked 2,143 Times in 1,309 Posts
I think it is reasonable to state that the average cyclist is not spinning out a 50-11 on the flats; maybe with a 25mph tailwind.

But sure enough going down a double digit grade; that does take a good deal of the effort out of the equation.

John

Edit added: The one valid argument was keeping one’s legs moving going downhill in cold weather; which seems like a very good reason.

Last edited by 70sSanO; 07-02-21 at 07:21 PM.
70sSanO is offline  
Likes For 70sSanO:
Old 07-03-21, 07:56 PM
  #22  
Canker
Senior Member
 
Join Date: Aug 2005
Posts: 1,740
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 329 Post(s)
Liked 208 Times in 132 Posts
You don't have to go 46/30, Absoluteblack also makes 48/32 if you want more of a compromise. As for the oval part I'm one of those people that can't tell any difference. I've ran ovals on my mtn bikes in the past and now my road/gravel and have never been able to feel it. The 46 rarely hold me back on a road ride but if my bike was 100% a road bike I'd go 48. I spend way more of my rides climbing at less that 8mph than flying down hills at 30+mph and I've never been climbing a hill and thought "I sure wish this gearing was harder".
Canker is offline  
Likes For Canker:
Old 07-04-21, 05:02 AM
  #23  
SoSmellyAir
Method to My Madness
 
Join Date: Nov 2020
Location: Orange County, California
Posts: 3,529

Bikes: Trek FX 2, Cannondale Synapse, Cannondale CAAD4, Santa Cruz Stigmata GRX

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 1866 Post(s)
Liked 1,406 Times in 975 Posts
Originally Posted by 70sSanO
Traditionally a particular model derailleur with short, medium, long cage options only impacted the chain wrap. The max cog was the same because the derailleur body was identical with the cage being the only difference.

While I’m guessing things haven’t changed, but I’m really not sure about more current derailleur offerings since wider range cassettes have become more prevalent on road bikes.

Shimano docs can confirm if a particular model in short or long has the same max cog or if there are other design differences that increase max cog with a longer cage.

That said, I would be more inclined to find a compatible RD that offered both a larger max cog and wrap if contemplating lower cassette gearing.

John
At least for the current and immediately prior generation Shimano 105 and Ultegra road rear derailleurs, which are available in short cage (SS) and medium cage (GS), the two versions also have slightly different parallelogram geometries (in addition to just cage length), so that the GS version can accommodate the greater difference between the smallest and biggest cogs in the larger range cassettes
SoSmellyAir is offline  
Likes For SoSmellyAir:
Old 07-06-21, 07:40 PM
  #24  
teejaywhy
Full Member
Thread Starter
 
teejaywhy's Avatar
 
Join Date: Mar 2019
Location: AZ
Posts: 278
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 141 Post(s)
Liked 116 Times in 69 Posts
Originally Posted by Badger6
Make it easy:

Buy the matched 50/34 chainrings (do NOT mix/match a 34 to a 52, it might work, it won't work well). You do not need a new crank, just new chainrings. I'd avoid the recommendations of a 46/30 setup, that's awfully low, and unnecessary on a road bike.

Buy an 11-32 cassette, run it on the short cage. Yes, it is out of spec, but not by much, and in my experience a couple teeth beyond are fine, Shimano is notoriously conservative with their RD specs. No need for a road link, just set the B-screw to clear the big cog on the cassette, BUT, if you size the chain for big/big, it will be too slack for the small/small combo. Size the chain 1" short, and NEVER run big/big, or size the chain properly, and never run small/small, in fact avoid using the two smallest cogs when on the small ring in the front. The all out option is to buy an 11-34 and get a medium cage RD.

To compare what those setups look like click here.
Great! Thanks! Didn't realize you can replace the large chainring as well. Looks like that route would be about ~$100 cheaper than the entire crankset.
Perhaps we might try the 11-32 cassette. Worst case, replace the RD if it is not working.

Thanks everyone for the ideas.

Last edited by teejaywhy; 07-07-21 at 09:46 AM.
teejaywhy is offline  
Old 07-18-21, 06:49 PM
  #25  
Barry2 
LR÷P=HR
 
Join Date: Sep 2019
Location: SF Bay Area
Posts: 2,119

Bikes: 1981 Holdsworth Special, 1993 C-dale MT3000 & 1996 F700CAD3, 2018 Cervelo R3 & 2022 R5, JustGo Runt, Ridley Oval, Kickr Bike 8-)

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 842 Post(s)
Liked 1,148 Times in 664 Posts
Bikingreen 46/30 chainrings

Originally Posted by Barry2
bikinGreen CNC Chainring 46/30T FoR Shimano 4 Arm 10-11Spd Road Cyclocross Tour
I believe this is the adapter

If anyone decides to purchase one, please do report back.

Thanks

Barry
OK so I took the plunge and ordered up the Bikingreen 46/30 rings in the 4 bolt version for my R8000 Ultegra cranks along with the Bikingreen Adapter to lower the FD on the hanger.
Rings are nicely made, and unlike the Shimano ones bolts go from outside to inside not that it really matters. I could not find a torque spec for the chainring mounting bolts and used a guesstimate of 9nm. After all the bolts are only going into 7075 aluminum.

Bike is an R3 so it's carbon and the RD hanger is very short in the adjustment department. In fact, it's at the bottom of the adjustment range when using the standard compact 50/34 Shimano rings.
So I need to be able to mount the FD lower and attempted to use the Bikingreen adapter.

The Bikingreen adapter does NOT fit my Di2 FD-R8050 front derailleur. The threaded block at the top of the Bikingreen Adapter hits the housing that contains the Di2 workings. I suspect this would not be an issue for a non Di2 FD, but I don't have one to confirm fit.

GOOGLE to the rescue
FSA makes a similar adapter but without the use of a threaded block at the top....... FSA Bike Bicycle Front Derailleur Super Compact Adapter Kit EL344
I've got one of these on order and will report back once I've tried fitting it.

Picture of Bikingreen Adapter WAY crooked on my Di2 FD
Barry2 is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.