Go Back  Bike Forums > Bike Forums > General Cycling Discussion
Reload this Page >

Clipless Clueless wants to try on the CHEAP

Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

Clipless Clueless wants to try on the CHEAP

Old 06-04-19, 06:55 AM
  #1  
mbusky
Junior Member
Thread Starter
 
Join Date: Jul 2017
Location: Outdoors as much as I can
Posts: 87

Bikes: REI's COOP AVD1.1 touring bike

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 24 Post(s)
Liked 33 Times in 19 Posts
Clipless Clueless wants to try on the CHEAP

I was given a pair of mtb shoes and I have toyed with the idea of clipless but don't want to buy and be disappointed and stuck with pedals I don't want. As a total clipless clueless as myself I have looked to Ebay but don't know enough to to know whats good and whats junk. Is there a better used pedal to seek out for a try or am I nuts? Any and all advice will be thankfully read and accepted.
mbusky is offline  
Old 06-04-19, 07:05 AM
  #2  
ridelikeaturtle
Senior Member
 
ridelikeaturtle's Avatar
 
Join Date: Nov 2015
Location: Dublin, Ireland
Posts: 1,259

Bikes: Bianchi Ti Megatube; Colnago Competition; Planet-X EC-130E; Klein Pulse; Amp Research B4; Litespeed Catalyst; Trek Y11

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 596 Post(s)
Liked 476 Times in 258 Posts
Once you go clipless you probably won't look back. The least expensive Shimano SPDs probably aren't going to cost too much. I'd highly recommend them.
ridelikeaturtle is offline  
Old 06-04-19, 07:07 AM
  #3  
TimothyH
- Soli Deo Gloria -
 
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,782

Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix

Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times in 469 Posts
Shimano M520 pedals can be found for less than $20.
TimothyH is offline  
Likes For TimothyH:
Old 06-04-19, 07:17 AM
  #4  
ridingfool
Full Member
 
Join Date: Jun 2015
Posts: 243
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 86 Post(s)
Liked 19 Times in 17 Posts
Merlin cycles has them new with cleats for 25 dollars only thing is it takes about a week or so to ship
ridingfool is offline  
Old 06-04-19, 07:39 AM
  #5  
bugs11
Senior Member
 
Join Date: Feb 2018
Posts: 55
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 6 Times in 4 Posts
Disregard - didn't see the bit about having MTB shoes.

Try Sierra Trading Post for shoes, unless you have picky feet, then go buy them from a brick and mortar store.
bugs11 is offline  
Old 06-04-19, 08:04 AM
  #6  
fietsbob
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,354 Times in 861 Posts
Power grip straps Power Grips offer a lot of what clipless pedal & shoe combinations offer .
hooking your feet onto the pedals

But cost very little and you can use regular shoes you might need for work, standing all day ..


swinging heel out is an easy release motion ..

Strap Kits ? Power Grips






....
fietsbob is offline  
Old 06-04-19, 08:20 AM
  #7  
DrIsotope
Non omnino gravis
 
DrIsotope's Avatar
 
Join Date: Feb 2015
Location: SoCal, USA!
Posts: 8,553

Bikes: Nekobasu, Pandicorn, Lakitu

Mentioned: 119 Post(s)
Tagged: 0 Thread(s)
Quoted: 4905 Post(s)
Liked 1,731 Times in 958 Posts
The cheapest "try it out" option is gonna be one of the all-in-one packages you can get through places like Amazon, such as the Venzo SPD Shoes + Pedals & Cleats, around $70 all in. There are a number of the shoe + pedal combos on Amazon, none particularly fashionable, but generally well reviewed, and as the OP requested, cheap.

Gone are the glory days of 20 dollar M520s. They're $30+ from Chinese sellers. Shipped from a domestic seller, $45 is pretty typical. Add in even a cheap pair of shoes are you're north of $100.
__________________
DrIsotope is offline  
Old 06-04-19, 08:34 AM
  #8  
Maelochs
Senior Member
 
Maelochs's Avatar
 
Join Date: Oct 2015
Posts: 15,453

Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE

Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7628 Post(s)
Liked 3,453 Times in 1,823 Posts
You can find $25 two-bolt pedals (MTB pedals) all over the place. Wellgo makes some. Another option is to buy Shimano Deore or something, assuming you will like them, and then if you hate them (huge chance you will love them) you can sell them as "Only used three times" for almost what you paid, and toss in the shoes as well.

Don't buy a used pedal---no resale value. If you buy new and like them, you get to keep new pedals. if you dislike them, you can sell them for not too much loss.

I'd get next to a chain-link fence on grass (so you can grab the fence, maybe) and practice clipping and unclipping a lot. The try slow rides around, unclipping and clipping. Also, you can start with the pedals set at the lowest tension, so you can almost yank your foot free from any position.

Even so, a Lot of people have fallen a couple times because they didn't try to unclip until it was too late .... but still find clips and cleats to be well worth it.
Maelochs is offline  
Old 06-04-19, 08:52 AM
  #9  
Rick
Senior Member
 
Join Date: Feb 2007
Posts: 1,379
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 598 Post(s)
Likes: 0
Liked 377 Times in 262 Posts
Whatever you try, practice putting your feet in and out some before you ride. You are used to flat pedals and you automatically remove your feet from the pedals without a thought. You need to train your brain on how your feet go in and out of the clipless pedals so you don't revert to the old automatically and do a pratfall. Read your manual and look at YouTube videos on how you engage and disengage with your model/type of clipless pedal. Shimano has two types of SPD cleats. I believe the SH56 is the easier/beginner cleat and the SH51 is the harder/more advanced cleat. Practice so you can engage and disengage without looking at your pedals and feet. The body follows the head so you need to look at the road in the direction that you want to travel.
Rick is offline  
Old 06-04-19, 09:17 AM
  #10  
rumrunn6
Senior Member
 
rumrunn6's Avatar
 
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,528

Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0

Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5219 Post(s)
Liked 3,564 Times in 2,331 Posts
might get lucky w used stuff on craigslist. plenty of ppl move on from their gear either because they stopped using it or changed type
rumrunn6 is offline  
Old 06-04-19, 09:19 AM
  #11  
88Tempo
Senior Member
 
Join Date: Jun 2018
Posts: 280
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 76 Post(s)
Likes: 0
Liked 19 Times in 15 Posts
If you have a coop nearby that would be the place to check first. They usually have boxes of takeoff pedals.

If not shoot me a PM and I can send you a couple of pairs of Shimano pedals for the cost of shipping. I'll never use them.

I have one pair of Shimano 535 and one pair of Shimano 525.

Last edited by 88Tempo; 06-04-19 at 09:06 PM.
88Tempo is offline  
Likes For 88Tempo:
Old 06-04-19, 09:26 AM
  #12  
bakerjw
Senior Member
 
Join Date: Sep 2008
Location: NE Tennessee
Posts: 917

Bikes: Giant TCR/Surly Karate Monkey/Foundry FireTower/Curtlo Tandem

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 169 Post(s)
Liked 84 Times in 62 Posts
There are a lot of different ones out there too. Myself, I like crank brothers egg beaters as you can clip in by pulling back or pushing forward.
bakerjw is offline  
Old 06-04-19, 09:38 AM
  #13  
DomaneS5
Fredly Fredster
 
DomaneS5's Avatar
 
Join Date: Jan 2017
Posts: 639

Bikes: Trek Domane S5, Trek 1.1c, Motobecane Omni Strada Comp, Trek X-Caliber 6

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 207 Post(s)
Liked 18 Times in 14 Posts
Speedplay Frogs are double-sided and very easy to clip in and out of. But they cost $100.... much more than the lower end SPDs.
DomaneS5 is offline  
Old 06-04-19, 09:46 AM
  #14  
1nterceptor
LET'S ROLL
 
1nterceptor's Avatar
 
Join Date: Nov 2009
Location: NEW YORK, NY - USA
Posts: 4,782

Bikes: 2014 BMC Gran Fondo, 2013 Brompton S6L-X

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 306 Post(s)
Liked 44 Times in 33 Posts
Lots of folks statrted their clpipless jouney w/ Shimano M520.
Myself included. It's a good set; last long, good price:
1nterceptor is offline  
Old 06-04-19, 09:55 AM
  #15  
TimothyH
- Soli Deo Gloria -
 
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,782

Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix

Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times in 469 Posts
Originally Posted by 88Tempo
If you have a coop nearby that would be the place to check first. They usually have boxes of takeoff pedals.

If not shoot me a PM and I can send you a couple of pairs of Shimano pedals for the cost of shipping. I'll never use them.

I have one pair of Shimano A-535 and one pair of Shimano A-525.

You are a good person.

The world needs more of this.


-Tim-
TimothyH is offline  
Old 06-04-19, 10:34 AM
  #16  
Slightspeed
Senior Member
 
Slightspeed's Avatar
 
Join Date: Apr 2017
Location: Los Angeles, CA
Posts: 2,257

Bikes: 1964 Legnano Roma Olympiade, 1973 Raleigh Super Course, 1978 Raleigh Super Course, 1978 Peugeot PR10, 2002 Specialized Allez, 2007 Specialized Roubaix, 2013 Culprit Croz Blade

Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 741 Post(s)
Liked 817 Times in 420 Posts
I've been a fan of Shimano SPD pedals even on my road bikes. I bought a cheap set of Nashbar branded SPDs for $20, years ago, and was very unhappy with them, hard to get into and out of, despite adjustments. I've stuck with Shimano, bought both new and used with no issues. Last weekend, I picked up a used, but nearly new looking pair of Giant SPDs for $20 at a local bike swap meet. These are great pedals, positive firm lock going in, easy out. If you want cheap, look for used, either bike co-op, swap meet or CL. Also lots of places have online sales, watch for that. New pedals usually come with cleats, but used ones don't always. Stick with name brands, mostly Shimano, but I love these Giants, never saw them before.


I also bought the red cloth tape at the same swap meet, but here's the Giants.
Slightspeed is offline  
Old 06-04-19, 08:48 PM
  #17  
hillyman
WALSTIB
 
hillyman's Avatar
 
Join Date: Mar 2002
Posts: 1,798
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 280 Post(s)
Liked 384 Times in 183 Posts
I highly recommend the Shimano pedals and cleats that use the SM-SH56. Great for beginners because you can unclip multiple directions. Also for folks like me that have used SPDs for years. Great for touring or for bikes used on multi surfaces.
__________________
www.bikeleague.org

hillyman is offline  
Old 06-04-19, 10:32 PM
  #18  
Teamprovicycle
Banned
 
Join Date: Mar 2018
Location: Providence
Posts: 733

Bikes: Specialized tarmac sl2 giant tcx zero

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 319 Post(s)
Likes: 0
Liked 3 Times in 3 Posts
just dive in , leap first look second , i personal started with road , never had one problem , watch out for slippery surfaces like sand , and always pull foot to the side ,

NOT UP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Teamprovicycle is offline  
Old 06-04-19, 10:34 PM
  #19  
Camilo
Senior Member
 
Join Date: Apr 2007
Posts: 6,760
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1107 Post(s)
Liked 1,197 Times in 758 Posts
As others have said, you can't go wrong with Shimano pedals, even the cheapest ones will probably outlive 99% of average riders. I have several, including used, and haave never had a problem with the used ones.

I also have a couple pair of very inexpensive Wellgo pedals. I've gotten years of problem free use out of them as well. A lot (all?) of the house brand pedals are made by Wellgo. So don't be afraid to buy a set of non-Shimano if the price is right. If you do, I suggest that you see the wording "SPD compatible" in the product description as opposed to "SPD type" or such. The Wellgo pedals I have are "SPD compatible" and the Shimano or Wellgo cleats can be used for all the pedals I have, Wellgo or Shimano. If the pedals are "SPD type" that just means the cleat and pedal look sort of like actual SPD pedals, but might not be fully compatible.

The other pedals mentioned Crank Bros, Speedplay Frogs, etc. are great "two hole cleat" pedals, but often more expensive than the least expensive Shimano or Wellgo options. In the case of Frogs, they are expensive with no cheap options. Crank Bros has some pretty cheap options.

Frankly, all the pedals will work great, just pick something in your price point and give them a try. Don't worry about brand.
Camilo is offline  
Old 06-04-19, 10:53 PM
  #20  
79pmooney
Senior Member
 
79pmooney's Avatar
 
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,830

Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder

Mentioned: 128 Post(s)
Tagged: 0 Thread(s)
Quoted: 4745 Post(s)
Liked 3,861 Times in 2,510 Posts
Cheap is OK, but be sure the cleats match the pedals. There are pedals that look like Shimano SPDs but are not. Likewise, the cleats. Mis-matches can make for either unclips when you weren't planning it or not being able to unclip when you want to. (Wellgo/Nashbar/Forte cleats and pedals are fully interchangeable with the Shimano cleats and pedals indicated on the packaging so they are fine and usually noticeably cheaper. Wellgo makes good stuff. Not great, not fancy, but solidly good.)

I crashed hard on my first pair of pseudo-SPDs and cleats that looked "right" 20 years ago. Been using Wellgo/Forte LOOK-style pedals with either their cleats or LOOK cleats since with zero issues. (LOOK is probably not the pedal you want. Not MTB shoe compatible and lousy to walk on. Their Delta pedals were one of the very first clipless. Keo is their current standard.)

Ben
79pmooney is offline  
Old 06-05-19, 04:10 AM
  #21  
mbusky
Junior Member
Thread Starter
 
Join Date: Jul 2017
Location: Outdoors as much as I can
Posts: 87

Bikes: REI's COOP AVD1.1 touring bike

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 24 Post(s)
Liked 33 Times in 19 Posts
Thank you all

I have taken all advice to heart and am accepting 88Tempo's generous offer. With this I wet my feet and maybe even become a clipless convert. Thank you all for the information and opinions. Sunny days to you all.
mbusky is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Badbird2000
Road Cycling
22
09-24-19 11:20 AM
Smokey69
Road Cycling
28
07-11-18 12:32 AM
illusiumd
Clydesdales/Athenas (200+ lb / 91+ kg)
21
05-08-15 10:10 PM
Hayden06F4i
General Cycling Discussion
14
04-20-10 06:12 PM
stickmangumby
Commuting
29
02-21-10 08:24 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.