Sram red caliper brake pad washers
04-05-21, 07:43 PM
#1
Senior Member
Thread Starter
Join Date: Oct 2007
Location: st augustine fl
Posts: 1,003
Bikes: 2017 BMC Roadmachine 01 Enve wheels, Sram red etap,Cinelli Vigorelli single speed, 2009 Cannondale Capo, 2016 trek Domane 6.9, disc and Di2, 2016 Scott Scale 710, 27.5 plus tires and boost rims
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 110 Post(s)
Liked 203 Times
in
81 Posts
Sram red caliper brake pad washers
I just bought 2 sets of used Sram Red caliper brakes from two different sellers. Both sets came with the pads on but all four pads have the washers stacked differently or flipped over.
I am sure there is one correct way, anyone know what that is?
I am sure there is one correct way, anyone know what that is?
__________________
"ready to navigate"
"ready to navigate"
04-06-21, 09:11 AM
#2
Senior Member
Join Date: Apr 2012
Location: Nor Cal
Posts: 6,016
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1814 Post(s)
Likes: 0
Liked 923 Times
in
569 Posts
The flat sides of the washers face the brake arm, and the dished sides face the corresponding dished surfaces of the screw and the brake pad holder,
allowing the the pad to pivot for adjustment.
Likes For woodcraft:
04-06-21, 07:59 PM
#3
Senior Member
Thread Starter
Join Date: Oct 2007
Location: st augustine fl
Posts: 1,003
Bikes: 2017 BMC Roadmachine 01 Enve wheels, Sram red etap,Cinelli Vigorelli single speed, 2009 Cannondale Capo, 2016 trek Domane 6.9, disc and Di2, 2016 Scott Scale 710, 27.5 plus tires and boost rims
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 110 Post(s)
Liked 203 Times
in
81 Posts
Thanks Woodcraft!
All set now, one of the sets had four flat washers in the mix and had me a bit confused, got it all dialed in now.
All set now, one of the sets had four flat washers in the mix and had me a bit confused, got it all dialed in now.
__________________
"ready to navigate"
"ready to navigate"
