My 650A (650B) Rando-Commuter Build and Updates Thread.
#1
working on my sandal tan
Thread Starter
Join Date: Aug 2011
Location: CID
Posts: 22,626
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 2,563 Times
in
1,577 Posts
My 650A (650B) Rando-Commuter Build and Updates Thread.
*** 2021 NOTE: This build has been through a few iterations! If you want to skip a bunch of hemming and hawing and gory mistakes, click here for the current state: https://www.bikeforums.net/classic-v...l#post22178135 ***
Original story starts below, in 2013:
----------------------------------------------------
Hey folks, it's no secret that I've been accumulating parts for a project this winter, but I haven't posted much about the build for fear that something wouldn't fit and have to abort the project in shame. Well, the wheels are finally done, and things are looking up (if grainy)!
Frame, rims, and rear hub are courtesy of balindamood, front hub is courtesy of 3speedslow.
The fender clearance looks good in front and rear:
My only concern is at the chainstays. Nothing rubs, but I'll most likely end up moving the wheels back in the dropouts to free up some room:
These are the Panaracer Col de Vie 650A tires -- I'm not crazy about the tread, but with Panaracer's nice sidewalls, they should ride comfortably without robbing too much energy from the rider. More to come!
Original story starts below, in 2013:
----------------------------------------------------
Hey folks, it's no secret that I've been accumulating parts for a project this winter, but I haven't posted much about the build for fear that something wouldn't fit and have to abort the project in shame. Well, the wheels are finally done, and things are looking up (if grainy)!
Frame, rims, and rear hub are courtesy of balindamood, front hub is courtesy of 3speedslow.
The fender clearance looks good in front and rear:
My only concern is at the chainstays. Nothing rubs, but I'll most likely end up moving the wheels back in the dropouts to free up some room:
These are the Panaracer Col de Vie 650A tires -- I'm not crazy about the tread, but with Panaracer's nice sidewalls, they should ride comfortably without robbing too much energy from the rider. More to come!
__________________
RUSA #7498
Originally Posted by noglider
People in this forum are not typical.
Last edited by ThermionicScott; 09-14-21 at 10:06 AM. Reason: notes for posterity
Likes For ThermionicScott:
#2
Señor Member
Join Date: Jul 2009
Location: Boston Burbs
Posts: 1,637
Bikes: Bedford, IF, Hampsten, DeSalvo, Intense Carbine 27.5, Raleigh Sports, Bianchi C.u.S.S, Soma DC Disc, Bill Boston Tandem
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Looks like you could dimple the chainstays to gain some clearance.
What's the difference between 650a and 650b? I could search, but I am lazy...
What's the difference between 650a and 650b? I could search, but I am lazy...
#4
Senior Member
Join Date: Dec 2005
Posts: 17,143
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3803 Post(s)
Liked 6,631 Times
in
2,599 Posts
650a = 590mm
650b = 584mm
Col de la vies come in both sizes, but those look like 650a.
650b = 584mm
Col de la vies come in both sizes, but those look like 650a.
Likes For nlerner:
#6
working on my sandal tan
Thread Starter
Join Date: Aug 2011
Location: CID
Posts: 22,626
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 2,563 Times
in
1,577 Posts
Yep, they're 650A/ISO 590/EA3/26x1-3/8", whatever you prefer to call them. Exactly in between 700C and 26" MTB. I've been wanting to try good tires in this size for a while.
#7
Senior Member
Join Date: Jul 2008
Location: Nampa Idaho
Posts: 1,081
Bikes: 76' Centrurion Pro-Tour, 86' Specialized Rock Hopper, 88' Centurion Iron Man, 89' Bruce Gordon "Hikari", 95' Rock Hopper Ultra.
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 14 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Dang! I've been waiting to see this, and the pics aren't working for me...;-( Can't wait to see it!
Cheers,
Chris
Cheers,
Chris
#8
Wrench Savant
I am anxious to see it finished as well. That frame was last built with 650B's, so I figured the 650A's would be great. I wound up with two sets of NOS 650A rims (nice ones) and they have both gone to C&V members.
#9
working on my sandal tan
Thread Starter
Join Date: Aug 2011
Location: CID
Posts: 22,626
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 2,563 Times
in
1,577 Posts
Not much to report lately. I decided to get the Frame Saver in there before adding too many more parts. Once this all dries, assembly should be brisk:
I asked my girlfriend if it smelled sort of like bleu cheese to her, too. "Maybe robot bleu cheese."
I asked my girlfriend if it smelled sort of like bleu cheese to her, too. "Maybe robot bleu cheese."
__________________
RUSA #7498
Originally Posted by noglider
People in this forum are not typical.
Last edited by ThermionicScott; 08-16-17 at 12:28 PM. Reason: imguring
#10
Senior Member
THANKS! I'll continue following this because I am thinking of building my son an SS get-to-school commuter with 26 inch wheels on a 51 c-c Tri frame (Ishiwata EX). I'll be looking at what you do for brakes and ... fenders? Like yours, my son's frame has no braze-ons.
__________________
Vitus 979, Simplon 4 Star, Gazelle Champion Mondial, Woodrup Giro, Dawes Atlantis
Vitus 979, Simplon 4 Star, Gazelle Champion Mondial, Woodrup Giro, Dawes Atlantis
#11
Senior Member
650A was a common size for Japanese-made randonneur bikes, moreso than 650B.
__________________
Check out www.djcatnap.com for articles on vintage Japanese & French bicycle restorations, components and history.
Check out www.djcatnap.com for articles on vintage Japanese & French bicycle restorations, components and history.
#12
Senior Member
Looking forward to seeing the finished product.
650A is still a common size for sport bikes in Japan. I have a friend with a custom made Alps built around 650A. They have access to much better tires there as a result.
650A is still a common size for sport bikes in Japan. I have a friend with a custom made Alps built around 650A. They have access to much better tires there as a result.
__________________
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
#13
working on my sandal tan
Thread Starter
Join Date: Aug 2011
Location: CID
Posts: 22,626
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 2,563 Times
in
1,577 Posts
Thanks for the support, guys. Now that the Frame Saver has dried, I'm excited to hang more parts on this thing. Lenton58's comment was a reminder that I need to invest in a better camera -- my frame *does* have fender eyelets in front and rear, so that won't be a problem. Now I'm just trying to decide which fenders to get!
#14
Senior Member
This build looks sweet and I keep checking back on the thread.
#15
Senior Member
I vote aluminum and NOT hammered.
__________________
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
#16
working on my sandal tan
Thread Starter
Join Date: Aug 2011
Location: CID
Posts: 22,626
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 2,563 Times
in
1,577 Posts
Smooth aluminum certainly looks less pretentious. I have about 48mm between the fork blades and less between the chainstays, so I'm either looking at hammered 45mm fenders that I don't have to manipulate, or 52mm smooth fenders that I'll have to. If only I could find ~45mm smooth fenders for 650A/650B wheels, I'd be set...
#17
Senior Member
They're easy to manipulate for a custom fit. You can handle it, I assure you. 45mm fenders would not look as good as 48 or 52mm. The VO Zeppelins have a classy profile, but smooth fenders would look as good or better on your frame, I think.
__________________
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
#18
Senior Member
#19
Senior Member
I took another look and I can see the braze ons. I don't know how I missed them on the rear D.O.'s.
__________________
Vitus 979, Simplon 4 Star, Gazelle Champion Mondial, Woodrup Giro, Dawes Atlantis
Vitus 979, Simplon 4 Star, Gazelle Champion Mondial, Woodrup Giro, Dawes Atlantis
#20
working on my sandal tan
Thread Starter
Join Date: Aug 2011
Location: CID
Posts: 22,626
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 2,563 Times
in
1,577 Posts
I agree on the smooth vs segmented vs hammered fenders. Problem is that the $60 for the VO stuff was already pushing what I wanted to spend for fenders.
Anyways, it's starting to look more like a bike now!
The Weinmann levers I bought to go along with the centerpulls had too small of a clamp to fit on the GB (England) rando bars, so for now, I'm going with the spare RX100 levers I had lying around. I'm a little concerned they won't pull enough cable, but if they do work out, they'll be more comfortable than non-aero levers.
At this point, the aesthetes are likely pulling out their hair at all of the mismatching gray parts. I didn't realize at first how badly the beige-ish 1056 parts would clash with the purer silver of the 1050 crankset and Sugino big ring. Time will tell if it bugs me enough to change.
A note on my gearing scheme: the crankset is 48/39 with a 13-28T cassette, for an overall range of 37 to 97 gear-inches. I compromised on the top end because I don't need particularly tall gears for the riding I do, and this will allow me to spend the vast majority of my time in the big ring and the middle of the cassette.
Anyways, it's starting to look more like a bike now!
The Weinmann levers I bought to go along with the centerpulls had too small of a clamp to fit on the GB (England) rando bars, so for now, I'm going with the spare RX100 levers I had lying around. I'm a little concerned they won't pull enough cable, but if they do work out, they'll be more comfortable than non-aero levers.
At this point, the aesthetes are likely pulling out their hair at all of the mismatching gray parts. I didn't realize at first how badly the beige-ish 1056 parts would clash with the purer silver of the 1050 crankset and Sugino big ring. Time will tell if it bugs me enough to change.
A note on my gearing scheme: the crankset is 48/39 with a 13-28T cassette, for an overall range of 37 to 97 gear-inches. I compromised on the top end because I don't need particularly tall gears for the riding I do, and this will allow me to spend the vast majority of my time in the big ring and the middle of the cassette.
__________________
RUSA #7498
Originally Posted by noglider
People in this forum are not typical.
Last edited by ThermionicScott; 08-16-17 at 12:31 PM. Reason: imguring
#21
Senior Member
Looking good! I think you will like the feel more if you move the brake levers 1cm along the bar toward the stem and tilt the bar back just a smidge more. Despite the red graphics I think black cages would look better. Those levers will work very well with the centerpulls so no worries there. I use 105 levers of the same era with 610s and it's smooth sailing.
__________________
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
#22
working on my sandal tan
Thread Starter
Join Date: Aug 2011
Location: CID
Posts: 22,626
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 2,563 Times
in
1,577 Posts
Thanks Justin! I think the red cages will make more sense once the red cable housings and bar tape go on -- I don't like too much "dark" stuff on a bike.
I like a lot of the things Brian did when he built up this frame before me:
(Although I now see he used black cages. Heh.)
I like a lot of the things Brian did when he built up this frame before me:
(Although I now see he used black cages. Heh.)
__________________
RUSA #7498
Originally Posted by noglider
People in this forum are not typical.
Last edited by ThermionicScott; 08-16-17 at 12:33 PM. Reason: imguring
#23
Senior Member
That head-on shot of those rando bars makes for an interesting comparison with the Nitto version of the same type of bar. Personally, I do not see any "clash" in the hues of alloy parts. It's sorda-kinda 'machine-like', which I think is apropos.
__________________
Vitus 979, Simplon 4 Star, Gazelle Champion Mondial, Woodrup Giro, Dawes Atlantis
Vitus 979, Simplon 4 Star, Gazelle Champion Mondial, Woodrup Giro, Dawes Atlantis
#24
Senior Member
Nice !
I had completely forgotten about that front hub, great to see were it finally went with. I like the project and the direction it is going. Will this be for long distance travel or mostly close to home trips ?
I would love to try some GB Rando bars, got close to getting some but slipped out of my hands. Looking forwards to more posts to this thread.
3SS
I had completely forgotten about that front hub, great to see were it finally went with. I like the project and the direction it is going. Will this be for long distance travel or mostly close to home trips ?
I would love to try some GB Rando bars, got close to getting some but slipped out of my hands. Looking forwards to more posts to this thread.
3SS
#25
working on my sandal tan
Thread Starter
Join Date: Aug 2011
Location: CID
Posts: 22,626
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 2,563 Times
in
1,577 Posts
Hey 3SS, my plan is that this bike would be a do-nearly-everything machine: brevets, touring, commuting, club rides, gravel/trail rides, you name it. The only things it won't do are fixed-gear/winter riding (I have a bike for that) and winning races (no interest in that anyway. )
I didn't get any good pictures last night, but I got the front brake hooked up and the braking action is surprisingly good! I also used my bench grinder to subtly reshape the outer edge of the front derailleur cage. This allows it to hug the 48T big ring closer -- it was originally designed for a 52/53T.
I didn't get any good pictures last night, but I got the front brake hooked up and the braking action is surprisingly good! I also used my bench grinder to subtly reshape the outer edge of the front derailleur cage. This allows it to hug the 48T big ring closer -- it was originally designed for a 52/53T.