Flat top aero bars?
#1
Full Member
Thread Starter
Flat top aero bars?
I’m looking to upgrade my bars, really just want to make a change more than anything. I’m looking at the Easton ec90 or Specialized Aerofly bars. I normally ride a decent about of time holding onto the top of the bars and I think the flat part would make it a little more comfortable. But, I’m open to opinions and recommendations.
#2
Full Member
I have the Easton EC70s on my bikes yes the flat tops are much more comfortable than round bars if you use the tops a lot.
West
West
#3
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,635
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4733 Post(s)
Liked 1,531 Times
in
1,002 Posts
What bars do you have now (round tubed alloy)? There's flat top like you asked about, otherwise there's also just flatter (than round) ovalized as well, if the idea is comfort. The ovalized type lend themselves generally to being easier taped further toward the center clamp area than the flattened aero type. Examples of these eg. a FSA KForce compact or Enve compact, etc.
#5
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20810 Post(s)
Liked 9,456 Times
in
4,672 Posts
I recently built a new bike with EC70s. Since it's the middle of winter, I haven't had it on the road yet, but the tops do seem comfy on the trainer and they look boss.
The main drawback? Holy **** was it a bear to route the hydro hoses and mechanical cable housing through them. After bashing my head on the learning curve, it'd certainly be easier the second time around, but it would still be a pain in the ass and I'd set aside the better part of a day to do it. If you have Di2 and/or rim brakes, it'll probably be easier, but approach it patiently, either way.
The main drawback? Holy **** was it a bear to route the hydro hoses and mechanical cable housing through them. After bashing my head on the learning curve, it'd certainly be easier the second time around, but it would still be a pain in the ass and I'd set aside the better part of a day to do it. If you have Di2 and/or rim brakes, it'll probably be easier, but approach it patiently, either way.
Likes For WhyFi:
#6
Full Member
Thread Starter
What bars do you have now (round tubed alloy)? There's flat top like you asked about, otherwise there's also just flatter (than round) ovalized as well, if the idea is comfort. The ovalized type lend themselves generally to being easier taped further toward the center clamp area than the flattened aero type. Examples of these eg. a FSA KForce compact or Enve compact, etc.
yes, I have round alloy. I’m just looking to upgrade the bike a little in comfort and look.
#7
Senior Member
Join Date: Apr 2012
Location: Nor Cal
Posts: 6,016
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1814 Post(s)
Likes: 0
Liked 923 Times
in
569 Posts
I have flat topped bars, which I like,
but the whole comfort idea seems odd- pretty much the only time that I'm on the tops is while climbing,
with very little weight on the hands, and the bar tops are not taped, reducing any increased comfort from the flatness.
They look cool, may be a tiny bit more aero, flex more, increasing overall comfort, and concealed cable housings are nice, at least once installed.
The carbon molding that allows the flat top also allows other subtle shapes that make the bars better relative to alloy ones that are a bent tube.
Make sure there is some round area to mount light & head unit if you use those.
Aero bars signal an interest in speed, which suggests an aero riding position and so little time on the bar tops.
Anyway, I was happy to spend $$ for bars, so I say go for it.
but the whole comfort idea seems odd- pretty much the only time that I'm on the tops is while climbing,
with very little weight on the hands, and the bar tops are not taped, reducing any increased comfort from the flatness.
They look cool, may be a tiny bit more aero, flex more, increasing overall comfort, and concealed cable housings are nice, at least once installed.
The carbon molding that allows the flat top also allows other subtle shapes that make the bars better relative to alloy ones that are a bent tube.
Make sure there is some round area to mount light & head unit if you use those.
Aero bars signal an interest in speed, which suggests an aero riding position and so little time on the bar tops.
Anyway, I was happy to spend $$ for bars, so I say go for it.
#8
just having fun
Local race teams change their cervelo bars and sell the old ones, so I've been able to score the Cervelo aero bars for $150 when they are $400 new. I love them and won't ride rounds again if i have a choice
#9
Senior Member
Join Date: Jul 2009
Posts: 5,945
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3948 Post(s)
Liked 7,291 Times
in
2,945 Posts
#10
Senior Member
Join Date: Mar 2010
Location: Seattle, WA
Posts: 23,208
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 18883 Post(s)
Liked 10,646 Times
in
6,054 Posts
I find them a little less comfortable than a more traditional (round) bar, but I'm rarely in the tops anyway so it doesn't matter. They look cool.
#11
Senior Member
#13
Senior Member
Join Date: Jul 2009
Posts: 5,945
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3948 Post(s)
Liked 7,291 Times
in
2,945 Posts
#14
Full Member
Thread Starter
My LBS has a set of Giant contact slr bars for 1/2 price, so I grabbed those. I’m going to have them installed tomorrow with new bar tape. Thank you for the help!!!
#15
Senior Member
Join Date: Jul 2018
Location: USA
Posts: 2,190
Bikes: Ti, Mn Cr Ni Mo Nb, Al, C
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 942 Post(s)
Liked 526 Times
in
349 Posts
My new Ritchey WCS Streem III alloy bars arrived today.I got them for the same reason, mainly by reducing the drop and reach from bars I have been running.But I think the flattened tops, which aren’t super aero but more ovalized may also be more comfy when I ride on the tops.
#17
Senior Member
Join Date: Jul 2009
Posts: 5,945
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3948 Post(s)
Liked 7,291 Times
in
2,945 Posts
The heel of your hand is where the meat (i.e padding) is. If the heels of your hands are not resting on the bars, there is more need for increased bar comfort.
#18
Senior Member
#20
Senior Member
Join Date: Jul 2009
Posts: 5,945
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3948 Post(s)
Liked 7,291 Times
in
2,945 Posts
#22
Senior Member
Join Date: Jul 2009
Posts: 5,945
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3948 Post(s)
Liked 7,291 Times
in
2,945 Posts
#23
Senior Member
Join Date: Oct 2018
Location: NH
Posts: 56
Bikes: '01 Klein Quantum, '91 GT Zaskar, '70s Di Lorenzo, '74 Gitane Champion du Monde, '50s Steyr Klunker, Cannondale Singlespeed
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 18 Post(s)
Likes: 0
Liked 21 Times
in
14 Posts
I always thought this would be the case. I only ride on the flats when I'm taking it easy, but it never seemed like aero-flat portion would be comfortable, and it seemed like this area wasn't intended for actually seeing hands - especially since most people don't tape them
#24
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,635
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4733 Post(s)
Liked 1,531 Times
in
1,002 Posts
https://www.giant-bicycles.com/us/gi...aero-handlebar
#25
Full Member
Thread Starter
Not that version, I believe that is the proprietary propel bars that require the specific stem. I bought these.
https://www.giant-bicycles.com/us/co...road-handlebar
https://www.giant-bicycles.com/us/co...road-handlebar
I assume the aero version, ie. the one pictured below? Interesting but there aren't any other angle views on Giant's site to show the side profile. And it looks like it needs a dedicated stem design, correct?
https://www.giant-bicycles.com/us/gi...aero-handlebar
https://www.giant-bicycles.com/us/gi...aero-handlebar