Headset
#1
Junior Member
Thread Starter
Headset
I have a Bianchi Coast to Coast Via Nirone from 2007. I need to replace the headset. The headset is a FSA ZS4-Custom. I couldn't find it anywhere on the FSA website. Are there other headsets similar to the FSA ZS4-Custom either from FSA or a different brand that would work with my bike? Thanks!
#2
Senior Member
Join Date: May 2003
Location: Mountain Brook. AL
Posts: 4,002
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 303 Post(s)
Likes: 0
Liked 136 Times
in
104 Posts
? https://www.modernbike.com/product-2126265426?TID=394 ?
There is also this bit from FSA that might help, if you take your headset out and measure it per the video:
https://www.fsaeasyheadset.com
Measuring tool needed: https://www.harborfreight.com/hand-t...per-63711.html
There is also this bit from FSA that might help, if you take your headset out and measure it per the video:
https://www.fsaeasyheadset.com
Measuring tool needed: https://www.harborfreight.com/hand-t...per-63711.html
Last edited by sch; 07-21-21 at 03:35 PM.
#3
Junior Member
Thread Starter
? https://www.modernbike.com/product-2126265426?TID=394 ?
There is also this bit from FSA that might help, if you take your headset out and measure it per the video:
https://www.fsaeasyheadset.com
Measuring tool needed: https://www.harborfreight.com/hand-t...per-63711.html
There is also this bit from FSA that might help, if you take your headset out and measure it per the video:
https://www.fsaeasyheadset.com
Measuring tool needed: https://www.harborfreight.com/hand-t...per-63711.html
#4
Senior Member
Join Date: May 2003
Location: Mountain Brook. AL
Posts: 4,002
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 303 Post(s)
Likes: 0
Liked 136 Times
in
104 Posts
I don't necessarily think that is the replacement but it comes up when you google the original # and I thought
you could eyeball it and its specs and see if it resembled yours. Also the FSA video demonstrates how
to do basic measurements as a an approach to IDing possible replacements which certainly exist, but absent
any ID/OD diameters your guess is as good as anyone's on the web.
you could eyeball it and its specs and see if it resembled yours. Also the FSA video demonstrates how
to do basic measurements as a an approach to IDing possible replacements which certainly exist, but absent
any ID/OD diameters your guess is as good as anyone's on the web.