View Poll Results: ...
a
1
100.00%
b
1
100.00%
Multiple Choice Poll. Voters: 1. You may not vote on this poll
eBay / CraigsList finds - "Are you looking for one of these!?" Part II
03-13-21, 10:10 PM
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,917
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1799 Post(s)
Liked 2,334 Times
in
1,378 Posts
Ok, tonight I drank some bourbon and yet, I recognize this as a deal.
So far it was $300, then $200, then $150 and now $100. It's listed under Mountain bikes so might explain how it just dropped $100 and not been bought. Plus, Palmyra ME is way and gone out there but only 30 miles to Bangor.
Zebra Road Touring Bicycle
$100
Specialized Stumpjumper Mountain Bikes
Listed 3 weeks ago in Palmyra, ME
Message
So far it was $300, then $200, then $150 and now $100. It's listed under Mountain bikes so might explain how it just dropped $100 and not been bought. Plus, Palmyra ME is way and gone out there but only 30 miles to Bangor.
Zebra Road Touring Bicycle
$100
Specialized Stumpjumper Mountain Bikes
Listed 3 weeks ago in Palmyra, ME
Message
Details
- Condition
Used - Good - Brand
Zebra Ultima
03-14-21, 08:08 AM
Full Member
Join Date: Aug 2020
Posts: 237
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 107 Post(s)
Liked 151 Times
in
96 Posts
03-14-21, 10:28 AM
Port
Join Date: Jan 2008
Location: Boston
Posts: 6,648
Bikes: 2022 Soma Fog Cutter, 2021 Calfee Draqonfly 44, 1984 Peter Mooney, 2017 Soma Stanyan, 1990 Fuji Ace, 1990 Bridgestone RB-1, 1995 Independent Fabrications Track, 2003 Calfee Dragonfly Pro
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,852 Times
in
1,055 Posts
https://boston.craigslist.org/bmw/bi...291221843.html
The PX10 series are probably Peugeot's most famous models and classic collectables. The PX10s were competitors to the Raleigh Professionals and the finest Italian bikes of the day. The 1980 Peugeot PXN10E "Super Competition" was the PX10 highest performance bike in the 1980 catalog.
The frame and forks are double butted Reynolds 531 steel.The bike is 58cm measured center of crank to center of top tube and called a 60" by peugeot measured center of crank to top of the seat tube. The bike was built with the finest and most innovative French parts. The rims are 700c Mavice red, green and gold labeled "E type" that were the first high performance clincher rims to perform equal to sew-up rims later copied by Rigida and Super Champion; the hubs are Maillard 700 Professional "Team Issue"; the headset and crankset, model 106, are Stronglight; the bars and stem are ATAV with the engraved Philip Guidons Franco-Italai bars, Spidel side-pull brakes that look like jewelry, Spidel drilled brake levers and Simplex seatpost, and Peugeot badged Simplex SX410TSP rear and SJA 105 front derailleurs. It has the simple Nervex lugs. The forks have chrome socks and crown. The paint has the chips of a used bike but presentable. The saddle is a Brooks Professional as the only known non-original part. The stand over height is 33". It is an affordable collectable historic bike or just a great road bike to ride. The bike has just been serviced and is ready to ride for another 40 years.
Please include a phone number for calls or texts in your response.
Peugeot PXN10 Super Competition - $425 (Newton)
The PX10 series are probably Peugeot's most famous models and classic collectables. The PX10s were competitors to the Raleigh Professionals and the finest Italian bikes of the day. The 1980 Peugeot PXN10E "Super Competition" was the PX10 highest performance bike in the 1980 catalog.The frame and forks are double butted Reynolds 531 steel.The bike is 58cm measured center of crank to center of top tube and called a 60" by peugeot measured center of crank to top of the seat tube. The bike was built with the finest and most innovative French parts. The rims are 700c Mavice red, green and gold labeled "E type" that were the first high performance clincher rims to perform equal to sew-up rims later copied by Rigida and Super Champion; the hubs are Maillard 700 Professional "Team Issue"; the headset and crankset, model 106, are Stronglight; the bars and stem are ATAV with the engraved Philip Guidons Franco-Italai bars, Spidel side-pull brakes that look like jewelry, Spidel drilled brake levers and Simplex seatpost, and Peugeot badged Simplex SX410TSP rear and SJA 105 front derailleurs. It has the simple Nervex lugs. The forks have chrome socks and crown. The paint has the chips of a used bike but presentable. The saddle is a Brooks Professional as the only known non-original part. The stand over height is 33". It is an affordable collectable historic bike or just a great road bike to ride. The bike has just been serviced and is ready to ride for another 40 years.
Please include a phone number for calls or texts in your response.
- do NOT contact me with unsolicited services or offers
__________________
https://rowdml.tripod.com/panmass
https://rowdml.tripod.com/panmass
03-14-21, 10:36 AM
Port
Join Date: Jan 2008
Location: Boston
Posts: 6,648
Bikes: 2022 Soma Fog Cutter, 2021 Calfee Draqonfly 44, 1984 Peter Mooney, 2017 Soma Stanyan, 1990 Fuji Ace, 1990 Bridgestone RB-1, 1995 Independent Fabrications Track, 2003 Calfee Dragonfly Pro
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,852 Times
in
1,055 Posts
https://boston.craigslist.org/gbs/bi...290793734.html
Vintage Trek 660 road bike, 14 speed (2x7), made in USA, 4130 chromoly double butted True Temper steel, purchased from and restored/refurbished by Bikes Not Bombs shop, down tube shifters, with Ultegra Shimano 600 components, including 600 front/rear derailleurs, crankset and brakes, also with in-line brakes incl. on dropbars, Mastrix rims. Vetta Italian racing saddle. Will include for free day-glo Issi pedals (Shimano). I am 5’9” and the size suits me well. See picture for stand over height. Very good, clean condition, with some minor pain scratches etc., consistent with age of frame. A local pick-up and cash sale only.
A hate to part with this beautiful bike, but I need to downsize.
Vintage Trek 660 road bike, very good condition - $530 (Arlington)
Vintage Trek 660 road bike, 14 speed (2x7), made in USA, 4130 chromoly double butted True Temper steel, purchased from and restored/refurbished by Bikes Not Bombs shop, down tube shifters, with Ultegra Shimano 600 components, including 600 front/rear derailleurs, crankset and brakes, also with in-line brakes incl. on dropbars, Mastrix rims. Vetta Italian racing saddle. Will include for free day-glo Issi pedals (Shimano). I am 5’9” and the size suits me well. See picture for stand over height. Very good, clean condition, with some minor pain scratches etc., consistent with age of frame. A local pick-up and cash sale only.A hate to part with this beautiful bike, but I need to downsize.
- do NOT contact me with unsolicited services or offers
__________________
https://rowdml.tripod.com/panmass
https://rowdml.tripod.com/panmass
03-14-21, 10:40 AM
Port
Join Date: Jan 2008
Location: Boston
Posts: 6,648
Bikes: 2022 Soma Fog Cutter, 2021 Calfee Draqonfly 44, 1984 Peter Mooney, 2017 Soma Stanyan, 1990 Fuji Ace, 1990 Bridgestone RB-1, 1995 Independent Fabrications Track, 2003 Calfee Dragonfly Pro
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,852 Times
in
1,055 Posts
Bargain! Mike's frames go for more than double the asking price.
https://boston.craigslist.org/gbs/bo...291174061.html
New never used ANT Sport Touring bike. 56cm, fits 700 x 42mm tires, all mounts needed. Comes with cantilever brakes, headset and rear der.
https://boston.craigslist.org/gbs/bo...291174061.html
ANT Touring frame set - $1,500 (Belmont)
New never used ANT Sport Touring bike. 56cm, fits 700 x 42mm tires, all mounts needed. Comes with cantilever brakes, headset and rear der.- do NOT contact me with unsolicited services or offers
__________________
https://rowdml.tripod.com/panmass
https://rowdml.tripod.com/panmass
03-14-21, 10:58 AM
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,917
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1799 Post(s)
Liked 2,334 Times
in
1,378 Posts
https://minneapolis.craigslist.org/h...291047734.html
Nice looking ride for $250
St Louis Park MN
Outstanding quality Klein road bike, stock original equipped with complete Shimano 105 Group Set, down to the hubs. Perfect mechanical condition, tuned and ready to ride. Excellent cosmetics. Handlebar tape is showing its age, you may want to replace. Porch pickup in Hopkins. Cash or Venmo.
Nice looking ride for $250
St Louis Park MN
Outstanding quality Klein road bike, stock original equipped with complete Shimano 105 Group Set, down to the hubs. Perfect mechanical condition, tuned and ready to ride. Excellent cosmetics. Handlebar tape is showing its age, you may want to replace. Porch pickup in Hopkins. Cash or Venmo.
Likes For WGB:
03-14-21, 11:07 AM
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,917
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1799 Post(s)
Liked 2,334 Times
in
1,378 Posts
Gainseville, FLA (near to Jacksonville
Needs maintenance done and possibly new parts in order to use. This bike is a fixer upper or can be used for scrap parts.
$70 obo
Puch Pursuit Vintage Road Bicycle (Part Bike) - $70 (Gainesville)
https://gainesville.craigslist.org/bik/d/gainesville-puch-pursuit-vintage-road/7290788934.htmlNeeds maintenance done and possibly new parts in order to use. This bike is a fixer upper or can be used for scrap parts.
$70 obo
03-14-21, 11:10 AM
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,446
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,103 Times
in
1,367 Posts
Very custom - price to match
https://sfbay.craigslist.org/eby/bik...290296128.html
By the way - I came across this using the word "stuck" as a search term to see if there were any hidden gems today...
Rock Lobster w/ Action-Tec ProShock - $3,250 (dublin / pleasanton / livermore)
https://sfbay.craigslist.org/eby/bik...290296128.html
By the way - I came across this using the word "stuck" as a search term to see if there were any hidden gems today...
A custom steel Rock Lobster with integrated Action-Tec ProShock, the only bike of its kind fabricated by Paul using steel tubes. That was a $1000 fork bitd. I've owned it nearly 16 years and am the 2nd owner. And it's spent its life riding Santa Cruz single track, as it was designed to do.
I don't have many photos of the bike any longer, but included is one with Jacquie P.'s foot on the down tube while posing in this group shot at China Camp a number of years ago.
Here's the account of its provenance from the friend I got it from in 2005.
============================================
It has been quite a few years so my memory is a bit thin, but I recall the frame was built in 1998. The tubes were all sourced from a single supplier in Sacramento that was located next to the Otis Guy shop, as I recall. I think they were called Nova, and they shipped the tubes directly to Paul Sadoff at Rock Lobster for the fabrication of the frame. The front triangle is an extra light Dedacciai tube set, and at the time it was reported to be the only set in the country, while the rear is comprised of Ritchey WCS as are the dropouts. The frame is “Action Tec red”, primarily because the Action Tec fork was already that color and it was done to match.
The fork came from ”Lambo Mark” in Danville, CA. In the early 90’s he was the Mtn Cycle rep for NorCal and the fork was a sample used at Interbike in 94/95. At the time Mtn Cycle frames all required forks with 1.25” steerers and coincidentally provided the correct head tube length for the threaded/threadless setup of the fork. But the fork was never installed or ridden on a Mtn Cycle, or any bike, and was only used for display at shows. I suspect that the uniqueness of the 1.25” steerer spec shared between fork and Mtn Cycle may be why Lambo Mark ended up with it, as he was not the Action Tec rep, nor was anyone at the time. I got the fork by trading a new Manitou fork to him for use on his child’s bike.
Both Paul and Mike Ahrens (later of Ahrens Design, but at that time an engineering student) collaborated on the frame design and geometry, while Paul fabricated it. While this was in process, the fork was sent to Action Tec to be refreshed with the latest 90s updates. And as alluded to earlier, one of the issues with the Action Tec fork is the size of the head tube required to house it. At the time there was only one person I knew who had the necessary Chris King tools required to face a head tube of that size – Chris Kelly of Kelly Bikes in Oakland. It was a bit of an ordeal getting it done, frankly, and cost $100 for the 5-minute job, but I was stuck and left with few options at the time.
The Chris King headset is the same vintage as the fork and has always been with that fork. All the Moots ti bits were sourced straight from Moots, and the handlebars are one of the very first sets of ti risers they ever manufactured. The BB is a Phil Wood ti model that I picked up directly from Phil in San Jose. I was good friends with the rep from RaceFace so he went into the display cases in the lobby of RF in Canada and took the mismatched set of (Harlequin) cranks from there. They were never even packaged for sale. The WCS wheel set came directly from Ritchey, having gone across the bay and hand-picking those myself, as well as the original 2x9 setup they used to make (shifters + 2x chain rings + 9th cog).
- BW, 12/2020
I don't have many photos of the bike any longer, but included is one with Jacquie P.'s foot on the down tube while posing in this group shot at China Camp a number of years ago.
Here's the account of its provenance from the friend I got it from in 2005.
============================================
It has been quite a few years so my memory is a bit thin, but I recall the frame was built in 1998. The tubes were all sourced from a single supplier in Sacramento that was located next to the Otis Guy shop, as I recall. I think they were called Nova, and they shipped the tubes directly to Paul Sadoff at Rock Lobster for the fabrication of the frame. The front triangle is an extra light Dedacciai tube set, and at the time it was reported to be the only set in the country, while the rear is comprised of Ritchey WCS as are the dropouts. The frame is “Action Tec red”, primarily because the Action Tec fork was already that color and it was done to match.
The fork came from ”Lambo Mark” in Danville, CA. In the early 90’s he was the Mtn Cycle rep for NorCal and the fork was a sample used at Interbike in 94/95. At the time Mtn Cycle frames all required forks with 1.25” steerers and coincidentally provided the correct head tube length for the threaded/threadless setup of the fork. But the fork was never installed or ridden on a Mtn Cycle, or any bike, and was only used for display at shows. I suspect that the uniqueness of the 1.25” steerer spec shared between fork and Mtn Cycle may be why Lambo Mark ended up with it, as he was not the Action Tec rep, nor was anyone at the time. I got the fork by trading a new Manitou fork to him for use on his child’s bike.
Both Paul and Mike Ahrens (later of Ahrens Design, but at that time an engineering student) collaborated on the frame design and geometry, while Paul fabricated it. While this was in process, the fork was sent to Action Tec to be refreshed with the latest 90s updates. And as alluded to earlier, one of the issues with the Action Tec fork is the size of the head tube required to house it. At the time there was only one person I knew who had the necessary Chris King tools required to face a head tube of that size – Chris Kelly of Kelly Bikes in Oakland. It was a bit of an ordeal getting it done, frankly, and cost $100 for the 5-minute job, but I was stuck and left with few options at the time.
The Chris King headset is the same vintage as the fork and has always been with that fork. All the Moots ti bits were sourced straight from Moots, and the handlebars are one of the very first sets of ti risers they ever manufactured. The BB is a Phil Wood ti model that I picked up directly from Phil in San Jose. I was good friends with the rep from RaceFace so he went into the display cases in the lobby of RF in Canada and took the mismatched set of (Harlequin) cranks from there. They were never even packaged for sale. The WCS wheel set came directly from Ritchey, having gone across the bay and hand-picking those myself, as well as the original 2x9 setup they used to make (shifters + 2x chain rings + 9th cog).
- BW, 12/2020
__________________
Genesis 49:16-17
Genesis 49:16-17
03-14-21, 11:13 AM
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,917
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1799 Post(s)
Liked 2,334 Times
in
1,378 Posts
https://klamath.craigslist.org/bik/d...291261367.html
Klamath Falls, Oregon - Nice long cage RD. Pictures suck
Klamath Falls, Oregon - Nice long cage RD. Pictures suck
Vintage Bianchi - $85
Vintage bianchi road bike in great condition and everything works comes with air pump not riding enough to keep it
03-14-21, 11:17 AM
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,917
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1799 Post(s)
Liked 2,334 Times
in
1,378 Posts
https://amarillo.craigslist.org/bik/...291206716.html
(Might help know how to adjust rod brakes....) I can't see if it's a Brooks with the tag fallen off or not
Vintage RALEIGH bicycle made in 1976 Nottingham England.
Completely rebuilt with new leather seat and 3 speed shift mechanism.
Only reason I’m selling is because I’m 6’3 and it’s just too small for me.
I would guess it would be fine for an average height guy or gal.
Price is firm; it’s less than what I have put in it....
(Might help know how to adjust rod brakes....) I can't see if it's a Brooks with the tag fallen off or not
Cool British Bike - $200 (Amarillo)
Vintage RALEIGH bicycle made in 1976 Nottingham England.
Completely rebuilt with new leather seat and 3 speed shift mechanism.
Only reason I’m selling is because I’m 6’3 and it’s just too small for me.
I would guess it would be fine for an average height guy or gal.
Price is firm; it’s less than what I have put in it....
03-14-21, 11:19 AM
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,917
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1799 Post(s)
Liked 2,334 Times
in
1,378 Posts
https://minneapolis.craigslist.org/h...291258793.html
Trek 500 - $80
Great light weight older road bike mostly original parts. Ready to ride but has not been tune/new tire etc. So the price is reflected.
Frame is in great shape with some chipped paint.
Its too small for me I'm 6 ft.
23 inch frame 27 inc tires
Trek 500 - $80
Great light weight older road bike mostly original parts. Ready to ride but has not been tune/new tire etc. So the price is reflected.
Frame is in great shape with some chipped paint.
Its too small for me I'm 6 ft.
23 inch frame 27 inc tires
03-14-21, 11:23 AM
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,917
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1799 Post(s)
Liked 2,334 Times
in
1,378 Posts
https://detroit.craigslist.org/mcb/b...290810785.html
Braze ons for front rack, fenders, three water bottle cages and pump peg
Dia Compe 960 cantilever brakes, San Marco touring anatomic saddle, SR CXC triple chain rings, SR Laprade 26.6 fluted seat post, Weinmann 416 alloy rims, more
This bike is very, very clean, however it does have some nicks and paint wear in spots. The price reflects this. All the bike needs is a rider.
$198
1986 Schwinn Passage Tourer - Hard to Find - Nice and Maintained!!! - $198 (Harrison Township)
Rare 1986 Schwinn Passage touring bike. Lightweight 23" Columbus Tenax frame. 25 lbs. Very well maintained.New tires, new bar tape, new Jaguar brake lines and cables. Rear rack with rack trunk included.Braze ons for front rack, fenders, three water bottle cages and pump peg
Dia Compe 960 cantilever brakes, San Marco touring anatomic saddle, SR CXC triple chain rings, SR Laprade 26.6 fluted seat post, Weinmann 416 alloy rims, more
This bike is very, very clean, however it does have some nicks and paint wear in spots. The price reflects this. All the bike needs is a rider.
$198
Likes For WGB:
03-14-21, 12:17 PM
Port
Join Date: Jan 2008
Location: Boston
Posts: 6,648
Bikes: 2022 Soma Fog Cutter, 2021 Calfee Draqonfly 44, 1984 Peter Mooney, 2017 Soma Stanyan, 1990 Fuji Ace, 1990 Bridgestone RB-1, 1995 Independent Fabrications Track, 2003 Calfee Dragonfly Pro
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,852 Times
in
1,055 Posts
$50 Trek? Can't go wrong here.
https://www.facebook.com/marketplace...etplace_search
Men’s bike
$50
Preston, CT
Location is approximate
https://www.facebook.com/marketplace...etplace_search
Men’s bike
$50
Preston, CT
Location is approximate
__________________
https://rowdml.tripod.com/panmass
https://rowdml.tripod.com/panmass
03-14-21, 12:48 PM
Port
Join Date: Jan 2008
Location: Boston
Posts: 6,648
Bikes: 2022 Soma Fog Cutter, 2021 Calfee Draqonfly 44, 1984 Peter Mooney, 2017 Soma Stanyan, 1990 Fuji Ace, 1990 Bridgestone RB-1, 1995 Independent Fabrications Track, 2003 Calfee Dragonfly Pro
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,852 Times
in
1,055 Posts
531 frame, Shimano 600.... 
__________________
https://rowdml.tripod.com/panmass
https://rowdml.tripod.com/panmass
03-14-21, 03:52 PM
Senior Member
Join Date: Nov 2013
Location: Big Apple
Posts: 1,428
Bikes: yes
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 512 Post(s)
Likes: 0
Liked 409 Times
in
176 Posts
03-14-21, 05:18 PM
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,917
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1799 Post(s)
Liked 2,334 Times
in
1,378 Posts
Spelling correct for ad
Swchinn Ontare 54cm road bike
$150
Hobbies
›
Specialized Stumpjumper Mountain Bikes
Listed 2 days ago in Overland Park, KS
Vintage schwinn Ontare sunset colorway bike. Super rare and sought after frame. I’ve got too many projects right now so this one has to go. The crankset seems to be bent and I’d suggest replacement rings. $150
Swchinn Ontare 54cm road bike
$150
Hobbies
›
Specialized Stumpjumper Mountain Bikes
Listed 2 days ago in Overland Park, KS
Vintage schwinn Ontare sunset colorway bike. Super rare and sought after frame. I’ve got too many projects right now so this one has to go. The crankset seems to be bent and I’d suggest replacement rings. $150
03-14-21, 05:19 PM
Senior Member
Join Date: Jan 2010
Location: se MIch.
Posts: 2,305
Bikes: 1938 claud butler,1983 Basso,teledyne titan,teocali super,nrs,1993 stumpjumper fsr,Paramountain,Paramount Buell(sold),4 banger,Zaskar LE,Colnago Master Ibex MTB,1987ish,.etc....
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 802 Post(s)
Liked 2,976 Times
in
1,496 Posts
03-14-21, 06:06 PM
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,917
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1799 Post(s)
Liked 2,334 Times
in
1,378 Posts
The condition of this one stuns me. I get that the 400 is not high in the Trek rank structure, but what do you get today at a store that's new for $150?
https://www.facebook.com/marketplace...etplace_search
Trek 400 series classic road bike
$150$250
Hobbies
›
Specialized Stumpjumper Mountain Bikes
Listed 6 days ago in Longmont, CO
MessageDetails
https://www.facebook.com/marketplace...etplace_search
Trek 400 series classic road bike
$150$250
Hobbies
›
Specialized Stumpjumper Mountain Bikes
Listed 6 days ago in Longmont, CO
MessageDetails
- Condition
Used - Like New - Brand
Trek
Likes For WGB:
03-14-21, 06:12 PM
Senior Member
Join Date: Oct 2015
Location: SE Wisconsin
Posts: 774
Bikes: Trek 970, Bianchi Volpe,Casati
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 357 Post(s)
Liked 121 Times
in
87 Posts
03-14-21, 07:20 PM
Senior Member
Join Date: Nov 2013
Location: South of the Twin Cities, MN
Posts: 4,122
Mentioned: 29 Post(s)
Tagged: 1 Thread(s)
Quoted: 1119 Post(s)
Liked 2,254 Times
in
1,311 Posts
03-14-21, 07:26 PM
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,795
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2436 Post(s)
Liked 3,119 Times
in
1,962 Posts
my Randonneur!!!!!!!!!!!
https://klamath.craigslist.org/bik/d...291261367.html
Klamath Falls, Oregon - Nice long cage RD. Pictures suck
Klamath Falls, Oregon - Nice long cage RD. Pictures suck
Vintage Bianchi - $85
Vintage bianchi road bike in great condition and everything works comes with air pump not riding enough to keep it
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
03-14-21, 07:32 PM
Senior Member
Join Date: Nov 2013
Location: South of the Twin Cities, MN
Posts: 4,122
Mentioned: 29 Post(s)
Tagged: 1 Thread(s)
Quoted: 1119 Post(s)
Liked 2,254 Times
in
1,311 Posts
Likes For Clang:
03-14-21, 07:36 PM
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,795
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2436 Post(s)
Liked 3,119 Times
in
1,962 Posts
Aelle deBernardi for $100. Wowzers...
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
03-14-21, 07:36 PM
Senior Member
Join Date: Nov 2013
Location: South of the Twin Cities, MN
Posts: 4,122
Mentioned: 29 Post(s)
Tagged: 1 Thread(s)
Quoted: 1119 Post(s)
Liked 2,254 Times
in
1,311 Posts
BOTTECCHIA and trico sport iron case - $200 (Lovettsville, VA)
https://www.facebook.com/marketplace...etplace_search
https://www.facebook.com/marketplace...etplace_search
Likes For Clang:
03-14-21, 07:41 PM
Senior Member
Join Date: Nov 2013
Location: South of the Twin Cities, MN
Posts: 4,122
Mentioned: 29 Post(s)
Tagged: 1 Thread(s)
Quoted: 1119 Post(s)
Liked 2,254 Times
in
1,311 Posts
Team Fuji & Club Fuji
Fuji racing bikes - $75 (Eustis, FL)
https://www.facebook.com/marketplace...etplace_search
Fuji racing bikes - $75 (Eustis, FL)
https://www.facebook.com/marketplace...etplace_search
Likes For Clang: