Is this hub and hoop worth hanging onto?
#1
Senior Member
Thread Starter
Is this hub and hoop worth hanging onto?
At my local bicycle junkyard I found a complete wheel laying in his many many piles of old wheels. It was hanging in my garage doing nothing and I’m not even sure why I grabbed in the first place. I’ve been on the beer view mirror building kick so I stripped all the spokes out of this old rim and experimented with making my own mirrors. I was just getting ready to go throw it in the trash when I noticed it had some writing on it. Apparently this is a French rim and hub . The hub says Normandie made in France. And the rim says rigida chrolux chromage superieur. 27x1/14 made in France. It is a steel rim and I was just wondering if this thing is worth hanging onto for any reason or if I can feel safe throwing it in the trash.
#2
Senior Member
Join Date: Mar 2012
Location: Niagara Region, Canada
Posts: 1,452
Bikes: 1970s Alex Singer, 1960s Peugeot PX 10, 1960s Bertin C37, 1973 Carre Bertin C 37, 1972 Carlton Kermesse, 1981 Peugeot PX 14 Super Competition
Mentioned: 65 Post(s)
Tagged: 0 Thread(s)
Quoted: 344 Post(s)
Liked 266 Times
in
157 Posts
trail monkey -
The hub might be worth keeping as spare parts if the cups and cones are good. The rim is chromed steel and 27 x 1 1/4 which is a seldom used size. As well, these rims are heavy, have poor wet braking performance and don't take hook bead tires. Yes to the hub (maybe) and no to the steel rim (definitely).
The hub might be worth keeping as spare parts if the cups and cones are good. The rim is chromed steel and 27 x 1 1/4 which is a seldom used size. As well, these rims are heavy, have poor wet braking performance and don't take hook bead tires. Yes to the hub (maybe) and no to the steel rim (definitely).
#3
Senior Member
Thread Starter
trail monkey -
The hub might be worth keeping as spare parts if the cups and cones are good. The rim is chromed steel and 27 x 1 1/4 which is a seldom used size. As well, these rims are heavy, have poor wet braking performance and don't take hook bead tires. Yes to the hub (maybe) and no to the steel rim (definitely).
The hub might be worth keeping as spare parts if the cups and cones are good. The rim is chromed steel and 27 x 1 1/4 which is a seldom used size. As well, these rims are heavy, have poor wet braking performance and don't take hook bead tires. Yes to the hub (maybe) and no to the steel rim (definitely).
#4
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,627
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 2,563 Times
in
1,577 Posts
#5
Senior Member
Thread Starter
Yeah I think I’m going to ask the wife tonight if she need some hoops for any garden project before I do and if she says no they’re going in the trash
#6
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
About 12 years ago, my son built a chair for a grade 7 project, using old rims from my shop. It's still intact and functional, despite heavy use for a 5-6 year period, as his perch for his video game drum kit. By the end of this period he was 6'2" and 190 lbs, so it's plenty sturdy. So, there are practical uses for old rims, if you use your imagination...
#7
Senior Member
Thread Starter
About 12 years ago,my son built a chair for a grade 7 project, using old rims from my shop. It's still intact and functional, despite heavy use for a 5-6 year period, as his perch for his video game drum kit. By the end of this period he was 6'2" and 190 lbs, so it's plenty sturdy. So, there are practical uses for old rims,if you use your imagination...
#9
Senior Member
Thread Starter
#10
kVp & m*s
Join Date: Jul 2015
Location: Upstate NY
Posts: 311
Bikes: Schwinn Paramount... someday
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 101 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Out of all the obsolete chromed steel rims, Rigida's are my favorite. I wouldn't hang on to it though.
Lovin' the creativity in this thread!
Lovin' the creativity in this thread!
#11
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,627
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 2,563 Times
in
1,577 Posts
There's a fellow in Illinois who makes those kind of mirrors under the "Flatlander" name. Great guy, and my PBR mirror always gets a smile.
https://www.etsy.com/shop/FlatlandersMirrors
https://www.etsy.com/shop/FlatlandersMirrors
#12
Partially Sane.
Join Date: Jan 2016
Location: Sunny Sacramento.
Posts: 3,559
Bikes: Soma Saga, pre-disc
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 972 Post(s)
Likes: 0
Liked 643 Times
in
468 Posts
About 12 years ago, my son built a chair for a grade 7 project, using old rims from my shop. It's still intact and functional, despite heavy use for a 5-6 year period, as his perch for his video game drum kit. By the end of this period he was 6'2" and 190 lbs, so it's plenty sturdy. So, there are practical uses for old rims, if you use your imagination...
#13
Senior Member
I kind of like how they shine. The Sturmey's on my 50 year old Hercules convinced me to go ahead and use some Arayas I had handy on the Surly, shown before it was taped. Thinking about putting a cottered crank on it.
Partially because I like the look, and partially out of sheer cussedness.
(edit) That said, I'm not a real fan of the Normany high flange hubs ... the Sanshin/Sunshine (IIRC) are just as available at a co-op, and I believe use a little bigger ball bearings and maybe a slightly harder bearing race on the axle. I could be wrong. Make a pencil holder out of it.
Partially because I like the look, and partially out of sheer cussedness.
(edit) That said, I'm not a real fan of the Normany high flange hubs ... the Sanshin/Sunshine (IIRC) are just as available at a co-op, and I believe use a little bigger ball bearings and maybe a slightly harder bearing race on the axle. I could be wrong. Make a pencil holder out of it.
#14
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,182
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1562 Post(s)
Liked 1,288 Times
in
859 Posts
It's common when refurbishing an original UO8 or similar to need one of those exact hoops, usually for the rear wheel.
It has monetary value on Ebay even, if it is ding-free and is straight/round.
This 1968 Sears rebuild needed a single hoop and I'm happy to have kept it mostly original!
It has monetary value on Ebay even, if it is ding-free and is straight/round.
This 1968 Sears rebuild needed a single hoop and I'm happy to have kept it mostly original!
#15
Senior Member
Join Date: Jul 2009
Posts: 786
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 384 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
It's common when refurbishing an original UO8 or similar to need one of those exact hoops, usually for the rear wheel.
It has monetary value on Ebay even, if it is ding-free and is straight/round.
This 1968 Sears rebuild needed a single hoop and I'm happy to have kept it mostly original!
It has monetary value on Ebay even, if it is ding-free and is straight/round.
This 1968 Sears rebuild needed a single hoop and I'm happy to have kept it mostly original!
#16
Senior Member
Join Date: Aug 2015
Location: AZ/WA
Posts: 2,403
Bikes: Yes
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 460 Post(s)
Liked 54 Times
in
30 Posts
About 12 years ago, my son built a chair for a grade 7 project, using old rims from my shop. It's still intact and functional, despite heavy use for a 5-6 year period, as his perch for his video game drum kit. By the end of this period he was 6'2" and 190 lbs, so it's plenty sturdy. So, there are practical uses for old rims, if you use your imagination...
I thought for a while maybe you were an experimental Google AI system or something. Awesome project.
Those, I would wear. Bud Light of course.
#17
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
The rims were straightened by cold setting with bicycle frame alignment tools. There is slight waviness but given the application, it is acceptable.
#18
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
I think this says very little about me but speaks volumes about my son. I was far less involved in this project than most people assume.
#19
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,793
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1391 Post(s)
Liked 1,322 Times
in
835 Posts
If those were mine, I would re-gift or recycle them. Too many bike parts (and other things) and too little space around my house, garage, and shed.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#20
Senior Member
Thread Starter
Originally Posted by Bikerider007
Bud Light of course.
#21
Partially Sane.
Join Date: Jan 2016
Location: Sunny Sacramento.
Posts: 3,559
Bikes: Soma Saga, pre-disc
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 972 Post(s)
Likes: 0
Liked 643 Times
in
468 Posts
I remember in 7th grade, gluing wood together & clamping it, then making obscenely oversized dice out of it. The tricky part, was drilling the holes straight, on each side.
#22
Senior Member
Join Date: Aug 2015
Location: AZ/WA
Posts: 2,403
Bikes: Yes
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 460 Post(s)
Liked 54 Times
in
30 Posts
Just not a beer of the week type drinker. When I have a long day and that first sip hits, it's like the bikes many here collector from their childhood, just takes me back to a good memory and puts a smile on my face.
Fancy beer drinkers talk flavor, hops and gasses or whatever and feel cool....blah blah. I've sat with many of them, BL in hand, while they chatter like hens about this or that flavor. But there is no other taste like Bud Light, it's magical.
I just made you want a BL didn't I
On topic. The hub and hoop are not uncommon.
#23
Senior Member
Thread Starter
Just not a beer of the week type drinker. When I have a long day and that first sip hits, it's like the bikes many here collector from their childhood, just takes me back to a good memory and puts a smile on my face.
Fancy beer drinkers talk flavor, hops and gasses or whatever and feel cool....blah blah. I've sat with many of them, BL in hand, while they chatter like hens about this or that flavor. But there is no other taste like Bud Light, it's magical.
I just made you want a BL didn't I
On topic. The hub and hoop are not uncommon.
Fancy beer drinkers talk flavor, hops and gasses or whatever and feel cool....blah blah. I've sat with many of them, BL in hand, while they chatter like hens about this or that flavor. But there is no other taste like Bud Light, it's magical.
I just made you want a BL didn't I
On topic. The hub and hoop are not uncommon.