Need replacement MTB wheel
#1
Keepin it Wheel
Thread Starter
Join Date: Aug 2011
Location: San Diego
Posts: 10,245
Bikes: Surly CrossCheck, Krampus
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Liked 3,424 Times
in
2,532 Posts
Need replacement MTB wheel
Hey all,
I need to replace a front wheel on this bike, 29, should be tubeless-compatible and a suitable width for Maxxis Ardent 2.4, I forget how-many-bolt disc rotor. Fork spec says 15x100 Maxle Lite, but starting to search I was getting all confused about QR vs newer 15mm seems to all be boost, couldn't tell what was what.
I'd like to keep it in the lower $100s, nobody's doing any racing over here.
Any suggestions?
I need to replace a front wheel on this bike, 29, should be tubeless-compatible and a suitable width for Maxxis Ardent 2.4, I forget how-many-bolt disc rotor. Fork spec says 15x100 Maxle Lite, but starting to search I was getting all confused about QR vs newer 15mm seems to all be boost, couldn't tell what was what.
I'd like to keep it in the lower $100s, nobody's doing any racing over here.
Any suggestions?
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,063
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4197 Post(s)
Liked 3,849 Times
in
2,300 Posts
Have you tried your LBS, in SD, CA i would think there would be a few. If you can't make sense of the specs needed to match up than go to a pro. Andy
__________________
AndrewRStewart
AndrewRStewart
Likes For Andrew R Stewart:
#3
Guest
Join Date: Sep 2020
Posts: 2,888
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1346 Post(s)
Liked 3,270 Times
in
1,439 Posts
Dude! Reach out to the guy at SD-MTB: https://www.pinkbike.com/u/sd-mtb/
He's in San Diego, and he very recently built me an awesome wheelset at a very fair price. I can't for the life of me remember his name, but send him a PM through Pinkbike and tell him what you're looking for. He'll flesh out the missing specs and give you a few choices of rims and hubs that will work with your axle spacing, tire width, etc.
No affiliation, just a real happy customer.
He's in San Diego, and he very recently built me an awesome wheelset at a very fair price. I can't for the life of me remember his name, but send him a PM through Pinkbike and tell him what you're looking for. He'll flesh out the missing specs and give you a few choices of rims and hubs that will work with your axle spacing, tire width, etc.
No affiliation, just a real happy customer.
Last edited by Rolla; 10-03-22 at 09:47 PM.