Batteries and LEDs
#1
Full Member
Thread Starter
Batteries and LEDs
been researching bike lights, and scuba diving lights also for bad weather riding.
a lot of them are based on the same parts,
for instance, a lot of light makers base their lamps on the 18650 rechargeable Lithium Ion battery.
this page talks about the 18650>
https://commonsensehome.com/18650-ba...%20unprotected.
LED's:
a lot of the torch makers use the same LED's , a lot of them are made by Cree.
here is their webpage>
https://cree-led.com/
that is all.
a lot of them are based on the same parts,
for instance, a lot of light makers base their lamps on the 18650 rechargeable Lithium Ion battery.
this page talks about the 18650>
https://commonsensehome.com/18650-ba...%20unprotected.
LED's:
a lot of the torch makers use the same LED's , a lot of them are made by Cree.
here is their webpage>
https://cree-led.com/
that is all.
#2
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,546
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5223 Post(s)
Liked 3,577 Times
in
2,341 Posts
I used to go night diving, even during storms. that was fun. but I wouldn't use a SCUBA light on a bike. too heavy
#3
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,948
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6176 Post(s)
Liked 4,794 Times
in
3,306 Posts
I just love mystery posts where we have to draw our own conclusion to why the OP was even made.
Likes For Iride01:
#4
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,465
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1825 Post(s)
Liked 3,367 Times
in
1,573 Posts
I've used Cree LEDs in my home-built lights for many years now, and they have been great. I haven't kept up on things for 10 years now, and am not sure who is coming out with the latest and greatest parts.
For instance... I've got a dead B&M Eyc that I hope to use for experiments. The main LED is in a package that's not familiar to me. Anyone familiar with it? (it is the middle of the three LEDs in this photo).
The LED package is about 0.1 inch (about 3mm) on a side. The area with the phosphors must be closer to 1mm on a side.
Steve in Peoria
For instance... I've got a dead B&M Eyc that I hope to use for experiments. The main LED is in a package that's not familiar to me. Anyone familiar with it? (it is the middle of the three LEDs in this photo).
The LED package is about 0.1 inch (about 3mm) on a side. The area with the phosphors must be closer to 1mm on a side.
Steve in Peoria
#5
Zoom zoom zoom zoom bonk
Join Date: Sep 2006
Location: New Zealand
Posts: 4,624
Bikes: Giant Defy, Trek 1.7c, BMC GF02, Fuji Tahoe, Scott Sub 35, Kona Rove, Trek Verve+2
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 551 Post(s)
Liked 722 Times
in
366 Posts
I've used Cree LEDs in my home-built lights for many years now, and they have been great. I haven't kept up on things for 10 years now, and am not sure who is coming out with the latest and greatest parts.
For instance... I've got a dead B&M Eyc that I hope to use for experiments. The main LED is in a package that's not familiar to me. Anyone familiar with it? (it is the middle of the three LEDs in this photo).
For instance... I've got a dead B&M Eyc that I hope to use for experiments. The main LED is in a package that's not familiar to me. Anyone familiar with it? (it is the middle of the three LEDs in this photo).
https://nz.rs-online.com/web/p/leds/8769303/
PS, Have you noticed that a lot of cars use petrol in their tanks and rubber on their wheels? Interesting isn't it?
#6
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,465
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1825 Post(s)
Liked 3,367 Times
in
1,573 Posts
That's an Osram Opto Oslon Black flat
https://nz.rs-online.com/web/p/leds/8769303/
PS, Have you noticed that a lot of cars use petrol in their tanks and rubber on their wheels? Interesting isn't it?
https://nz.rs-online.com/web/p/leds/8769303/
PS, Have you noticed that a lot of cars use petrol in their tanks and rubber on their wheels? Interesting isn't it?
When I meter out the LED with Fluke in diode mode, I'm not getting the LED to illuminate at all, and the forward voltage is rather low in both directions. Maybe that's why the light is dead?? Or it might be the LED driving circuitry that is dead.
Either way, it's nice to have the datasheet for the LED. I was thinking of using a home-brew driver circuit and running it at more than 3W. Since the datasheet says it can run at 1500mA, it might be possible to get 4.5W out of it. Might need a bigger heatsink, though.
Steve in Peoria