Which Disc Brake Adapter
11-13-21, 11:40 AM
#1
For The Fun of It
Thread Starter
Join Date: May 2007
Location: Louisissippi Coast
Posts: 5,205
Bikes: Lynskey GR300, Lynskey Backroad, Litespeed T6, Lynskey MT29, Burley Duet
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 1750 Post(s)
Liked 1,060 Times
in
544 Posts
Which Disc Brake Adapter
Pictured is my front fork. I ordered a TRP Spyke long pull brake 180mm rotor combo. Which adapter will I need for the pictured fork? Since I am kinda dense, a link to what I need rather than a verbal description would be awesome. I have searched high and low, and I have no idea what to get.
11-13-21, 03:34 PM
#2
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,246
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 1815 Post(s)
Likes: 0
Liked 751 Times
in
546 Posts
Your fork appears to use a "flat mount" caliper and the Spyke (now discontinued it seems) used a post mount so your fork is incompatible with them. Also, flat mounts are limited to 160mm rotors so your 180mm rotors won't work either.
Adapters for flat mount brakes like the TRP Spyre are readily available and shown on the TRP web site.
Adapters for flat mount brakes like the TRP Spyre are readily available and shown on the TRP web site.
11-14-21, 01:34 AM
#3
Senior Member
Join Date: Aug 2006
Posts: 1,859
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 165 Post(s)
Likes: 0
Liked 49 Times
in
38 Posts
It probably isn't recommended to use a 180mm rotor on that fork.
If you really wanted to do it, you could attach a P20 (160 to 180mm) post mount to post mount adapter onto the 160mm flat mount to post mount adapter.
FM to PM: https://trpcycling.com/product/flat-...mount-adapter/
PM to PM: https://trpcycling.com/product/new-p...otor-adapters/
If you really wanted to do it, you could attach a P20 (160 to 180mm) post mount to post mount adapter onto the 160mm flat mount to post mount adapter.
FM to PM: https://trpcycling.com/product/flat-...mount-adapter/
PM to PM: https://trpcycling.com/product/new-p...otor-adapters/
11-14-21, 05:54 AM
#4
For The Fun of It
Thread Starter
Join Date: May 2007
Location: Louisissippi Coast
Posts: 5,205
Bikes: Lynskey GR300, Lynskey Backroad, Litespeed T6, Lynskey MT29, Burley Duet
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 1750 Post(s)
Liked 1,060 Times
in
544 Posts
Originally Posted by cobba
It probably isn't recommended to use a 180mm rotor on that fork.
If you really wanted to do it, you could attach a P20 (160 to 180mm) post mount to post mount adapter onto the 160mm flat mount to post mount adapter.
FM to PM: https://trpcycling.com/product/flat-...mount-adapter/
PM to PM: https://trpcycling.com/product/new-p...otor-adapters/
If you really wanted to do it, you could attach a P20 (160 to 180mm) post mount to post mount adapter onto the 160mm flat mount to post mount adapter.
FM to PM: https://trpcycling.com/product/flat-...mount-adapter/
PM to PM: https://trpcycling.com/product/new-p...otor-adapters/
The back and front brakes run the same TRP caliper. The rear rotor is 160. Could I order a 160 rotor and run it with that 160 flat to post adapter?
11-15-21, 07:58 AM
#5
Senior Member
Join Date: Jan 2013
Location: South Jersey
Posts: 2,062
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 628 Post(s)
Liked 577 Times
in
362 Posts
Originally Posted by Paul Barnard
The back and front brakes run the same TRP caliper. The rear rotor is 160. Could I order a 160 rotor and run it with that 160 flat to post adapter?
11-15-21, 09:52 AM
#6
For The Fun of It
Thread Starter
Join Date: May 2007
Location: Louisissippi Coast
Posts: 5,205
Bikes: Lynskey GR300, Lynskey Backroad, Litespeed T6, Lynskey MT29, Burley Duet
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 1750 Post(s)
Liked 1,060 Times
in
544 Posts
Originally Posted by dsaul
Yes. You need to make sure you order a front specific adapter, since the bolt hole spacing is different for front and rear flat mount.
Likes For Paul Barnard:
11-18-21, 03:24 PM
#7
For The Fun of It
Thread Starter
Join Date: May 2007
Location: Louisissippi Coast
Posts: 5,205
Bikes: Lynskey GR300, Lynskey Backroad, Litespeed T6, Lynskey MT29, Burley Duet
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 1750 Post(s)
Liked 1,060 Times
in
544 Posts
Originally Posted by dsaul
Yes. You need to make sure you order a front specific adapter, since the bolt hole spacing is different for front and rear flat mount.
Likes For Paul Barnard:
