chip in my carbon wheel
#1
Senior Member
Thread Starter
Join Date: Mar 2016
Location: South Italy
Posts: 1,010
Bikes: BMC SLR01; Cannondale Trail; Lot's of project and vintage bikes..
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 167 Times
in
101 Posts
chip in my carbon wheel
Today i was replacing my tubulars on my prime rr-50 wheels , and i saw this surprice https://drive.google.com/file/d/11GK...ew?usp=sharing
I used the "effetto mariposa - carogna" gluing tape since is one of the most good-rated type of tubular-glue (also kinda expensive as well since the tape vost 19$ and the glue 3$).
But i belive that is not caused from the tape , maybe a little defct on the wheels?
- Is the the wheel safe to ride?
- What can cause this kind of damage?
ps. i already sent an email to the support.
I used the "effetto mariposa - carogna" gluing tape since is one of the most good-rated type of tubular-glue (also kinda expensive as well since the tape vost 19$ and the glue 3$).
But i belive that is not caused from the tape , maybe a little defct on the wheels?
- Is the the wheel safe to ride?
- What can cause this kind of damage?
ps. i already sent an email to the support.
#2
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,354
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,945 Times
in
1,906 Posts
what caused the need for replacing the tire?
Did you ride on an underinflated tire or flat/bead rolling off the rim?
Did you ride on an underinflated tire or flat/bead rolling off the rim?
__________________
-Oh Hey!
-Oh Hey!
#6
Senior Member
Join Date: Apr 2012
Location: Nor Cal
Posts: 6,016
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1814 Post(s)
Likes: 0
Liked 923 Times
in
569 Posts
The clear coat pulled up where it goes over a sticker, likely from the tape. Nail polish might pull up again, but NBD.
I've done various CF touch ups, a DIY frame repair, and nursed carbon tubulars to the bitter end by adding epoxy to worn thin brake tracks, etc. etc..
Forks, steerer tubes, and handle bars call for a more conservative approach, but in general, the sky is not falling. A lifetime of building/making stuff and many years of hanging from bits of metal and webbing thousands of feet in the air while rock climbing provide real-world risk assessment that I'm confident in.
#7
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
OP this should very obviously posted in 'bicycle mechanics' NOT general discussion. There are different forum sections for a reason.
#9
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,465
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4332 Post(s)
Liked 3,957 Times
in
2,645 Posts
cxwrench is correct and also post the picture here. I waited 30 seconds and it didn't load. No need to put it elsewhere just upload here so we can easily see it.
#11
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,843
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 927 Times
in
612 Posts
Moved from General.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
#12
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,843
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 927 Times
in
612 Posts
Where's the problem? At the 24H sticker ?
Looks like some delamination that shouldn't happen.
Looks like some delamination that shouldn't happen.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html