Schwinns!
#1
Full Member
Thread Starter
Schwinns!
I find myself inundated in Schwinns. None particularly high end, nearly all of them more than 25 years old. All enjoyable for different reasons. Didn't set out to be this way, but I guess I've become a Schwinn guy...
And, I'd love to see YOURS too. Post 'em up. I didn't see such a thread already, apologies if I missed it.
'73 Varsity Single Speed conversion

'88 Woodlands

'88 Predator Aerostar - about exactly the same spec as my first ever bike

My son's '86 Predator Aerostar, with my '88 Woodlands behind it. Shame he's already outgrowing it, but such is life.

Son's December 1980 dated 24" wheeled Sprint. The 24" wheel sprint didn't show up in the catalog until '82, guess they made too many 24" wheel Varsity frames in '80...

'01 Mesa GSX that I converted to more of a townie. I bought this bike new. It's the LAST of the actual Schwinns before they got sold to Pacific and the only Mesa to get a full Deore group. Since the Woodlands has arrived, I'm thinking of putting more aggressive tires back on it and altering my positioning on it. Will still keep it rigid though, as good suspension is way more expensive than the bike is worth, although I did not discard the original Manitou Magnum fork. Maybe I'll look into a rebuild kit instead...

There's a Continental I saw on Marketplace that I want pretty badly but I really can't... I'm out of space, would need to sell something else.
And, I'd love to see YOURS too. Post 'em up. I didn't see such a thread already, apologies if I missed it.
'73 Varsity Single Speed conversion

'88 Woodlands

'88 Predator Aerostar - about exactly the same spec as my first ever bike

My son's '86 Predator Aerostar, with my '88 Woodlands behind it. Shame he's already outgrowing it, but such is life.

Son's December 1980 dated 24" wheeled Sprint. The 24" wheel sprint didn't show up in the catalog until '82, guess they made too many 24" wheel Varsity frames in '80...

'01 Mesa GSX that I converted to more of a townie. I bought this bike new. It's the LAST of the actual Schwinns before they got sold to Pacific and the only Mesa to get a full Deore group. Since the Woodlands has arrived, I'm thinking of putting more aggressive tires back on it and altering my positioning on it. Will still keep it rigid though, as good suspension is way more expensive than the bike is worth, although I did not discard the original Manitou Magnum fork. Maybe I'll look into a rebuild kit instead...

There's a Continental I saw on Marketplace that I want pretty badly but I really can't... I'm out of space, would need to sell something else.
Last edited by Bluetrane2028; 09-26-23 at 09:33 AM.
#2
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 8,997
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 131 Post(s)
Tagged: 0 Thread(s)
Quoted: 1485 Post(s)
Liked 1,160 Times
in
785 Posts
That is quite the variety of Schwinns!
I've wanted to build a Varsity like that with a two-speed hub, for my hilly terrain. I think I'll go with green, maybe start with the Collegiate frame I have in the 24" size.
I've wanted to build a Varsity like that with a two-speed hub, for my hilly terrain. I think I'll go with green, maybe start with the Collegiate frame I have in the 24" size.
#3
Full Member
Thread Starter
That sounds like a great build.
I would like to try my Varsity as "stock", considering that it's always been a single since I had it. I think that's why I want a Continental so much. It's the nicest of the Varsity type framed bikes.
And I think I convinced myself to go back to the stock fork on my Mesa. I'll run some Chromoly BMX cruiser bars on it instead of the tall uncut steerer. The frame is a touch too small for me and that will solve my issues in a different way. But, I've had it this long, I probably put more miles on it than any of my other bikes, and worst case my son can hop on it when he's a bit older. Not about to let it go.
I would like to try my Varsity as "stock", considering that it's always been a single since I had it. I think that's why I want a Continental so much. It's the nicest of the Varsity type framed bikes.
And I think I convinced myself to go back to the stock fork on my Mesa. I'll run some Chromoly BMX cruiser bars on it instead of the tall uncut steerer. The frame is a touch too small for me and that will solve my issues in a different way. But, I've had it this long, I probably put more miles on it than any of my other bikes, and worst case my son can hop on it when he's a bit older. Not about to let it go.
#4
Freewheel Medic
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,749
Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 1371 Post(s)
Liked 1,912 Times
in
854 Posts
Quite the nice collection of Schwinn bikes!
Mine are all road models with the exception of one lone late '80s High Sierra. It can be embarrassing to list them all, here in chronological order:
'39 New World, '63 Continental, '71 Paramount P13 & Super Sport, '72 Ladies Super Sport, '75 Sports Tourer & Voyageur II, '83 Paramount, '89 974.
I've also owned in the past; a '60s Super Sport, Collegiate, and a '70s Varsity and another Super Sport.
I'll only bore you with one picture. The '75 Voyageur II with the faux Gator leather treatment. It's running a '50s Sturmey Archer AM rear 3-speed hub.

The "Gatorcet" saddle turned out to be a real booty hatchet, so I went back to a Brooks Pro.
Mine are all road models with the exception of one lone late '80s High Sierra. It can be embarrassing to list them all, here in chronological order:
'39 New World, '63 Continental, '71 Paramount P13 & Super Sport, '72 Ladies Super Sport, '75 Sports Tourer & Voyageur II, '83 Paramount, '89 974.
I've also owned in the past; a '60s Super Sport, Collegiate, and a '70s Varsity and another Super Sport.
I'll only bore you with one picture. The '75 Voyageur II with the faux Gator leather treatment. It's running a '50s Sturmey Archer AM rear 3-speed hub.

The "Gatorcet" saddle turned out to be a real booty hatchet, so I went back to a Brooks Pro.
__________________
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
Likes For pastorbobnlnh:
#5
minimalist cyclist
Join Date: Mar 2014
Location: North Carolina
Posts: 1,702
Bikes: yes please
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1083 Post(s)
Liked 1,491 Times
in
878 Posts
So after becoming empty nesters and getting back into cycling in 2014, I went with a Pacific Schwinn hybrid from a big box store (Target). I knew this was not a real Schwinn but it still looked like what I needed at the time, and wasn't a bad looking bike

I put a lot of miles on it, but it didn't take long after joining Bike Forums that I realized I was not too old or stiff to get back on a road bike, so I got my Fuji Supreme back out and cleaned it up. Joining a friendly local bike club led to wanting more road bikes and especially more steel bikes with horizontal top tubes thanks to the C&V community here. I was lucky enough to come accross a '75 Continental in great shape, and I wanted to keep it as it came off the showroom floor other than the seat. It wasn't Campus Green but the copper colored Chestnut was my 2nd favorite historic Schwinn color.

My other Schwinn is an '89 Le Tour that came with some upgrages from earlier models like the True Temper Chromoly frame

Last edited by Deal4Fuji; 09-26-23 at 07:33 AM.
Likes For Deal4Fuji:
#6
Death fork? Naaaah!!
Klein-patent 564

594 next in the queue for refinishing

'74 Superior moved on to a rider who fit it.

'89 Tempo looking for a good home

'73 Super Sport, tweaked a bit.

There's also a '65 Super Sport out in the barn I don't have images of on this device.
Top

594 next in the queue for refinishing

'74 Superior moved on to a rider who fit it.

'89 Tempo looking for a good home

'73 Super Sport, tweaked a bit.

There's also a '65 Super Sport out in the barn I don't have images of on this device.
Top
__________________
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
Likes For top506:
#7
Senior Member
Join Date: May 2013
Location: Greenwood SC USA
Posts: 2,338
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1973 Raleigh Competition, 1971 Gitane Tour de France and others
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 821 Post(s)
Liked 1,380 Times
in
688 Posts
My last Schwinn project was this '89 LeTour acquired for $15 from FB Marketplace and eventually sent on for $60. Before -

- and after -

I will note that I may acquire a '92 World Sport in the next few daysfor $45 or so because ... well, just because.

- and after -

I will note that I may acquire a '92 World Sport in the next few daysfor $45 or so because ... well, just because.
Likes For rustystrings61:
#8
Senior Member
Join Date: Nov 2005
Location: NW Ohio
Posts: 3,348
Bikes: 1984 Miyata 310, 1986 Schwinn Sierra, 2011 Jamis Quest, 1980 Peugeot TH8 Tandem, 1992 Performance Parabola, 1987 Ross Mt. Hood, 1988 Schwinn LeTour, 1988 Trek 400T, 1981 Fuji S12-S LTD, 197? FW Evans
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 491 Post(s)
Liked 817 Times
in
444 Posts
I found this '88 Le Tour at a local flea market a few years ago.

1988 Schwinn Le Tour
I bought this Sierra in 1986, after reading a review in Bicycling magazine.

1986 Schwinn Sierra
Out in the barn, I also have a 24 inch girls Caliente and his and hers Collegiates.

1988 Schwinn Le Tour
I bought this Sierra in 1986, after reading a review in Bicycling magazine.

1986 Schwinn Sierra
Out in the barn, I also have a 24 inch girls Caliente and his and hers Collegiates.
Likes For Pompiere:
#9
On the road
Join Date: Aug 2005
Location: New England
Posts: 2,091
Bikes: Old Schwinns and old Raleighs
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 340 Post(s)
Liked 701 Times
in
266 Posts
I've owned many old Schwinn bike, and still have about a half-dozen, dating from the 1930s to the 1960s.
There is no shame liking welded frame Schwinn bikes. Price and ride quality are only imperfectly related. Some of the best riding bikes I've owner are welded Schwinns. One of the worst riding was a higher-end 1970s fillet brazed Schwinn. I've also owned some wonderful 1940s era fillet brazed Schwinns from differing price ranges. Of the Schwinn bikes I've kept of those many bikes, all but one are welded or at least partially welded frames.
Here's a sampling of a few.
1959 Traveler (still have it, great rider):

1964 Traveler (still have it, another good rider):

1947 New World (still have it, skip tooth gears):

1941 New World (sold it to another collector):

1950 Superior (still have it, fun bike):

1947 Continental (sold):

1954 Traveler (sold, cool color)

1942 New World (sold to a WWII collector)
There is no shame liking welded frame Schwinn bikes. Price and ride quality are only imperfectly related. Some of the best riding bikes I've owner are welded Schwinns. One of the worst riding was a higher-end 1970s fillet brazed Schwinn. I've also owned some wonderful 1940s era fillet brazed Schwinns from differing price ranges. Of the Schwinn bikes I've kept of those many bikes, all but one are welded or at least partially welded frames.
Here's a sampling of a few.
1959 Traveler (still have it, great rider):
1964 Traveler (still have it, another good rider):

1947 New World (still have it, skip tooth gears):

1941 New World (sold it to another collector):

1950 Superior (still have it, fun bike):

1947 Continental (sold):

1954 Traveler (sold, cool color)

1942 New World (sold to a WWII collector)
__________________
Classic American and British Roadsters, Utility Bikes, and Sporting Bikes (1935-1979):
https://bikeshedva.blogspot.com/
Classic American and British Roadsters, Utility Bikes, and Sporting Bikes (1935-1979):
https://bikeshedva.blogspot.com/
Last edited by SirMike1983; 09-26-23 at 08:49 AM.
Likes For SirMike1983:
#10
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,633
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1343 Post(s)
Liked 1,175 Times
in
762 Posts
My first bicycle was an early 1950s Schwinn American with paperboy handlebars, 26x1-3/4" tires, and a 2-speed Bendix coaster brake hub, with a gearshift that resembled a handbrake lever.
The newest bicycle in my fleet, at 35 years old, is my 1988 Schwinn Project KOM-10, which is my main transportation ride, also great for patriotic holiday parades.

The newest bicycle in my fleet, at 35 years old, is my 1988 Schwinn Project KOM-10, which is my main transportation ride, also great for patriotic holiday parades.


__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
Likes For John E:
#11
Full Member
Thread Starter
Man... I think I need a 1944 or older one now too. In nearby Reading, Pennsylvania every year is a World War II re-enactment. I'd definitely consider bringing one out to that.
Likes For Bluetrane2028:
#12
Full Member
Thread Starter
I am keeping an eye out for one of these to show up locally. It's the polar opposite to my '88 Woodlands, being the halo model for the mountain bikes that year and my bike is the cheapie.
Likes For Bluetrane2028:
#13
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,633
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1343 Post(s)
Liked 1,175 Times
in
762 Posts
I hope you can find a KOM Project, either the red-white-and-blue KOM10 complete bike like mine or the monochromatic KOM20 frameset. I have heard that total production in Greenville MS in 1988 and 1989 was only about 2000 units. (I suspect the 1986-87 Paramountain is very similar, with Tange Prestige II tubing, etc.) I bought mine around 1996 from a San Diego firefighter, who told me Schwinn had replaced the frame under warranty after the first one broke. (He is a big guy, very strong and athletic. Wimpy little I have broken two road bike frames, a 1971 Nishiki Competition and a 1973 Peugeot UO-8.) My fork is probably from a very early production run, hence the RollerCam up front instead of the more conventional cantilever brakes I have seen on every other KOM10.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#14
On the road
Join Date: Aug 2005
Location: New England
Posts: 2,091
Bikes: Old Schwinns and old Raleighs
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 340 Post(s)
Liked 701 Times
in
266 Posts
The issue with the pre-war and war era ones is they take some parts that are difficult to find (the special wire fender braces, certain bottom bracket parts, glass reflectors, etc.). If you go pre-war or war era, it's best to buy a complete bike, unless you're willing to chase harder to find parts (or use later parts as stand-ins). Post-war Schwinn parts are generally much more plentiful.
__________________
Classic American and British Roadsters, Utility Bikes, and Sporting Bikes (1935-1979):
https://bikeshedva.blogspot.com/
Classic American and British Roadsters, Utility Bikes, and Sporting Bikes (1935-1979):
https://bikeshedva.blogspot.com/
Last edited by SirMike1983; 09-26-23 at 10:42 AM.
#15
Live not by lies.
Join Date: Nov 2020
Posts: 1,306
Bikes: BigBox bikes.
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 857 Post(s)
Liked 779 Times
in
581 Posts
I've owned many old Schwinn bike, and still have about a half-dozen, dating from the 1930s to the 1960s.
There is no shame liking welded frame Schwinn bikes. Price and ride quality are only imperfectly related. Some of the best riding bikes I've owner are welded Schwinns. One of the worst riding was a higher-end 1970s fillet brazed Schwinn. I've also owned some wonderful 1940s era fillet brazed Schwinns from differing price ranges. Of the Schwinn bikes I've kept of those many bikes, all but one are welded or at least partially welded frames.
Here's a sampling of a few.
1959 Traveler (still have it, great rider):

1964 Traveler (still have it, another good rider):

1947 New World (still have it, skip tooth gears):

1941 New World (sold it to another collector):

1950 Superior (still have it, fun bike):

1947 Continental (sold):

1954 Traveler (sold, cool color)

1942 New World (sold to a WWII collector)

There is no shame liking welded frame Schwinn bikes. Price and ride quality are only imperfectly related. Some of the best riding bikes I've owner are welded Schwinns. One of the worst riding was a higher-end 1970s fillet brazed Schwinn. I've also owned some wonderful 1940s era fillet brazed Schwinns from differing price ranges. Of the Schwinn bikes I've kept of those many bikes, all but one are welded or at least partially welded frames.
Here's a sampling of a few.
1959 Traveler (still have it, great rider):
1964 Traveler (still have it, another good rider):

1947 New World (still have it, skip tooth gears):

1941 New World (sold it to another collector):

1950 Superior (still have it, fun bike):

1947 Continental (sold):

1954 Traveler (sold, cool color)

1942 New World (sold to a WWII collector)
Likes For SkinGriz:
#16
Senior Member
Join Date: Dec 2016
Location: Long Island, NY
Posts: 2,020
Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 768 Post(s)
Liked 916 Times
in
610 Posts
Since you asked....
Like so many of my generation I stated out liking Schwinn. I had a 24" wheel Typhoon to get around when I was a pre-teen. Then the bike boom and everyone wanted European bikes including, maybe even especially me. I ended up working in a Schwinn dealership in my early 20's and sold as many non-Schwinns as Schwinns. BMX was hot at the time and Mountain Biking was just beginning on the east coast.
Between my more mature perspective on bicycles, my experience working at a Schwinn dealer and the sometimes under-appreciation (affordability) of some of these Schwinn bike, I have a collection. All have been made in the US.

This Heavy Duti was built when I was working at the Schwinn dealership and had access to Schwinn's catalog's. The decals were available from Schwinn at the time. The fork is a King Sting and the rear rack is from Schwinn. It also has Schwinn Westwind tires that are cracking.

1972 Super Sport

1980 Continental. This was repainted in the color of my choice. Campus Green.

LeTour Luxe. The Lux had shift levers on the stem instead of the down tube, so it had braze-ons for the shift cables on the down tube. Bonus for me since I wanted bar-end shifters.

This may sound a bit incredible , however, I had a Serotta Club special back in the early '80's. It was a great bike built by a great framebuilder. This Traveler feels a lot like the Serotta Club Special. They do share double butted tubing, with the Serotta having an Italian tubeset with a dove decal and the Schwinn having True Temper. I had/have regrets selling the Serotta, but for the ride and feel this Traveler is a good substitute, it is just lacking the panashe that a vintage Serotta has.
I have a Varsity and an American waiting to be built but I would need a bigger garage or get rid of some bikes for that to happen.
Between my more mature perspective on bicycles, my experience working at a Schwinn dealer and the sometimes under-appreciation (affordability) of some of these Schwinn bike, I have a collection. All have been made in the US.

This Heavy Duti was built when I was working at the Schwinn dealership and had access to Schwinn's catalog's. The decals were available from Schwinn at the time. The fork is a King Sting and the rear rack is from Schwinn. It also has Schwinn Westwind tires that are cracking.

1972 Super Sport

1980 Continental. This was repainted in the color of my choice. Campus Green.

LeTour Luxe. The Lux had shift levers on the stem instead of the down tube, so it had braze-ons for the shift cables on the down tube. Bonus for me since I wanted bar-end shifters.

This may sound a bit incredible , however, I had a Serotta Club special back in the early '80's. It was a great bike built by a great framebuilder. This Traveler feels a lot like the Serotta Club Special. They do share double butted tubing, with the Serotta having an Italian tubeset with a dove decal and the Schwinn having True Temper. I had/have regrets selling the Serotta, but for the ride and feel this Traveler is a good substitute, it is just lacking the panashe that a vintage Serotta has.
I have a Varsity and an American waiting to be built but I would need a bigger garage or get rid of some bikes for that to happen.
#17
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,547
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 83 Post(s)
Tagged: 0 Thread(s)
Quoted: 2555 Post(s)
Liked 1,578 Times
in
871 Posts
That SS is Super cool.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Likes For The Golden Boy:
#18
Senior Member
Join Date: Mar 2021
Location: Beaverton, OR
Posts: 1,364
Bikes: You had me at rusty and Italian!!
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 534 Post(s)
Liked 927 Times
in
492 Posts
I recently brought home the 1964 (I think) Traveler. I haven’t ridden it yet, still freshening it up but it’s my 5th(?) Schwinn. Accidental fan…

Various others have included ‘72 Super Sport, Circuit and some I can’t remember…

Various others have included ‘72 Super Sport, Circuit and some I can’t remember…
Likes For RustyJames:
Likes For Otter2:
#20
Car free since 2018
Join Date: Aug 2017
Location: Vancouver, BC
Posts: 665
Bikes: Mostly japanese ones
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 244 Post(s)
Liked 261 Times
in
128 Posts
1986 Voyageur I picked up a couple of weeks ago. Close to half the stainless steel spokes on the rear are rusted badly. After I sort that out I plan to change the handlebars to wider ones, the stem to a taller one, seatpost for a longer one, maybe bar end shifters and a different saddle. 1986 but I can't quite understand why the rear is 122mm.

#23
Senior Member
Join Date: Aug 2017
Location: Minneapolis
Posts: 910
Bikes: 1968 Raleigh Super Course. 1972 Raleigh Professional, 1975 Raleigh International, 1978 Raleigh Professional, 1985 Raleigh Prestige, 1972 Schwinn Paramount, 1980 Schwinn Voyageur 11.8, 1960 Carlton Franco Suisse Peugeot PX10, 1972 Motobecane Le Champ
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 311 Post(s)
Liked 645 Times
in
335 Posts
I’ve just got this chrome Paramount P-13 from 1972 and it’s my only remaining Schwinn. It’s a forever bike for me though. Previously I owned a 1980 chrome Voyageur 11.8 (which I really loved) and a 1978 Varsity in the chestnut color (which I really didn’t).

#24
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,744
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 756 Post(s)
Liked 610 Times
in
333 Posts
Y’all are facilitating my addiction…
(JK… my wife facilitates my collection. She’s prettier than me, too.)
My first bike was a Sting-Ray, bought at the local Schwinn shop. That led to a 3-speed Collegiate, a 5-speed Collegiate, a Le Tour III… then I went to work at that same Schwinn shop. That led to a fillet-brazed Superior and a career in the bicycle business. (I eventually got out and got a real job.)
Two careers later, I now have:
A 5-speed Suburban awaiting restoration.
https://www.flickr.com/photos/ohpv/albums/72177720297311905
A 3-speed Super Sport townie.
https://www.flickr.com/photos/ohpv/albums/72157670249022375
An all-XTR Superior restomod.
https://www.flickr.com/photos/ohpv/albums/72157642470085394
And a bunch of non-Schwinns…
(JK… my wife facilitates my collection. She’s prettier than me, too.)
My first bike was a Sting-Ray, bought at the local Schwinn shop. That led to a 3-speed Collegiate, a 5-speed Collegiate, a Le Tour III… then I went to work at that same Schwinn shop. That led to a fillet-brazed Superior and a career in the bicycle business. (I eventually got out and got a real job.)
Two careers later, I now have:
A 5-speed Suburban awaiting restoration.
https://www.flickr.com/photos/ohpv/albums/72177720297311905
A 3-speed Super Sport townie.
https://www.flickr.com/photos/ohpv/albums/72157670249022375
An all-XTR Superior restomod.
https://www.flickr.com/photos/ohpv/albums/72157642470085394
And a bunch of non-Schwinns…
Last edited by Jeff Wills; 09-26-23 at 10:01 PM.
#25
Senior Member
Join Date: Jun 2017
Location: Earlville, IL
Posts: 661
Bikes: Some Schwinns, Raleighs, Centurions, Crescent, Bianchi
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 248 Post(s)
Liked 278 Times
in
118 Posts
All my Schwinns

My first Schwinn, a 1978 Superior that I bought new in 1979, and still have it.

I also still have this 1980 Super Letour that my grandfather won in a raffle. He was too old to ride so he gave it to me. Completely original including tires and bar tape.

My 76 Super LeTour 12.2 that I've owned for at least 25 years. One of my favorite bikes.

My 78 chrome Super LeTour 12.2. Built up with Shimano Arabesque components.

This 80 chrome Voyageur 11.8 was bought from the original owner who said he rode it less than 50 miles, then put it in the basement and never rode it again. The large chain ring and three of the cogs on the cassette had never been used. The bike is now part of @jjhabbs collection.

Another favorite, a 77 Volare.

I inherited this 67 Varsity Touring from my uncle. Near mint condition. I thought it deserved to be part of @jjhabbs collection, so that's where it is now.

This 88 Tempo started with just a frame, but I built it up with Dura Ace and Campagnolo components. Another favorite.

This 72 Super Sport is still a work in progress. I've decided to let this go a couple times now, but then I take it for another ride and change my mind. It's such a pleasure to ride.
Last edited by 76SLT; 09-26-23 at 10:15 PM.