Factory Replacement (?) Cannondale CAAD3
#1
Dog Dad
Thread Starter
Factory Replacement (?) Cannondale CAAD3
I have a bit of a mystery bike. It is a Cannondale CAAD3 with no model name written on the side but stamped 98 on the bottom.



It appears to be a mix between the 1997 R800 (CAAD 3)

1997 R800 (CAAD3)
And the 1998 R300 (CAAD2) paint scheme

1998 R300 (CAAD2)
Is it possible that this is a replacement frame and Cannondale no longer had the yellow paint from 1997 model line for the Viper Red fade to Speed Yellow (YVR) and chose to paint the frame with the 1998 model line Blaze Red Fade (BLZ)?



It appears to be a mix between the 1997 R800 (CAAD 3)

1997 R800 (CAAD3)
And the 1998 R300 (CAAD2) paint scheme

1998 R300 (CAAD2)
Is it possible that this is a replacement frame and Cannondale no longer had the yellow paint from 1997 model line for the Viper Red fade to Speed Yellow (YVR) and chose to paint the frame with the 1998 model line Blaze Red Fade (BLZ)?
#2
Senior Member
Join Date: Mar 2007
Location: SF Bay Area, East bay
Posts: 7,533
Bikes: Marinoni, Kestral 200 2002 Trek 5200, KHS Flite, Koga Miyata, Schwinn Spitfire 5, Schwinn Speedster, Mondia Special, Univega Alpina, Miyata team Ti, MB3
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 1203 Post(s)
Liked 1,159 Times
in
657 Posts
I'd go with the group to determine model. You can ask here...
https://www.bikeforums.net/classic-v...annondale.html
https://www.bikeforums.net/classic-v...annondale.html
Likes For curbtender:
#3
Dog Dad
Thread Starter
I'd go with the group to determine model. You can ask here...
https://www.bikeforums.net/classic-v...annondale.html
https://www.bikeforums.net/classic-v...annondale.html
#4
Junior Member
I have a similar ~99 Cannondale (an MTB Super V), in that it has no model number on it despite being the original factory paintjob, the reason being.... it was purchased as a frameset from the dealer and built to customer spec.
I know this as the guy I bought it off was the shop owner (A 'Dale dealer) who sold it to the original owner, who then PX'd it back to the shop several years later, he told me that often frames were available to dealers this way but not advertised in the catalogues, whether they were supposed to be sold like this or whether they were pulled from spare warranty replacement stock I couldn't say.
So could yours be similar, a frameset that was purchased and built up rather than an off the peg?
I know this as the guy I bought it off was the shop owner (A 'Dale dealer) who sold it to the original owner, who then PX'd it back to the shop several years later, he told me that often frames were available to dealers this way but not advertised in the catalogues, whether they were supposed to be sold like this or whether they were pulled from spare warranty replacement stock I couldn't say.
So could yours be similar, a frameset that was purchased and built up rather than an off the peg?