My Uncle's Restored 1972 Raleigh Professional
#1
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
My Uncle's Restored 1972 Raleigh Professional
Hello folks,
A couple years ago I acquired my uncle's 1972 Raleigh Professional, which he rode for well over a decade and left with virtually no original parts - even the fork was a replacement from a Raleigh International since he was involved in a front end collision sometime in the distant past. Last year after rebuilding it and riding it for a while I gave it back to him and he expressed the desire to restore it to the original specification, so I did all of the legwork and purchased all of the parts necessary, including an entire replacement frame to get the right fork. Said replacement frame had Hayden lugs and he fancied them, so he ended up building a completely new bicycle and gave me back the old one!
As a note, my uncle runs a hot rod shop (doublezhotrods.com) and his skill as a painter is evident in the work, and the fresh chrome scheme was inspired by Carlton team racing bicycles from the era, with the fully-chromed fastback stays and head lugs as an example. However, he was a bit hasty and there are imperfections throughout as well as some peeling around the clamp-on parts because he did not let the paint set completely. I purchased all of the correct decals but there were some extras that went along with the sets, and he did not consult me for final decal placement or choice before applying them and a clear coat... So some of the decals are misplaced. I blame his anxiousness to see the project through and the rather carefree attitude he had towards the project compared to his professional work for these oversights!
I'm used to being critical of my own work and just took my uncle's effort in stride above, but I really think the end results are stunning and I was eager to share it here. He pumped up the sprint tires to 140psi and let me take off down a couple horrible country roads on it so I felt like my teeth were going to clatter out of my head, but I plan to take it out for a long ride with him sometime in the coming weeks and really get a feel for it! He rides a new carbon Eddy Merckx with Record 11 and thinks this is too slow to keep up with the crowd of retired guys he regularly rides with, but I think I've got him hooked on the idea of Eroica California in April and this with some wider tubs should do the trick...
Cheers!
-Gregory
A couple years ago I acquired my uncle's 1972 Raleigh Professional, which he rode for well over a decade and left with virtually no original parts - even the fork was a replacement from a Raleigh International since he was involved in a front end collision sometime in the distant past. Last year after rebuilding it and riding it for a while I gave it back to him and he expressed the desire to restore it to the original specification, so I did all of the legwork and purchased all of the parts necessary, including an entire replacement frame to get the right fork. Said replacement frame had Hayden lugs and he fancied them, so he ended up building a completely new bicycle and gave me back the old one!
As a note, my uncle runs a hot rod shop (doublezhotrods.com) and his skill as a painter is evident in the work, and the fresh chrome scheme was inspired by Carlton team racing bicycles from the era, with the fully-chromed fastback stays and head lugs as an example. However, he was a bit hasty and there are imperfections throughout as well as some peeling around the clamp-on parts because he did not let the paint set completely. I purchased all of the correct decals but there were some extras that went along with the sets, and he did not consult me for final decal placement or choice before applying them and a clear coat... So some of the decals are misplaced. I blame his anxiousness to see the project through and the rather carefree attitude he had towards the project compared to his professional work for these oversights!
I'm used to being critical of my own work and just took my uncle's effort in stride above, but I really think the end results are stunning and I was eager to share it here. He pumped up the sprint tires to 140psi and let me take off down a couple horrible country roads on it so I felt like my teeth were going to clatter out of my head, but I plan to take it out for a long ride with him sometime in the coming weeks and really get a feel for it! He rides a new carbon Eddy Merckx with Record 11 and thinks this is too slow to keep up with the crowd of retired guys he regularly rides with, but I think I've got him hooked on the idea of Eroica California in April and this with some wider tubs should do the trick...
Cheers!
-Gregory
Last edited by Kilroy1988; 11-29-21 at 08:35 PM.
Likes For Kilroy1988:
#2
South Carolina Ed
Join Date: Mar 2007
Location: Greer, SC
Posts: 3,889
Bikes: Holdsworth custom, Macario Pro, Ciocc San Cristobal, Viner Nemo, Cyfac Le Mythique, Giant TCR, Tommasso Mondial, Cyfac Etoile
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 344 Post(s)
Liked 291 Times
in
138 Posts
Maybe it rides as if it were finished perfectly
Likes For sced:
#3
Senior Member
Join Date: Dec 2015
Location: Menomonee Falls, WI
Posts: 1,833
Bikes: 1984 Schwinn Supersport, 1988 Trek 400T, 1977 Trek TX900, 1982 Bianchi Champione del Mondo, 1978 Raleigh Supercourse, 1986 Trek 400 Elance, 1991 Waterford PDG OS Paramount, 1971 Schwinn Sports Tourer, 1985 Trek 670
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 604 Post(s)
Liked 1,063 Times
in
535 Posts
Awfully attractive bike, I see nothing to make excuses for, great story, would be proud to own that bike! My size too, in case you can’t stand those extremely minor imperfections.
Tim
Tim
Likes For tkamd73:
#4
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,476
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1829 Post(s)
Liked 3,375 Times
in
1,580 Posts
It looks great!
I do like the extra chrome, and it avoids the issue of whether someone might mistake it for original paint, as well as the arguments about whether the paint is too thick to be a simulation of original.
Steve in Peoria
I do like the extra chrome, and it avoids the issue of whether someone might mistake it for original paint, as well as the arguments about whether the paint is too thick to be a simulation of original.
Steve in Peoria
Likes For steelbikeguy:
#5
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,984
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26418 Post(s)
Liked 10,380 Times
in
7,208 Posts
.
...I painted one of those once, and I had to look at a bunch of them, online, to figure out that the seat tube striping needs to start high enough so that the front derailleur clamp doesn't sit on the lowest stripe. I have now forgotten the formula, but it something about measuring starting above the largest chainring, rather than centering everything on the entire length of the seat tube.
But I often do less than completely original paint and decal schemes. Sometime you just have to listen to your muse.
...I painted one of those once, and I had to look at a bunch of them, online, to figure out that the seat tube striping needs to start high enough so that the front derailleur clamp doesn't sit on the lowest stripe. I have now forgotten the formula, but it something about measuring starting above the largest chainring, rather than centering everything on the entire length of the seat tube.
But I often do less than completely original paint and decal schemes. Sometime you just have to listen to your muse.
__________________
Likes For 3alarmer:
#6
Classic, Vintage Mechanic
Join Date: Feb 2017
Location: Vancouver B.C. Canada
Posts: 117
Bikes: '65 Legnano Gran Primeo || '76 Holdsworth Mistral || '82 Specialized Stumpjumper
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Liked 40 Times
in
25 Posts
Looks nicer than original IMHO, and beautifully photographed too. "Mink Blue" and silver, one of my favorite combinations and as iconic a colour as Bianchi's Celest, Legnanos metalic pistaschio-green, or Crescent's orange.
Likes For d_dutchison:
#7
Senior Member
Join Date: Jun 2005
Location: In transit
Posts: 1,897
Bikes: 07 Vanilla, 98 IRD road frame built up with 25th Ann DA, Surly cross check with 105 comp, 78 Raleigh Comp GS, 85 Centurionelli
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 87 Post(s)
Liked 923 Times
in
191 Posts
It's a lovely build. I think the full chrome stays look the heat, and agree with the comments that the slightly off-original look make it all the better. Well done!
Likes For poprad:
#9
Senior Member
Smashing job! Is it perhaps a wee bit darker/more teal than original? Beautiful color either way.
My only tiny nit is I am so used to seeing 3 top tube cable clamps, I feel like that’s the right number.
My only tiny nit is I am so used to seeing 3 top tube cable clamps, I feel like that’s the right number.
Likes For due ruote:
#10
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,796
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1392 Post(s)
Liked 1,324 Times
in
836 Posts
"...and Bob's your uncle." It is indeed satisfying to complete an ambitious project so successfully.
(I can actually use that British phrase with my sons, because my brother's name is Robert. )
(I can actually use that British phrase with my sons, because my brother's name is Robert. )
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
Likes For John E:
#11
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,653
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 1025 Post(s)
Liked 2,525 Times
in
1,055 Posts
OMG, what an abomination. As a public service, I can drive down from the Bay Area this weekend to relieve you and your uncle of that POS eyesore and dispose of it properly.
Didn't work, huh? Yeah, I didn't think it would. Very nice. It's never a bad thing when an old war horse gets a new life. The extra chrome should make it blinding (in a good way) in the Central Valley sun. I hope it gets out on the road and is ridden a bunch, the way it was meant to be.
Didn't work, huh? Yeah, I didn't think it would. Very nice. It's never a bad thing when an old war horse gets a new life. The extra chrome should make it blinding (in a good way) in the Central Valley sun. I hope it gets out on the road and is ridden a bunch, the way it was meant to be.
__________________
"I'm in shape -- round is a shape." Andy Rooney
"I'm in shape -- round is a shape." Andy Rooney
Likes For bikingshearer:
#12
(rhymes with spook)
Join Date: Aug 2009
Location: Winslow, AR
Posts: 2,788
Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 919 Post(s)
Liked 745 Times
in
546 Posts
OMG, what an abomination. As a public service, I can drive down from the Bay Area this weekend to relieve you and your uncle of that POS eyesore and dispose of it properly.
Didn't work, huh? Yeah, I didn't think it would. Very nice. It's never a bad thing when an old war horse gets a new life. The extra chrome should make it blinding (in a good way) in the Central Valley sun. I hope it gets out on the road and is ridden a bunch, the way it was meant to be.
Didn't work, huh? Yeah, I didn't think it would. Very nice. It's never a bad thing when an old war horse gets a new life. The extra chrome should make it blinding (in a good way) in the Central Valley sun. I hope it gets out on the road and is ridden a bunch, the way it was meant to be.
Likes For thook:
#13
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,653
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 1025 Post(s)
Liked 2,525 Times
in
1,055 Posts
#14
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,476
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1829 Post(s)
Liked 3,375 Times
in
1,580 Posts
I don't "need" a Raleigh Pro, but if I stumbled across one in the 24 1/2" size, I'd sure start thinking about finding a spot for it in the limited space available.
Steve in Peoria
(seduced by blue mink & silver as a teen)
#15
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
-Gregory
Last edited by Kilroy1988; 12-01-21 at 06:12 PM.
#16
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,476
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1829 Post(s)
Liked 3,375 Times
in
1,580 Posts
I've got another bike that has a BB close to 11". Not a problem while riding, but stopping at intersections is a bit tippy if I want to stay in the saddle.
Steve in Peoria
#17
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
-Gregory
#18
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
This is my uncle's original '72 Raleigh Pro, by the way. I posted about after I dug it out of his storage unit and fixed it up to ride a couple years ago. When I knew he was giving it back to me since he decided to use the replacement frame with the Hayden bird lugs, I went hunting for another replacement fork and found it just a couple weeks ago. I reassembled the bike the other day and got it back on the road. With the 25mm Continental Gatorskins pumped up to 90psi and all the Suntour/Sugino components he and I upgraded it with, plus the neat Universal Mod. 61 centerpulls and GB spearpoint stem and bars, I honestly find it to be just as joyful to ride as the freshly restored one... It has the appearance of a real workhorse!
-Gregory
-Gregory
Likes For Kilroy1988:
#19
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,476
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1829 Post(s)
Liked 3,375 Times
in
1,580 Posts
My Hetchins is my big bike, and it has a BB height of about 11 inches. The seat tube is 25" c-t, and the standover height is 34 3/4", which is about as big as I want to go.
Nice to know that a Pro would be a better fit.
I'm still not sure why your head tube seems (to me) to be bigger than the one on my Hetchins, though.
Something to do with the colors, maybe??
Steve in Peoria
Likes For steelbikeguy:
#20
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
I've seen your Hetchins posted before and figured the size was right about 25", and it seems like it'd be just about as tall as I'd like as well! I've been aiming at riding 23-24 1/2" frames depending on the era and typical contemporary seat post exposure.
I have a feeling the chrome lugs, which blend in with the silver head tube, give that impression about the Raleigh Pro. Comparing the photo with the one I just posted above of my uncle's old 24 1/2" frame, the new one does appear larger though I can assure you it's not! Cheers!
-Gregory
Likes For Kilroy1988:
#21
Full Member
Two are lighter!!! Actually I agree but my recently refurbished '79 Trek came to me with two. When I put it back together I used three but there are marks where the originals were. (did not re-paint) So I'm removing one and putting the two back in the original positions.
#22
Senior Member
Join Date: Nov 2013
Location: Near Pottstown, PA: 30 miles NW of Philadelphia
Posts: 2,186
Bikes: 2 Trek Mtn, Cannondale R600 road, 6 vintage road bikes
Mentioned: 83 Post(s)
Tagged: 0 Thread(s)
Quoted: 472 Post(s)
Liked 1,028 Times
in
404 Posts
OP, despite the deviations from stock paint and parts I like what your uncle did. I've taken some liberties with mine too, probably the sort that an original owner would have taken in the late 70s.
I cannon help but ride it alot
Likes For Prowler:
#23
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,638
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4681 Post(s)
Liked 5,799 Times
in
2,284 Posts
Hey Steve,
I've seen your Hetchins posted before and figured the size was right about 25", and it seems like it'd be just about as tall as I'd like as well! I've been aiming at riding 23-24 1/2" frames depending on the era and typical contemporary seat post exposure.
I have a feeling the chrome lugs, which blend in with the silver head tube, give that impression about the Raleigh Pro. Comparing the photo with the one I just posted above of my uncle's old 24 1/2" frame, the new one does appear larger though I can assure you it's not! Cheers!
-Gregory
I've seen your Hetchins posted before and figured the size was right about 25", and it seems like it'd be just about as tall as I'd like as well! I've been aiming at riding 23-24 1/2" frames depending on the era and typical contemporary seat post exposure.
I have a feeling the chrome lugs, which blend in with the silver head tube, give that impression about the Raleigh Pro. Comparing the photo with the one I just posted above of my uncle's old 24 1/2" frame, the new one does appear larger though I can assure you it's not! Cheers!
-Gregory
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#24
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
I think he said he got charged about $200 to have the full frame and fork rechromed.
-Gregory
Last edited by Kilroy1988; 12-03-21 at 07:57 PM.
#25
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,984
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26418 Post(s)
Liked 10,380 Times
in
7,208 Posts
.
...the one I repainted here, I did in silver and black. I always thought those looked cool, even though the blue mink ones are what you usually see. Listen to your muse.
...the one I repainted here, I did in silver and black. I always thought those looked cool, even though the blue mink ones are what you usually see. Listen to your muse.
__________________