Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Who Still Makes Lugged Steel Frames & Forks?

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Who Still Makes Lugged Steel Frames & Forks?

Old 11-28-22, 12:03 AM
  #1  
Bad Lag
Senior Member
Thread Starter
 
Join Date: Jul 2013
Location: So Cal, for now
Posts: 2,475

Bikes: 1974 Bob Jackson - Nuovo Record, Brooks Pro, Clips & Straps

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1104 Post(s)
Liked 794 Times in 452 Posts
Who Still Makes Lugged Steel Frames & Forks?

Title says it all but maybe I should add, that are top quality and don't cost a kidney.

What is the tubing set to buy; is it still 531 or has it morphed to 753 or...?

Is it more just practical to buy C&V frames? Practical - cost is low and and benefit is high.

This is just my idle curiosity but if you have links to web pages, those would be appreciated.
Bad Lag is offline  
Likes For Bad Lag:
Old 11-28-22, 03:08 AM
  #2  
P!N20
Senior Member
 
P!N20's Avatar
 
Join Date: Aug 2010
Location: Wurundjeri Country
Posts: 2,452
Mentioned: 32 Post(s)
Tagged: 0 Thread(s)
Quoted: 1073 Post(s)
Liked 1,882 Times in 924 Posts
There's a lot to unpack here.

Originally Posted by Bad Lag
Title says it all but maybe I should add, that are top quality and don't cost a kidney.
Top quality in anything usually costs a kidney. Nobody is making production lugged steel frames that I'm aware of that would keep costs down, so each lugged steel frame is essentially made to order.

If you take out the lugged part though, there are a lot more options for tig welded steel frames.

Originally Posted by Bad Lag
What is the tubing set to buy; is it still 531 or has it morphed to 753 or...?
531 and 753 aren't really available anymore, unless you happen to work for Raleigh. There are still plenty of Reynolds tube sets available: https://www.reynoldstechnology.biz/m...l/s-953-steel/

Columbus tubing is still available and Tange gets a fair bit of use, too.

Originally Posted by Bad Lag
Is it more just practical to buy C&V frames? Practical - cost is low and and benefit is high.
Probably. Depends what your desired outcome is. If you want a lugged steel frame with a modern groupset, a vintage frame may not be compatible.

A lot of the high end Italian framebuilders still offer lugged still frames, but cheap they aren't.
P!N20 is offline  
Likes For P!N20:
Old 11-28-22, 03:13 AM
  #3  
Bianchigirll 
Bianchi Goddess
 
Bianchigirll's Avatar
 
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 29,721

Bikes: Too many to list here check my signature.

Mentioned: 191 Post(s)
Tagged: 2 Thread(s)
Quoted: 2910 Post(s)
Liked 2,832 Times in 1,459 Posts
I don’t think you’re going to find a new production lugged frame especially with name brand tubing for under a grand. However the only frame I’ve personally checked on recently is the Soma Buena Vista and it’s $900 for lugless Prestige but a crowned fork.


__________________
One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"

Sugar "Kane" Kowalczyk

Last edited by Bianchigirll; 11-28-22 at 06:20 AM.
Bianchigirll is offline  
Likes For Bianchigirll:
Old 11-28-22, 04:04 AM
  #4  
pdfiddler
Newbie
 
Join Date: Apr 2006
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
Yeah but it has a funny shape!
pdfiddler is offline  
Likes For pdfiddler:
Old 11-28-22, 04:44 AM
  #5  
C9H13N 
Full Member
 
Join Date: Dec 2012
Location: North Seattle
Posts: 391

Bikes: Davidson ’81

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 120 Post(s)
Liked 229 Times in 121 Posts
https://www.merlincycles.com/merlin-...me-266810.html

something like this maybe?
C9H13N is offline  
Likes For C9H13N:
Old 11-28-22, 04:53 AM
  #6  
reissue59
Full Member
 
Join Date: Dec 2014
Posts: 332
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 67 Post(s)
Liked 158 Times in 67 Posts
Marinoni
reissue59 is offline  
Likes For reissue59:
Old 11-28-22, 06:08 AM
  #7  
Imazagi
Newbie
 
Imazagi's Avatar
 
Join Date: Oct 2022
Posts: 20
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Liked 23 Times in 12 Posts
Rivendell bikes and the Crust Romanceür come to mind.
Imazagi is offline  
Likes For Imazagi:
Old 11-28-22, 06:38 AM
  #8  
repechage
Senior Member
 
Join Date: Jun 2006
Posts: 20,323
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 3449 Post(s)
Liked 2,800 Times in 1,974 Posts
Back up and consider must haves besides basic geometry. If you need an especially short top tube, modern custom.

otherwise-
planned tire size.
brake attachment and reach.
Rear spacing.

there are other factors of course, but any of the above could be a fork in the road.
repechage is offline  
Old 11-28-22, 06:45 AM
  #9  
Hondo6
Senior Member
 
Join Date: Sep 2021
Location: SW Florida, USA
Posts: 1,295

Bikes: Yes

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 540 Post(s)
Liked 656 Times in 456 Posts
Waterford's Rando 22-Series frames appear to be lugged. But prepare to bring money.
Hondo6 is offline  
Old 11-28-22, 07:05 AM
  #10  
nlerner
Senior Member
 
Join Date: Dec 2005
Posts: 17,127
Mentioned: 480 Post(s)
Tagged: 0 Thread(s)
Quoted: 3788 Post(s)
Liked 6,574 Times in 2,580 Posts
Mercian: https://www.merciancycles.co.uk/prod...tegory/frames/
nlerner is offline  
Old 11-28-22, 08:09 AM
  #11  
RustyJames 
Senior Member
 
Join Date: Mar 2021
Location: Beaverton, OR
Posts: 1,443

Bikes: You had me at rusty and Italian!!

Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 559 Post(s)
Liked 1,032 Times in 534 Posts
C&V lugged steel frames come from an era when technology was expensive and labor was cheap. Times have changed.
RustyJames is online now  
Likes For RustyJames:
Old 11-28-22, 08:17 AM
  #12  
seypat
Senior Member
 
Join Date: Oct 2010
Posts: 8,756
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 3191 Post(s)
Liked 2,460 Times in 1,489 Posts
If there's one available in your area, you could take a framebuilding class and build your own.

Last edited by seypat; 12-01-22 at 06:56 AM.
seypat is online now  
Likes For seypat:
Old 11-28-22, 08:20 AM
  #13  
tcs
Palmer
 
tcs's Avatar
 
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,580

Bikes: Mike Melton custom, 1982 Stumpjumper, Alex Moulton AM, 2010 Dawes Briercliffe, 2017 Dahon Curl i8, 2021 Motobecane Turino 1x12

Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1645 Post(s)
Liked 1,785 Times in 1,041 Posts
Pashley Countryman and Country Clubman: Production lugged 531

https://www.britishbicycle.com/pashley-cycles/

In a more traditional vein, there's the Hero City Prince.

https://www.herocycles.com/product/prince-jr
tcs is offline  
Old 11-28-22, 08:34 AM
  #14  
Atlas Shrugged
Senior Member
 
Join Date: Mar 2010
Posts: 1,629
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1217 Post(s)
Liked 1,281 Times in 653 Posts
AliExpress has lugged steel of your choice. No kidney is required unless you choose Renoylds 853.

I am not a C&V guy but look at the fancy lug work on this one, exactly what they always talk about. Fancy Bike

Last edited by Atlas Shrugged; 11-28-22 at 10:07 AM.
Atlas Shrugged is offline  
Likes For Atlas Shrugged:
Old 11-28-22, 08:50 AM
  #15  
nlerner
Senior Member
 
Join Date: Dec 2005
Posts: 17,127
Mentioned: 480 Post(s)
Tagged: 0 Thread(s)
Quoted: 3788 Post(s)
Liked 6,574 Times in 2,580 Posts
Sometimes a current manufacturer decides to release an old-timey build. See my Lincolnshire Poacher from 10 or so years ago as an example.
nlerner is offline  
Old 11-28-22, 09:14 AM
  #16  
Spaghetti Legs 
Senior Member
 
Join Date: Dec 2014
Location: Central Virginia
Posts: 5,085

Bikes: Numerous

Mentioned: 150 Post(s)
Tagged: 0 Thread(s)
Quoted: 1672 Post(s)
Liked 3,034 Times in 904 Posts
Guess it depends on the gong price for kidneys. Tommasini and Battaglin are still doing lugged. In the Columbus steel, Spirit seems to be the latest and greatest but I seem to remember Battaglin was using SL recently.
__________________
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur

Spaghetti Legs is offline  
Old 11-28-22, 10:08 AM
  #17  
Erzulis Boat 
Le Crocodile
 
Erzulis Boat's Avatar
 
Join Date: Oct 2005
Location: Santa Barbara Calif.
Posts: 1,873
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 367 Post(s)
Liked 771 Times in 311 Posts

Colnago still makes them. That being said, anything from the 1990's with vertical rear dropouts (so you can use modern lightweight wheels) is a great choice.

Why vertical? Classic steel lugged bikes had horizontal dropouts, and the hubs of yesteryear typically had serrated steel contact surfaces because you needed it so that the wheel wouldn't "slip" forward. The system needed to be tight, so everything was beefy. Put some modern wheels in a classic horizontal dropout, and see just how quickly you can pull the wheel forward when you give it the gas.

Once bikes started getting vertical dropouts, the hubs could also change, and no longer required the brute force to stay in place. The hubs then started using lightweight components/designs. The vertical dropout is where I draw the line between classic and modern when it comes to lugged steel bikes. Not much else has changed.
Erzulis Boat is offline  
Likes For Erzulis Boat:
Old 11-28-22, 10:30 AM
  #18  
Oldairhead 
RUSA #3100
 
Oldairhead's Avatar
 
Join Date: Feb 2012
Location: Oregon City
Posts: 834

Bikes: Yes

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 234 Post(s)
Liked 486 Times in 178 Posts
Originally Posted by Bad Lag
Title says it all but maybe I should add, that are top quality and don't cost a kidney.
What does a kidney cost? Well, I believe that the going rate from a living donor in some parts of the world is around $2500 - $3000 for a kidney, so there is your yardstick. In these days of $10,000+ carbon fiber bikes getting a bike for the cost of a kidney is a deal!
__________________
https://utahrandonneur.wordpress.com
Oldairhead is online now  
Likes For Oldairhead:
Old 11-28-22, 10:31 AM
  #19  
Erzulis Boat 
Le Crocodile
 
Erzulis Boat's Avatar
 
Join Date: Oct 2005
Location: Santa Barbara Calif.
Posts: 1,873
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 367 Post(s)
Liked 771 Times in 311 Posts
Originally Posted by Atlas Shrugged
AliExpress has lugged steel of your choice. No kidney is required unless you choose Renoylds 853.

I am not a C&V guy but look at the fancy lug work on this one, exactly what they always talk about. Fancy Bike
I have seen similar frames from AliExpress, and those are not actually lugs. Look closely at the junction of the headtube and the downtube. The ones that I saw were welded with super thick "lugs" (sectioned and blended) brazed on as a decoration.

ETA- I hope that they are also using counterfeit tubesets, because if not, what a waste.

Last edited by Erzulis Boat; 11-28-22 at 10:37 AM.
Erzulis Boat is offline  
Old 11-28-22, 10:39 AM
  #20  
nlerner
Senior Member
 
Join Date: Dec 2005
Posts: 17,127
Mentioned: 480 Post(s)
Tagged: 0 Thread(s)
Quoted: 3788 Post(s)
Liked 6,574 Times in 2,580 Posts
Originally Posted by Erzulis Boat
I have seen similar frames from AliExpress, and those are not actually lugs. Look closely at the junction of the headtube and the downtube. The ones that I saw were welded with super thick "lugs" (sectioned and blended) brazed on as a decoration.

ETA- I hope that they are also using counterfeit tubesets, because if not, what a waste.
Ah, a C&V throwback to Claud Butler's bi-laminate lugs!
nlerner is offline  
Likes For nlerner:
Old 11-28-22, 10:44 AM
  #21  
Erzulis Boat 
Le Crocodile
 
Erzulis Boat's Avatar
 
Join Date: Oct 2005
Location: Santa Barbara Calif.
Posts: 1,873
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 367 Post(s)
Liked 771 Times in 311 Posts
Originally Posted by nlerner
Ah, a C&V throwback to Claud Butler's bi-laminate lugs!
Yes. Except that the CB ones were more than just eyewash.
Erzulis Boat is offline  
Old 11-28-22, 11:05 AM
  #22  
smd4
Senior Member
 
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,641

Bikes: 1989 Cinelli Supercorsa

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3431 Post(s)
Liked 2,824 Times in 1,723 Posts
The Bianchi L'Eroica and the Cinelli Supercorsa. Both a bit pricy, however. But both are stunning.
smd4 is offline  
Likes For smd4:
Old 11-28-22, 01:38 PM
  #23  
xiaoman1 
Senior Member
 
xiaoman1's Avatar
 
Join Date: Mar 2014
Location: City of Angels
Posts: 5,152

Bikes: A few too many

Mentioned: 42 Post(s)
Tagged: 1 Thread(s)
Quoted: 1359 Post(s)
Liked 2,173 Times in 1,178 Posts
Unless one really wants a "custom" frame, In my estimation, given the cost of the above, I would prefer to buy a complete and high end bicycle......
A complete Colnago (name your poison/preference), would get you in at or under the price of a new frame and its components AND would be a classic to boot!
Best, Ben
__________________
"EVERY PERSON IS GUILTY OF ALL THE GOOD THEY DID NOT DO"
Voltaire

Voice recognition may sometimes create odd spelling and grammatical errors



xiaoman1 is offline  
Old 11-28-22, 01:43 PM
  #24  
Vinnems
Full Member
 
Join Date: Dec 2011
Location: Simi Valley, CA
Posts: 248
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Liked 12 Times in 7 Posts
There's plenty! While there are many small time shops that will build you custom sized frames, some manufactures still make production, stock sized ones. Besides those already mentioned, I bought a De Rosa Nuovo Classico ten or so years ago, and they still make that bike but change the available colors every year. I bought a frame that was a year or two old at the time, so it cost significantly less. Cinelli also has one that comes in some cool colors, too.
With the help of a Japanese salesman at work, I ordered a completed lugged frame bike directly from Panasonic. They keep their line open, and it's all made to order in set sizes. I think it came out to 2500 or 3000 bucks, ready to build.
Vinnems is offline  
Old 11-28-22, 02:09 PM
  #25  
Paul Waque 
Junior Member
 
Join Date: May 2012
Location: Ontario
Posts: 146

Bikes: Road: 1972 Raleigh Competition,1989 Marinoni, 1990 Limongi. MTN: 1990 GT Team Avalanche, 1991 Rocky Mountain Blizzard, GT Team RTS , Rocky Mountain MSL 50 Element, CCM fat bike

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Liked 80 Times in 49 Posts
Originally Posted by reissue59
Marinoni

Marinoni SL image from www.marinoni.qc


The frame is listed at $1400 CDN for stock sizing.
Paul Waque is offline  
Likes For Paul Waque:

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.