The nightmare of NOSness
#1
Senior Member
Thread Starter
Join Date: Apr 2006
Location: Washington County, Vermont, USA
Posts: 3,787
Bikes: 1966 Dawes Double Blue, 1976 Raleigh Gran Sport, 1975 Raleigh Sprite 27, 1980 Univega Viva Sport, 1971 Gitane Tour de France, 1984 Lotus Classique, 1976 Motobecane Grand Record
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 758 Post(s)
Liked 647 Times
in
343 Posts
The nightmare of NOSness
I have a NOS Stronglight chainring in a size I need, but it's not the "correct" style for my Model 93 crankset. The BCD is the same, though, so I could easily just bolt it on and ride it. The slight stylistic mismatch wouldn't matter much to me once it was in place.
What does matter to me is the prospect of throwing away the chainring's NOSness so frivolously. I would much rather start with a used ring that's in the same approximate condition as the rest of the bike.
This is not a new problem for me. Whenever I get my hands on NOS parts (I don't seek them out, but sometimes it happens anyway), I tend to put off using them I'm out of other options. I may be approaching that point now with the Stronglight ring.
Should I see a therapist about this?
What does matter to me is the prospect of throwing away the chainring's NOSness so frivolously. I would much rather start with a used ring that's in the same approximate condition as the rest of the bike.
This is not a new problem for me. Whenever I get my hands on NOS parts (I don't seek them out, but sometimes it happens anyway), I tend to put off using them I'm out of other options. I may be approaching that point now with the Stronglight ring.
Should I see a therapist about this?
__________________
www.redclovercomponents.com
"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
www.redclovercomponents.com
"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
#2
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,347
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1953 Post(s)
Liked 3,634 Times
in
1,671 Posts
Yes. That's my view anyway...
#3
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,291
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,204 Times
in
700 Posts
At some point, I guess you realize it will likely never end up in a museum or finance a vacation, so it's probably living its best life being used on your bike. Besides, with these things, there is still a luster around items you can verify as having "low mileage," so all is not lost. I do understand, though. Probably my most valuable NOS item is a Suntour Ultra 6s freewheel, and I'm grateful that I have a rider-quality identical one that relieves the dilemma for the foreseeable future.
Likes For noobinsf:
#4
Senior Member
Join Date: Aug 2013
Posts: 2,336
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 767 Post(s)
Liked 1,897 Times
in
889 Posts
I'm not a therapist, but can play one on the internet.
What you have is known in the League of Internet Amateur Rehabilitation Specialists as FNOS, or Fear of New Old Stock, scientifically known as Neopalaioapothemaphobia.
Exposure is the best path toward a cure, and the more the better. So, what you should do, in my unprofessional opinion, is designate all NOS parts toward one single NOS build.
That would ease your pain considerably, and perhaps more importantly, would also temporarily satisfy the n+1 rule.
What you have is known in the League of Internet Amateur Rehabilitation Specialists as FNOS, or Fear of New Old Stock, scientifically known as Neopalaioapothemaphobia.
Exposure is the best path toward a cure, and the more the better. So, what you should do, in my unprofessional opinion, is designate all NOS parts toward one single NOS build.
That would ease your pain considerably, and perhaps more importantly, would also temporarily satisfy the n+1 rule.
Likes For BFisher:
#5
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,450
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1820 Post(s)
Liked 3,330 Times
in
1,564 Posts
I've got 3 NOS SunTour New Winner freewheels that I hope to eventually get around to wearing out, after I've worn out my non-pristine ones.
There are still NOS ones out there, if the swap meet tables at the 2018 Classic Rendezvous event are any indication...
although some of them were corn cobs (13-19 teeth, very close range)
Steve in Peoria
#6
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,642
Bikes: 1989 Cinelli Supercorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3431 Post(s)
Liked 2,826 Times
in
1,723 Posts
I feel your pain. That’s why I need two of everything.
#7
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,852
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2151 Post(s)
Liked 3,380 Times
in
1,198 Posts
I build with/use NOS parts whenever possible. Why?
1) There’s a certain frisson of excitement using something that’s never been used before
b) The parts speak to me in dreams and tell me they are much happier being used than sitting in boxes.
Just two data points!
1) There’s a certain frisson of excitement using something that’s never been used before
b) The parts speak to me in dreams and tell me they are much happier being used than sitting in boxes.
Just two data points!
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
Likes For rccardr:
#8
Senior Member
Join Date: Dec 2005
Posts: 17,127
Mentioned: 480 Post(s)
Tagged: 0 Thread(s)
Quoted: 3788 Post(s)
Liked 6,575 Times
in
2,580 Posts
Grind down the teeth and pair it with a 42t ring as a chainguard.
#9
Senior Member
Join Date: Jun 2006
Posts: 20,323
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 3449 Post(s)
Liked 2,800 Times
in
1,974 Posts
I think twice, then install, and use.
I have some NOS components, hubs, chains, rims, they are to be used.
I have some NOS components, hubs, chains, rims, they are to be used.
Likes For repechage:
#10
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 8,237
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3846 Post(s)
Liked 6,437 Times
in
3,183 Posts
Nothing better than nos rings on our old bikes, perfectly straight so we don't have to always be finely trimming the fd, especially in a big gear.
Smear some chain grease on it and fuggedaboutit already, youse!
Smear some chain grease on it and fuggedaboutit already, youse!
#12
Senior Member
Join Date: Jun 2005
Location: In transit
Posts: 1,897
Bikes: 07 Vanilla, 98 IRD road frame built up with 25th Ann DA, Surly cross check with 105 comp, 78 Raleigh Comp GS, 85 Centurionelli
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 87 Post(s)
Liked 923 Times
in
191 Posts
Any time I get too wrapped around the axle on NOS parts, be it bikes, cars, or anything else, I just imagine the heap of stuff left after my demise and the process of a thrift store employee sifting through them. I mean, yeah, some stuff I'll leave instructions for the disposal of, but largely our bike parts will just be recycled into this very community via E Bay. When I picture that heap of bikes and parts it hits me what a ridiculous concern it is and slap that part on and get some miles on it.
Likes For poprad:
#13
Senior Member
Join Date: Dec 2015
Location: Menomonee Falls, WI
Posts: 1,850
Bikes: 1984 Schwinn Supersport, 1988 Trek 400T, 1977 Trek TX900, 1982 Bianchi Champione del Mondo, 1978 Raleigh Supercourse, 1986 Trek 400 Elance, 1991 Waterford PDG OS Paramount, 1971 Schwinn Sports Tourer, 1985 Trek 670
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 601 Post(s)
Liked 1,054 Times
in
530 Posts
I tend to seek out, and many times overpay, for NOS parts. But then I usually install them as fast as I can. I want to be the first to use, and appreciate the look, and function, of a new old stock part. Recently I replaced the chewed up outer chainring on my Trek 670, with one I found on eBay. A pristine nos 49t chainring still in the Campagnolo paper sleeve.
Installed it the same day, and went for a ride, satisfied with the new chainring, chucked the old one into the recycling bin, along with the paper sleeve.
This is CV, why not ride the best version of your old bike now, we are not getting any younger, and this stuff won’t necessarily be appreciated by those that follow.
Tim
Installed it the same day, and went for a ride, satisfied with the new chainring, chucked the old one into the recycling bin, along with the paper sleeve.
This is CV, why not ride the best version of your old bike now, we are not getting any younger, and this stuff won’t necessarily be appreciated by those that follow.
Tim
Last edited by tkamd73; 05-10-22 at 12:41 AM.
Likes For blamester:
#15
verktyg
Join Date: Jul 2006
Location: SF Bay Area
Posts: 4,035
Bikes: Current favorites: 1988 Peugeot Birraritz, 1984 Gitane Super Corsa, 1980s DeRosa, 1981 Bianchi Campione Del Mondo, 1992 Paramount OS, 1988 Colnago Technos, 1985 RalieghUSA SBDU Team Pro
Mentioned: 207 Post(s)
Tagged: 0 Thread(s)
Quoted: 1036 Post(s)
Liked 1,236 Times
in
653 Posts
Two Of Everything...
I have a NOS Stronglight chainring in a size I need, but it's not the "correct" style for my Model 93 crankset. The BCD is the same, though, so I could easily just bolt it on and ride it. The slight stylistic mismatch wouldn't matter much to me once it was in place.
What does matter to me is the prospect of throwing away the chainring's NOSness so frivolously. I would much rather start with a used ring that's in the same approximate condition as the rest of the bike.
This is not a new problem for me. Whenever I get my hands on NOS parts (I don't seek them out, but sometimes it happens anyway), I tend to put off using them I'm out of other options. I may be approaching that point now with the Stronglight ring.
Should I see a therapist about this?
What does matter to me is the prospect of throwing away the chainring's NOSness so frivolously. I would much rather start with a used ring that's in the same approximate condition as the rest of the bike.
This is not a new problem for me. Whenever I get my hands on NOS parts (I don't seek them out, but sometimes it happens anyway), I tend to put off using them I'm out of other options. I may be approaching that point now with the Stronglight ring.
Should I see a therapist about this?
When I got back into collecting (hoarding) bikes in 2006, when I found a mint bike that I really liked, I stored it away and picked up a rider quality of the exact same bike... Since most were upper mid range they would probably not have a lot of resale value to a collector. I've gotten rid of about 4- 5 of my duplicates and in most cases kept the riders. If a bike is too pretty it doesn't get ridden much!
I still have a lot of NOS components....
verktyg
__________________
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Likes For verktyg:
#16
Senior Member
Thread Starter
Join Date: Apr 2006
Location: Washington County, Vermont, USA
Posts: 3,787
Bikes: 1966 Dawes Double Blue, 1976 Raleigh Gran Sport, 1975 Raleigh Sprite 27, 1980 Univega Viva Sport, 1971 Gitane Tour de France, 1984 Lotus Classique, 1976 Motobecane Grand Record
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 758 Post(s)
Liked 647 Times
in
343 Posts
A 46 or 47--47 being my first choice--in the Model 93 pattern. The NOS ring is a 46-tooth for a 105 bis.
__________________
www.redclovercomponents.com
"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
www.redclovercomponents.com
"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
#17
Port
Join Date: Jan 2008
Location: Boston
Posts: 9,496
Bikes: 2022 Soma Fog Cutter, 2021 Calfee Draqonfly 44, 1984 Peter Mooney, 2017 Soma Stanyan, 1990 Fuji Ace, 1990 Bridgestone RB-1, 1995 Independent Fabrications Track, 2003 Calfee Dragonfly Pro
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 971 Post(s)
Liked 1,803 Times
in
1,037 Posts
This reminds me of my latest new (gasp! modern) bike. I spent way too much money on something that immediately lost most of its value, and will impress almost no one at all.
Except me.
And for whatever it is worth, running the "wrong" chainring is definitely cool in my mind.
Also, post a picture!
__________________
https://rowdml.tripod.com/panmass
https://rowdml.tripod.com/panmass
Likes For Rocket-Sauce:
#18
Bikes are okay, I guess.
Join Date: Jan 2015
Location: Richmond, Virginia
Posts: 9,128
Bikes: Waterford Paramount Touring, Giant CFM-2, Raleigh Sports 3-speeds in M23 & L23, Schwinn Cimarron oddball build, Marin Palisades Trail dropbar conversion, Nishiki Cresta GT
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 2647 Post(s)
Liked 2,445 Times
in
1,557 Posts
You think NOS is a headache? Try having a bunch of OOS.
#19
Thrifty Bill
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,572
Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more
Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 958 Times
in
625 Posts
None of my bikes is NOS. So when I obtain an NOS part, I immediately turn it into CASH to fund my bike hobby. Invariably, there are people out there that will gladly pay 2X, 3X, sometimes 10X for a NOS part. Meanwhile, I am happy to continue to obtain lightly used parts for my own builds.
Now on some consumables: tires, cables, housings, chains, I stick to new. But I have used a variety of lightly used chainrings and freewheels.
I have become a HUGE fan of patina, to the point I would prefer somewhat rusty/crusty frame over pristine.
Now on some consumables: tires, cables, housings, chains, I stick to new. But I have used a variety of lightly used chainrings and freewheels.
I have become a HUGE fan of patina, to the point I would prefer somewhat rusty/crusty frame over pristine.
Likes For wrk101:
#20
Senior Member
Join Date: Nov 2005
Location: NW Ohio
Posts: 3,426
Bikes: 1984 Miyata 310, 1986 Schwinn Sierra, 2011 Jamis Quest, 1980 Peugeot TH8 Tandem, 1992 Performance Parabola, 1987 Ross Mt. Hood, 1988 Schwinn LeTour, 1988 Trek 400T, 1981 Fuji S12-S LTD, 197? FW Evans
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 522 Post(s)
Liked 943 Times
in
495 Posts
The shiny, unblemished NOS piece seems to sick out like a sore thumb, even if it is replacing an identical old part. I would only seek out NOS for a bike I am completely rebuilding with new paint and decals or one that looks new already.
Likes For Pompiere:
#21
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,347
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1953 Post(s)
Liked 3,634 Times
in
1,671 Posts
I like to ride my bikes and they never look new and rarely have historically correct parts on them. They are made to be ridden and I enjoy. You can too
#22
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,856
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 104 Post(s)
Tagged: 0 Thread(s)
Quoted: 2304 Post(s)
Liked 2,742 Times
in
1,499 Posts
if i have choice between NOS and used, and the price is not stupid on the NOS i will use NOS.
at the same time I am building a set of duplicates of ultegtra8000 mechanical group, my own NOS for future use
at the same time I am building a set of duplicates of ultegtra8000 mechanical group, my own NOS for future use
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
#23
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,450
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1820 Post(s)
Liked 3,330 Times
in
1,564 Posts
Of course, this does require that you either anticipate your needs, or have reached a point where you don't expect your needs to change significantly.
About 20 years ago, I started putting aside a lot of consumables (chains, freewheels, cassettes, etc) in anticipation of them being hard to find. I'm a bit surprised that I'm running out of 8 and 9 speed cassettes before running out of 7 speed cassettes and 6 speed freewheels, but in general, I think I did okay. Still have 3 NOS SunTour freewheels.
There is always the chance that you'll get stuck with some weird part that no one uses anymore, but that's just part of the gamble.
Steve in Peoria
#24
Senior Member
Join Date: Dec 2015
Location: Menomonee Falls, WI
Posts: 1,850
Bikes: 1984 Schwinn Supersport, 1988 Trek 400T, 1977 Trek TX900, 1982 Bianchi Champione del Mondo, 1978 Raleigh Supercourse, 1986 Trek 400 Elance, 1991 Waterford PDG OS Paramount, 1971 Schwinn Sports Tourer, 1985 Trek 670
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 601 Post(s)
Liked 1,054 Times
in
530 Posts
Tim
Likes For tkamd73:
#25
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,830
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 128 Post(s)
Tagged: 0 Thread(s)
Quoted: 4746 Post(s)
Liked 3,861 Times
in
2,510 Posts
It is something to ponder.. should I wear out a nice piece of gear? ... but if I don't do it, will it be so obsolete that somebody just chucks it into the metal recycling bin??
I've got 3 NOS SunTour New Winner freewheels that I hope to eventually get around to wearing out, after I've worn out my non-pristine ones.
There are still NOS ones out there, if the swap meet tables at the 2018 Classic Rendezvous event are any indication...
although some of them were corn cobs (13-19 teeth, very close range)
Steve in Peoria
I've got 3 NOS SunTour New Winner freewheels that I hope to eventually get around to wearing out, after I've worn out my non-pristine ones.
There are still NOS ones out there, if the swap meet tables at the 2018 Classic Rendezvous event are any indication...
although some of them were corn cobs (13-19 teeth, very close range)
Steve in Peoria
To the topic; I just picked up some lightly to medium used GP4 rims and 2 gorgeous NOS ones. All will get built up and used a lot as soon as I can find the spokes. (Light 302s like DT Revs seem to be impossible to find.)