Drop Bar to Trekking Bar Conversion
#26
Senior Member
Thread Starter
Join Date: Sep 2004
Location: Chicago area
Posts: 2,551
Bikes: Airborne "Carpe Diem", Motobecane "Mirage", Trek 6000, Strida 2, Dahon "Helios XL", Dahon "Mu XL", Tern "Verge S11i"
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 980 Post(s)
Liked 582 Times
in
399 Posts
I got 35 miles in with the new set-up. The thumb-shifter works as easily and as quickly as the original STI shifter. Well, there are only three chainrings ... I'm glad the trigger shifter works well on the rear.
I made some mid-ride adjustments to the angle of the bars and controls, and it seems pretty comfortable.
My "shakedown" route in Lake County, IL.
At the Bog
Nice weather... temps in the 70s.
I made some mid-ride adjustments to the angle of the bars and controls, and it seems pretty comfortable.
My "shakedown" route in Lake County, IL.
At the Bog
Nice weather... temps in the 70s.
#27
Senior Member
Thread Starter
Join Date: Sep 2004
Location: Chicago area
Posts: 2,551
Bikes: Airborne "Carpe Diem", Motobecane "Mirage", Trek 6000, Strida 2, Dahon "Helios XL", Dahon "Mu XL", Tern "Verge S11i"
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 980 Post(s)
Liked 582 Times
in
399 Posts
SInce the "Proof of Concept" worked so well, I splurged a bit and installed a Rivendell thumb shifter. I have to give major props to Rivendell (Vince), who looked at an image of the set-up that worked for me, then replicated it on the desk before telling me which parts to get. I had picked out the exact opposite parts.
Finished conversion to "trekking bars". Friction shifting for the Ultegra front derailleur (triple), and XTR 9-speed for the rear.
Ready to roll!
Finished conversion to "trekking bars". Friction shifting for the Ultegra front derailleur (triple), and XTR 9-speed for the rear.
Ready to roll!
#28
The Wheezing Geezer
Join Date: Oct 2021
Location: Espaņola, NM
Posts: 1,052
Bikes: 1976 Fredo Speciale, Jamis Citizen 1, Ellis-Briggs FAVORI, Rivendell Clem Smith Jr.
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 414 Post(s)
Liked 910 Times
in
445 Posts
Looking good! I like your blue tape.
I separated the brakes and shifters on my butterfly bars. I like it that way, so far.
Butterfly bar setup
My numb nuts solution is a Selle SMP TRK. Numb nuts no more!
Clem Smith Jr. w/ butterfly bars
I like the numerous hand positions, and the seat is the most comfortable for me - I have three of them now.
I separated the brakes and shifters on my butterfly bars. I like it that way, so far.
Butterfly bar setup
My numb nuts solution is a Selle SMP TRK. Numb nuts no more!
Clem Smith Jr. w/ butterfly bars
I like the numerous hand positions, and the seat is the most comfortable for me - I have three of them now.
Likes For Fredo76: