Interesting Set of Wheels
#1
Total Scrounge
Thread Starter
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 884
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
Interesting Set of Wheels
Well, at least I think they're interesting, in a time capsule sort of way. Thanks to philpeugeot for posting the Offer Up link on the ebay/craigslist thread, and apologies to attylah for responding first, but I met a nice young lady in a Shari's parking lot after work, handed her a twenty, and she handed me these:
It seems like someone had a really nice set of wheels built around Phil hubs, and never used them! How often does that happen. I love that everything matches, down to the valve caps.
And the Schwinn Super Record tires.
Weinmann 27 x 1 1/4" Concave rims with eyelets. No wear on the brake tracks, but they seem to be pretty well detensioned, with lots of spoke threads showing. Hmmm. I think these are Schwinn/Borg Union butted spokes, laced 4 cross.
Everything is a little rusty, but the Phil centers are just dusty.
Somebody rode them a little, but only in three of the cogs.
I almost think these should just hang on the wall. We'll see.
It seems like someone had a really nice set of wheels built around Phil hubs, and never used them! How often does that happen. I love that everything matches, down to the valve caps.
And the Schwinn Super Record tires.
Weinmann 27 x 1 1/4" Concave rims with eyelets. No wear on the brake tracks, but they seem to be pretty well detensioned, with lots of spoke threads showing. Hmmm. I think these are Schwinn/Borg Union butted spokes, laced 4 cross.
Everything is a little rusty, but the Phil centers are just dusty.
Somebody rode them a little, but only in three of the cogs.
I almost think these should just hang on the wall. We'll see.
Likes For JacobLee:
#2
Senior Member
Nice find! I came into several tubular / Phil wood wheelsets and one clincher recently. I unlaced them all except one set and the clinchers that I sold on the C&V marketplace. I’m going to hold onto one set of the hubs for a future build.
__________________
Check out www.djcatnap.com for articles on vintage Japanese & French bicycle restorations, components and history.
Check out www.djcatnap.com for articles on vintage Japanese & French bicycle restorations, components and history.
#3
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,262
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3811 Post(s)
Liked 3,336 Times
in
2,176 Posts
-----
yes, the combination of tyres and spokes from Arnie & Co. certainly tell us where they were produced...
(name associated with Union is Berg rather than Borg)
-----
yes, the combination of tyres and spokes from Arnie & Co. certainly tell us where they were produced...
(name associated with Union is Berg rather than Borg)
-----
#5
Full Member
Join Date: Aug 2017
Location: San Mateo, CA
Posts: 253
Bikes: Bike Friday PRP, Bike Friday NWT, Bromton M6R, 1991 Miyata 914, 1991 Miyata 1000, 1986 Raleigh Portage, many more frames
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 215 Post(s)
Liked 347 Times
in
182 Posts
Wow, those are really clean! I'm glad the wheels found their way into the hands of a BF member.
#6
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,858
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,923 Times
in
1,491 Posts
Nice wheels.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Last edited by Bianchigirll; 05-21-22 at 12:38 PM.
Likes For Bianchigirll:
#8
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,262
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3811 Post(s)
Liked 3,336 Times
in
2,176 Posts
#9
Senior Member
Join Date: Jan 2004
Location: Madison, WI USA
Posts: 6,154
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 2363 Post(s)
Liked 1,749 Times
in
1,191 Posts
Didn't these show up on the eBay/CL thread? Shoot, the hubs alone are worth one more zero than what you paid. And 4-cross to Weinmann concaves, guarantees these will survive the zombie apocalypse.
Likes For madpogue:
Likes For JacobLee:
#11
Total Scrounge
Thread Starter
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 884
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
Not sure what the service suggestions are for 40-ish year old cartridge bearings, even if they appear to be unused. It'll also be interesting to see if the nipples turn on the rusty spokes.
#12
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,038
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4510 Post(s)
Liked 6,377 Times
in
3,667 Posts
Yes, I happened to be taking care of some morning business when these were posted to that thread, and I was somehow able to install the OfferUp app and successfully message the seller in record time.
Not sure what the service suggestions are for 40-ish year old cartridge bearings, even if they appear to be unused. It'll also be interesting to see if the nipples turn on the rusty spokes.
Not sure what the service suggestions are for 40-ish year old cartridge bearings, even if they appear to be unused. It'll also be interesting to see if the nipples turn on the rusty spokes.
Check with Phil on the service rec.
Likes For JacobLee:
#14
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,038
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4510 Post(s)
Liked 6,377 Times
in
3,667 Posts
#15
Junior Member
Nice catch! I just received my first set of Phil hubs, also on another set of 27" rims, and 6 speed. I don't know much about them, but IIRC they were considered pretty exotic in the 70s. I DO know they are slick
#16
Senior Member
Join Date: Nov 2015
Posts: 4,485
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 1639 Post(s)
Likes: 0
Liked 829 Times
in
538 Posts
Do not ride those tires..... The sidewalls look to be dry rotted already. Evident from how the plies of the tire carcass are showing....
__________________
72 Line Seeker
83 Davidson Signature
84 Peugeot PSV
84 Peugeot PY10FC
84 Gitane Tour de France.
85 Vitus Plus Carbone 7
86 ALAN Record Carbonio
86 Medici Aerodynamic (Project)
88 Pinarello Montello
89 Bottecchia Professional Chorus SL
95 Trek 5500 OCLV (Project)
72 Line Seeker
83 Davidson Signature
84 Peugeot PSV
84 Peugeot PY10FC
84 Gitane Tour de France.
85 Vitus Plus Carbone 7
86 ALAN Record Carbonio
86 Medici Aerodynamic (Project)
88 Pinarello Montello
89 Bottecchia Professional Chorus SL
95 Trek 5500 OCLV (Project)
#17
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,751 Times
in
938 Posts
Those Weinmann concave rims are GREAT. A bit heavy but darn near bullet proof and they scream vintage all day long. I have both 700c and 27" versions, mounted to different bikes, over the years. The only set, that I have left, is fitted to my late sixties Legnano Grand Premio. I should add that the 700c version come in two widths...
Hang them on the wall? Why not but don't hesitate to use them should an appropriate bike come your way in need of a quality wheel set. Just my opinion. Nice find at an incredible price.
Hang them on the wall? Why not but don't hesitate to use them should an appropriate bike come your way in need of a quality wheel set. Just my opinion. Nice find at an incredible price.
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
#18
Total Scrounge
Thread Starter
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 884
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
Sidewalls are good and crumbly, but the tubes are beautiful. Schwinn Approved, of course:
I could not find an image online similar to the tire label on the tread. I'm sure folks a little older than me are familiar with them. The rim strips were this type, which had deviated from center in many spots:
Thanks to merziac for his advice on lubing and waiting, everything is moving nicely:
Except that my wife got distracted by the sight of a motorcyclist lying in the road after an accident yesterday, and ran into the car in front of her. So now bike fun is on hold while I look for a hood and bumper for a 2006 Mazda3. Everyone was okay, though, including the motorcycle rider, so all is well!
__________________
#19
Total Scrounge
Thread Starter
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 884
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
Only because they were so pristine! I say "were" because I was wiping off the rear hub center yesterday, and noticed that the beautiful Phil script had come right off. Probably inevitable, but it was a yucky feeling.
__________________
#20
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,829 Times
in
1,995 Posts
Yes, I happened to be taking care of some morning business when these were posted to that thread, and I was somehow able to install the OfferUp app and successfully message the seller in record time.
Not sure what the service suggestions are for 40-ish year old cartridge bearings, even if they appear to be unused. It'll also be interesting to see if the nipples turn on the rusty spokes.
Not sure what the service suggestions are for 40-ish year old cartridge bearings, even if they appear to be unused. It'll also be interesting to see if the nipples turn on the rusty spokes.
them the next day loosen the nipples 1 turn each- lube the threads then re- tension.
if any are balky with the unwind- you might consider going a turn more. Having free turning spokes makes all that follows so much easier.
the bearings are of old grease. Some have had good luck removing the outer seals and flushing then replacing the grease.
I have not. I would start with the drive side rear bearing as when assembled is protected by the freewheel.
phil will service the hubs but as I recall want the hubs free and clear - not part of a wheel.
Likes For repechage:
#21
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
Heck if the hubs turn freely, I'd just ride the wheels after properly tensioning the spokes. I've seen old sealed bearing hubs like these that turn freely. Worst case scenario is you need to have Phil Wood replace the sealed bearings. I'm not that familiar with Wood hubs but my recollection is that sealed bearings on the older Wood hubs cannot be readily serviced.
Likes For bikemig:
#22
Total Scrounge
Thread Starter
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 884
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
Baby steps, but the nipples all turn freely, so I was able to completely detention the wheels, mostly with my fingers. Took some brass wool to the rusty spokes. I understand that once they've rusted, there's no sense trying to preserve any zinc coating, so you might as well scrub away and wait for the rust to return. Most of my experience with spokes has been with stainless, so it was interesting how flexible these feel. Must be due to metallurgical properties? Dust seal pried up without trouble, so it looks like I'll be able to flush, grease, and ride!
__________________
#24
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,193
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1565 Post(s)
Liked 1,295 Times
in
865 Posts
I've had only good luck with just leaving the bearings in old Phil hubs alone.
It surprises me, year after year, as I accumulate more (thousands of) miles on them (and as I accumulate more Phil-hubbed wheelsets).
The same seems to be true of bikes such as Kleins and Viscounts, where old pressed-in bottom bracket cartridge bearings give me no trouble while getting no servicing whatsoever.
This bike's spokes appear to be chromed, so will respond well to the brass wool moistened with a bit of WD40.
It surprises me, year after year, as I accumulate more (thousands of) miles on them (and as I accumulate more Phil-hubbed wheelsets).
The same seems to be true of bikes such as Kleins and Viscounts, where old pressed-in bottom bracket cartridge bearings give me no trouble while getting no servicing whatsoever.
This bike's spokes appear to be chromed, so will respond well to the brass wool moistened with a bit of WD40.
#25
Total Scrounge
Thread Starter
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 884
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
I put a spoke gauge on these, and the flexibility of the spokes is probably more to do with them being 2.0 - 1.6. Weird.
I put the rear in the stand after burying the threads at the tops of the nipples, and the rim was waaaay over toward the nds. Almost like they had used two different spoke lengths, but on the wrong sides. Got it round and true and was getting tension even with a Park gauge when "Sproing!" Taco time! Oops, too tight. Backed everything off, made round and straight again, but still lots of threads showing on the nds. Drive sides are at around 100kpf, nds are around 60.
Doesn't seem like a rideable wheel, which is maybe why they were unridden? Sort of curious to remove a spoke from either side and see what's going on. Sort of tempted to unlace these and start over with new spokes.
I put the rear in the stand after burying the threads at the tops of the nipples, and the rim was waaaay over toward the nds. Almost like they had used two different spoke lengths, but on the wrong sides. Got it round and true and was getting tension even with a Park gauge when "Sproing!" Taco time! Oops, too tight. Backed everything off, made round and straight again, but still lots of threads showing on the nds. Drive sides are at around 100kpf, nds are around 60.
Doesn't seem like a rideable wheel, which is maybe why they were unridden? Sort of curious to remove a spoke from either side and see what's going on. Sort of tempted to unlace these and start over with new spokes.
__________________